JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Result Pages:
7/16"-20 x 1/2"-20  - Fuel Inlet Fitting

OAL: 1"
Thread length: .550"
Thread: 7/16-20 male
Thread: 1/2-20 female with inverted flare
Quantity: 1 fitting Accepts 5/16" steel fuel line. Applications:
Holley 4150, 4160 style carburetors
Holley 4165, 4175 carburetors
Holley 4180, 4190 carburetors
Holley 2209, 2210, 2245 style carburetors Note:
Use with inlet gasket # 2233S (sold separately)…see more

Part Number
2218Q
7/16"-24 x 1/2"-20 - Inlet Adaptor Fitting

Hard to find fitting, VERY limited quantities!
Adapts/reduces 5/16" steel fuel line to 1/4" line. Male Threads: 7/16"-24 (Flare fitting)
Female Threads: 1/2"-20 (Flare fitting, 5/16" steel fuel line)
Over all length: .865"
Orifice diameter: .175"
Quantity: 1…see more

Part Number
2218U
7/32" Rubber Vacuum Caps

Rubber vacuum caps are used to plug unused vacuum fittings. Quantity: 5 caps…see more

Part Number
4292
7/8" Inlet Fitting Gaskets - Extra Thick Nylon, 5 pack

Extra thickness and nylon material helps correct leaking inlet fittings.
Inlet fitting gaskets for carburetors with 7/8" diameter inlets.
Quantity: 5 gaskets
Gasket OD" 1.040"
Gasket ID" .875" (7/8")
Gasket Thickness: .062"
Gasket Material: Nylon Fits: Rochester, Carter, Ford/Motorcraft, Holley carburetors. Quadrajet carburetor note:
7/8" inlet fittings are found on all 1965 thru 1971 automobile and truck Quadrajet carburetors, plus all year marine Quadrajet carburetors.
7/8" diameter inlet carburetors can be identified by the location of the inlet gasket, it will be located up against the tightening nut of the inlet fitting. After installation of the 7/8" inlet fitting on the carburetor, the inlet gasket is visible.…see more

Part Number
2231B
7/8" Inlet Fitting Gaskets - Rubber Coated Aluminum, 5 pack

Inlet fitting gaskets for carburetors with 7/8" diameter inlets.
Quantity: 5 gaskets
Gasket OD" 1.06"
Gasket ID" .875" (7/8")
Gasket Thickness: .030"
Rochester OEM Gasket # 7032508 Fits:
Carter AFB, AVS carburetors.
Carter WCFB carburetors.
Carter YF, YFA carburetors.
Ford/Motorcraft 4300, 4350 carburetors.
Ford/Motorcraft 2700 VV, 7200 VV carburetors.
Holley 3160, 4150, 4152, 4160 carburetors.
Holley 4165, 4175 carburetors.
Holley 4180, 4190 carburetors.
Holley 4360 carburetors.
Holley 2300, 2380 carburetors.
Holley 5200, 5210, 5220 carburetors.
Holley 6500, 6510, 6520 carburetors.
Rochester Quadrajet carburetors.
Rochester 4G (Fourjet) carburetors.
Rochester B, BC, BV carburetors.
Rochester H carburetors.
Rochester Monojet carburetors.
Rochester 2G (Twojet) carburetors.
Rochester Dualjet 210 carburetors.
Rochester Varajet carburetors.
May fit other applications with 7/8" fuel fitting. Quadrajet carburetor note:
7/8" inlet fittings are found on all 1965 thru 1971 automobile and truck Quadrajet carburetors, plus all year marine Quadrajet carburetors.
7/8" diameter inlet carburetors can be identified by the location of the inlet gasket, it will be located up against the tightening nut of the inlet fitting. After installation of the 7/8" inlet fitting on the carburetor, the inlet gasket is visible.…see more

Part Number
2231C
7/8" Inlet Fitting Gaskets, 5 pack


Fits Rochester and Carter carburetors - 7/8" diameter inlet QJet carburetors can be identified by...see more

