QuadrajetParts.com - Carburetor Parts Superstore
Carburetor Parts & Rebuild Kits for Carter, Holley, Ford, Rochester & Stromberg.
7/16"-20 x 1/2"-20 - Fuel Inlet Fitting
OAL: 1"
Thread length: .550"
Thread: 7/16-20 male
Thread: 1/2-20 female with inverted flare
Quantity: 1 fitting
Accepts 5/16" steel fuel line.
Applications:
Holley 4150, 4160 style carburetors
Holley 4165, 4175 carburetors
Holley 4180, 4190 carburetors
Holley 2209, 2210, 2245 style carburetors
Note:
Use with inlet gasket # 2233S (sold separately)…see more
- Part Number
- 2218Q
7/16"-24 x 1/2"-20 - Inlet Adaptor Fitting
Hard to find fitting, VERY limited quantities!
Adapts/reduces 5/16" steel fuel line to 1/4" line.
Male Threads: 7/16"-24 (Flare fitting)
Female Threads: 1/2"-20 (Flare fitting, 5/16" steel fuel line)
Over all length: .865"
Orifice diameter: .175"
Quantity: 1…see more
- Part Number
- 2218U
7/32" Rubber Vacuum Caps
Rubber vacuum caps are used to plug unused vacuum fittings. Quantity: 5 caps…see more
- Part Number
- 4292
7/8" Inlet Fitting Gaskets - Extra Thick Nylon, 5 pack
Extra thickness and nylon material helps correct leaking inlet fittings.
Inlet fitting gaskets for carburetors with 7/8" diameter inlets.
Quantity: 5 gaskets
Gasket OD" 1.040"
Gasket ID" .875" (7/8")
Gasket Thickness: .062"
Gasket Material: Nylon
Fits: Rochester, Carter, Ford/Motorcraft, Holley carburetors.
Quadrajet carburetor note:
7/8" inlet fittings are found on all 1965 thru 1971 automobile and truck Quadrajet carburetors, plus all year marine Quadrajet carburetors.
7/8" diameter inlet carburetors can be identified by the location of the inlet gasket, it will be located up against the tightening nut of the inlet fitting. After installation of the 7/8" inlet fitting on the carburetor, the inlet gasket is visible.…see more
- Part Number
- 2231B
7/8" Inlet Fitting Gaskets - Rubber Coated Aluminum, 5 pack
Inlet fitting gaskets for carburetors with 7/8" diameter inlets.
Quantity: 5 gaskets
Gasket OD" 1.06"
Gasket ID" .875" (7/8")
Gasket Thickness: .030"
Rochester OEM Gasket # 7032508
Fits:
Carter AFB, AVS carburetors.
Carter WCFB carburetors.
Carter YF, YFA carburetors.
Ford/Motorcraft 4300, 4350 carburetors.
Ford/Motorcraft 2700 VV, 7200 VV carburetors.
Holley 3160, 4150, 4152, 4160 carburetors.
Holley 4165, 4175 carburetors.
Holley 4180, 4190 carburetors.
Holley 4360 carburetors.
Holley 2300, 2380 carburetors.
Holley 5200, 5210, 5220 carburetors.
Holley 6500, 6510, 6520 carburetors.
Rochester Quadrajet carburetors.
Rochester 4G (Fourjet) carburetors.
Rochester B, BC, BV carburetors.
Rochester H carburetors.
Rochester Monojet carburetors.
Rochester 2G (Twojet) carburetors.
Rochester Dualjet 210 carburetors.
Rochester Varajet carburetors.
May fit other applications with 7/8" fuel fitting.
Quadrajet carburetor note:
7/8" inlet fittings are found on all 1965 thru 1971 automobile and truck Quadrajet carburetors, plus all year marine Quadrajet carburetors.
7/8" diameter inlet carburetors can be identified by the location of the inlet gasket, it will be located up against the tightening nut of the inlet fitting. After installation of the 7/8" inlet fitting on the carburetor, the inlet gasket is visible.…see more
- Part Number
- 2231C
7/8" Inlet Fitting Gaskets, 5 pack
Fits Rochester and Carter carburetors - 7/8" diameter inlet QJet carburetors can be identified by...see more
Inlet fitting gaskets for carburetors with 7/8" diameter inlets.
Quantity: 5 gaskets
Gasket OD" 1.055"
Gasket ID" .875" (7/8")
Gasket Thickness: .050"
Rochester OEM Gasket # 7010010
Fits: Rochester, Carter, Ford/Motorcraft, Holley carburetors.
Quadrajet carburetor note:
7/8" inlet fittings are found on all 1965 thru 1971 automobile and truck Quadrajet carburetors, plus all year marine Quadrajet carburetors.
7/8" diameter inlet carburetors can be identified by the location of the inlet gasket, it will be located up against the tightening nut of the inlet fitting. After installation of the 7/8" inlet fitting on the carburetor, the inlet gasket is visible.…see more
- Part Number
- 2231
7/8" x 1/2"-20 - O-Ring Inlet Repair Fitting
Very Limited Quantities!
Fits:
Holley carburetors with 7/8" inlet threads.
Rochester Monojet carburetors
Do not use with Rochester 2 bore or Rochester Quadrajet.
Thread: 1/2-20 female