Inlet fitting gaskets for carburetors with 7/8" diameter inlets.
Quantity: 5 gaskets
Gasket OD" 1.055"
Gasket ID" .875" (7/8")
Gasket Thickness: .050"
Rochester OEM Gasket # 7010010 Fits: Rochester, Carter, Ford/Motorcraft, Holley carburetors. Quadrajet carburetor note:
7/8" inlet fittings are found on all 1965 thru 1971 automobile and truck Quadrajet carburetors, plus all year marine Quadrajet carburetors.
7/8" diameter inlet carburetors can be identified by the location of the inlet gasket, it will be located up against the tightening nut of the inlet fitting. After installation of the 7/8" inlet fitting on the carburetor, the inlet gasket is visible.…see more

Part Number
2231
7/8" x 1/2"-20 - O-Ring Inlet Repair Fitting

Very Limited Quantities! Fits:
Holley carburetors with 7/8" inlet threads.
Rochester Monojet carburetors
Do not use with Rochester 2 bore or Rochester Quadrajet. Thread: 1/2-20 female w/ inverted flare
O-ringed repair fitting repairs carburetors with stripped fuel inlet threads. Expanding dual "O" ring fitting effectively repairs leaks at the fuel inlet caused by stripped or damaged threads in the carburetor casting.
For use with carburetors with 7/8" diameter inlet fitting and 5/16" gas line. Note: You will need to install an in-line fuel filter, as this inlet fitting will not allow the use of the stock style fuel filter. Click here for Installation Instructions.…see more

Part Number
2205A
7/8" x 5/8"-18 - O-Ring Inlet Repair Fitting

Very Limited Quantities! Fits:
Holley carburetors with 7/8" inlet threads.
Rochester Monojet carburetors
Do not use with Rochester 2 bore or Rochester Quadrajet. Thread: 5/8-18 female w/ inverted flare
O-ringed repair fitting repairs carburetors with stripped fuel inlet threads. Expanding dual "O" ring fitting effectively repairs leaks at the fuel inlet caused by stripped or damaged threads in the carburetor casting.
For use with carburetors with 7/8" diameter inlet fitting and 3/8" gas line. Note: You will need to install an in-line fuel filter, as this inlet fitting will not allow the use of the stock style fuel filter. Click here for Installation Instructions.…see more

Part Number
2204A
7/8"-20 Inlet Plug & Gasket

Over-all length: .785"
Thread: 7/8-20 male
Quanity: 1 fitting & 1 gasket
Material: Steel Gasket is included with fitting. Applications:
Holley carburetors…see more

Part Number
2218S
7/8"-20 x #6 AN  - Adapter Inlet Fitting


Adapter fitting replaces OEM Inlet Fitting and screws into Rochester Quadrajet & 2G casting using...see more

Aluminum adapter inlet fitting allows use of high performance racing fuel hoses and fittings. Adapter fitting replaces OEM Inlet Fitting and screws into Rochester Quadrajet & 2G casting using the original style sealing gasket. Number 6 AN male fitting is flared to accept standard #6 AN female hose fittings. Great for high horsepower application where custom steel braided fuel line is used. No machine work or tapping is required, adapter uses standard Rochester 7/8"-20 threads. Seal is included with fitting. Fits Rochester Quadrajet, 2G, Holley
Quantity: 1 fitting Replacement gaskets available:
#2231 Quadrajet carburetor note:
7/8" inlet fittings are found on all 1965 thru 1971 automobile and truck Quadrajet carburetors, plus all year marine Quadrajet carburetors.
7/8" diameter inlet carburetors can be identified by the location of the inlet gasket, it will be located up against the tightening nut of the inlet fitting. After installation of the 7/8" inlet fitting on the carburetor, the inlet gasket is visible.…see more

Part Number
2222
7/8"-20 x 1/2-20 - Self Tapping Inlet Fitting

Very Limited Quantity available.
Self tapping inlet fitting for use with 7/8" diameter inlet with 5/16" gas line. Includes new inlet gasket. Uses short fuel filter. Self tapping repair fitting repairs Rochester carburetors with stripped threads. Made of tough steel, this over-sized self tapping fitting will cut and engage new threads. Quick and easy to install. Fits Rochester Quadrajet, 2G
Quantity: 1 fitting Installation Instructions:
This fitting has an oversize thread with the cutting action of a tap. Use care to start it straight.
For good cutting action, rotate the new fitting 1/2 turn forward, then back it up 1/4 turn, then forward 1/2 turn, continue until the new fitting bottoms with the hex section of the fitting against the casting.
Remove the fitting and clean all metal cuttings from both the carburetor cavity and the fitting.
Install the filter element spring, filter, gasket and fitting.
Re-install carb and test carefully for leaks, with engine running and full fuel pump pressure at the carburetor.
If any leakage occurs in final test, DO NOT USE, until proper corrective action has been taken.
Note: #2231B (Extra thick nylon gaskets - sold separately) offers additional sealing capability and may help seal fitting if leakage is encountered. Note: Fitting color may be Black, Silver or Gold. Quadrajet carburetor note:
7/8" inlet fittings are found on all 1965 thru 1971 automobile and truck Quadrajet carburetors, plus all year marine Quadrajet carburetors.
7/8" diameter inlet carburetors can be identified by the location of the inlet gasket, it will be located up against the tightening nut of the inlet fitting. After installation of the 7/8" inlet fitting on the carburetor, the inlet gasket is visible.…see more

Part Number
2203
7/8"-20 x 1/2"-20  - Inlet Fitting


Replacement Inlet fitting. Seal is included with fitting. OAL: .650"...see more

Fits:
Rochester Quadrajet carburetors
Fits Rochester 4G carburetors
Fits Rochester 2G carburetors
Carter / Edelbrock AFB, AVS carburetors
Carter WCFB carburetors
Holley carburetors OAL: .650"
Thread length: .300"
Male Thread: 7/8-20 male
Female Thread: 1/2-20 female w/ inverted flare (accepts 5/16" steel gas line) Quantity: 1 (Seal is included with fitting) Replacement gaskets available:
#2231 Quadrajet carburetor note:
7/8" inlet fittings are found on all 1965 thru 1971 automobile and truck Quadrajet carburetors, plus all year marine Quadrajet carburetors.
7/8" diameter inlet carburetors can be identified by the location of the inlet gasket, it will be located up against the tightening nut of the inlet fitting. After installation of the 7/8" inlet fitting on the carburetor, the inlet gasket is visible.…see more

Part Number
2218E
7/8"-20 x 1/8"-Pipe Thread  - .500" Extended Thread Inlet Fittin

Replacement Inlet fitting has extended threads to grab deeper into carburetor castings. Many main body castings have threads that are not used by OEM inlet fitting. Seal is included with fitting. Fits carburetors with 7/8" inlets, uses short fuel filter. OAL: .900"
Thread length: .500"
Thread: 7/8-20 male
Thread: 1/8 pipe thread
Quantity: 1 fitting Replacement gaskets available:
#2231 Quadrajet carburetor note:
7/8" inlet fittings are found on all 1965 thru 1971 automobile and truck Quadrajet carburetors, plus all year marine Quadrajet carburetors.
7/8" diameter inlet carburetors can be identified by the location of the inlet gasket, it will be located up against the tightening nut of the inlet fitting. After installation of the 7/8" inlet fitting on the carburetor, the inlet gasket is visible.…see more

Part Number
2218B
7/8"-20 x 5/8"-18  - .500" Extended Thread Inlet Fitting


Replacement Inlet fitting has extended threads to grab deeper into carburetor castings....see more

Replacement Inlet fitting has extended threads to grab deeper into carburetor castings. No machine work or tapping is required, many main body castings have threads that are not used by OEM inlet fitting. This is not a self tapping fitting. Seal is included with fitting. Fits carburetors with 7/8" inlets and 3/8" gas line, uses short fuel filter. OAL: 1.07"
Thread length: .500"
Thread: 7/8-20 male
Thread: 5/8-18 female w/ inverted flare Fits Rochester Quadrajet, 2G, Varajet Fits Carter / Edelbrock AFB, AVS
Quantity: 1 Fitting & 1 Gasket Replacement gaskets available:
#2231 Quadrajet carburetor note:
7/8" inlet fittings are found on all 1965 thru 1971 automobile and truck Quadrajet carburetors, plus all year marine Quadrajet carburetors.
7/8" diameter inlet carburetors can be identified by the location of the inlet gasket, it will be located up against the tightening nut of the inlet fitting. After installation of the 7/8" inlet fitting on the carburetor, the inlet gasket is visible.…see more

Part Number
2206
7/8"-20 x 5/8"-18  - .650" Extended Thread Inlet Fitting


Replacement Inlet fitting has extended threads to grab deeper into carburetor castings. No machine work or tapping is required...see more

Replacement Inlet fitting has extended threads to grab deeper into carburetor castings. No machine work or tapping is required, many main body castings have threads that are not used by OEM inlet fitting. Verify that your main body casting has sufficient threads to accept this extended thread fitting. This is not a self tapping fitting. Seal is included with fitting. Fits carburetors with 7/8" inlets and 3/8" gas line, uses short fuel filter. OAL: 1.100"
Thread length: .650"
Thread: 7/8-20 male
Thread: 5/8-18 female w/ inverted flare Fits Rochester Quadrajet, 2G
Fits Carter / Edelbrock AFB, AVS
Quantity: 1 Fitting & 1 Gasket Replacement gaskets available:
#2231 Quadrajet carburetor note:
7/8" inlet fittings are found on all 1965 thru 1971 automobile and truck Quadrajet carburetors, plus all year marine Quadrajet carburetors.
7/8" diameter inlet carburetors can be identified by the location of the inlet gasket, it will be located up against the tightening nut of the inlet fitting. After installation of the 7/8" inlet fitting on the carburetor, the inlet gasket is visible.…see more

Part Number
2217
7/8"-20 x 5/8"-18  - HOLLEY Inlet Fitting

Originally designed for Holley side fuel bowl carburetors as it allows additional fuel bowl screw boss clearence, but it can be used on other carburetor types that accept 7/8"-20 threads. Fits:
Rochester Quadrajet carburetors
Fits Rochester 4G carburetors
Fits Rochester 2G carburetors
Carter / Edelbrock AFB, AVS carburetors
Carter WCFB carburetors
Holley carburetors Specifications:
OAL: .775"
Thread length: .330"
Male Thread: 7/8-20 male
Hex-head size: 1" (Wrench size)
Female Thread: 5/8-18 female w/ inverted flare (accepts 3/8" steel gas line) Quantity: 1 (Seal is included with fitting) Replacement gasket/seal available:
#2231  …see more

Part Number
2207
7/8"-20 x 5/8"-18  - Inlet Fitting (long)


Replacement Inlet fitting fits Rochester Quadrajet and 2G carburetors. Seal is included with fitting....see more

Replacement Inlet fitting fits Rochester Quadrajet and 2G carburetors. Seal is included with fitting. Fits Rochester carburetors with 7/8" inlets and 3/8" gas line, uses long fuel filter. Thread: 7/8-20 male
Thread: 5/8-18 female w/ inverted flare Fits Rochester Quadrajet, 2G
Quantity: 1 Fitting & 1 Gasket Replacement gaskets available:
#2231 Quadrajet carburetor note:
7/8" inlet fittings are found on all 1965 thru 1971 automobile and truck Quadrajet carburetors, plus all year marine Quadrajet carburetors.
7/8" diameter inlet carburetors can be identified by the location of the inlet gasket, it will be located up against the tightening nut of the inlet fitting. After installation of the 7/8" inlet fitting on the carburetor, the inlet gasket is visible.…see more

Part Number
2213
7/8"-20 x 5/8"-18  - Self Tapping Inlet Fitting


Thread: 7/8-20 male (Thread length: .525")
Thread: 5/8-18 female w/ inverted flare
Quantity: 1 fitting and 1 gasket Fits Rochester Quadrajet, 2G Limited quantities available. Self tapping inlet fitting for use with 7/8" diameter inlet with 3/8" steel fuel line. Includes new inlet gasket. Uses short fuel filter. This self-tapping fitting, made of tough steel will reach deeper into the body casting, cutting and engaging new threads. Installation Instructions:
This fitting has an oversize thread with the cutting action of a tap. Use care to start it straight.
For good cutting action, rotate the new fitting 1/2 turn forward, then back it up 1/4 turn, then forward 1/2 turn, continue until the new fitting bottoms with the hex section of the fitting against the casting.
Remove the fitting and clean all metal cuttings from both the carburetor cavity and the fitting.
Install the filter element spring, filter, gasket and fitting.
Re-install carb and test carefully for leaks, with engine running and full fuel pump pressure at the carburetor.
If any leakage occurs in final test, DO NOT USE, until proper corrective action has been taken.
Note: #2231B (Extra thick nylon gaskets - sold separately) offers additional sealing capability and may help seal fitting if leakage is encountered. Note: Fitting color may be Black, Silver or Gold. Quadrajet carburetor note:
7/8" inlet fittings are found on all 1965 thru 1971 automobile and truck Quadrajet carburetors, plus all year marine Quadrajet carburetors.
7/8" diameter inlet carburetors can be identified by the location of the inlet gasket, it will be located up against the tightening nut of the inlet fitting. After installation of the 7/8" inlet fitting on the carburetor, the inlet gasket is visible.…see more

Part Number
2202A
7/8"-20 x 5/8"-18  - Self Tapping Inlet Fitting (Long)

Very Limited Quantities!
Self tapping inlet fitting for use with 7/8" diameter inlet with 3/8" gas line. Includes new inlet gasket. Uses long fuel filter. Self tapping repair fitting repairs Rochester carburetors with stripped threads. Made of tough steel, this self tapping fitting will reach deeper into the main-body casting, cut and engage new threads. Quick and easy to install.
Thread: 7/8-20 male
Thread: 5/8-18 female w/ inverted flare Fits Rochester Quadrajet, 2G
Quantity: 1 Installation Instructions:
This fitting has an oversize thread with the cutting action of a tap. Use care to start it straight.
For good cutting action, rotate the new fitting 1/2 turn forward, then back it up 1/4 turn, then forward 1/2 turn, continue until the new fitting bottoms with the hex section of the fitting against the casting.
Remove the fitting and clean all metal cuttings from both the carburetor cavity and the fitting.
Install the filter element spring, filter, gasket and fitting.
Re-install carb and test carefully for leaks, with engine running and full fuel pump pressure at the carburetor.
If any leakage occurs in final test, DO NOT USE, until proper corrective action has been taken.
Note: #2231B (Extra thick nylon gaskets - sold separately) offers additional sealing capability and may help seal fitting if leakage is encountered. Note: Fitting color may be Black, Silver or Gold. Quadrajet carburetor note:
7/8" inlet fittings are found on all 1965 thru 1971 automobile and truck Quadrajet carburetors, plus all year marine Quadrajet carburetors.
7/8" diameter inlet carburetors can be identified by the location of the inlet gasket, it will be located up against the tightening nut of the inlet fitting. After installation of the 7/8" inlet fitting on the carburetor, the inlet gasket is visible.…see more

Part Number
2202
7/8"-20 x 7/16"-24  - .500" Extended Thread Inlet Fitting

Replacement inlet fitting has extended threads to grab deeper into carburetor castings. Many main body castings have threads that are not used by OEM inlet fitting. Seal is included with fitting. Fits carburetors with 7/8" inlets, uses short fuel filter. OAL: .900"
Thread length: .500"
Thread: 7/8-20 male
Thread: 7/16-24 female
Quantity: 1 fitting & 1 Gasket…see more

Part Number
2218I
Result Pages: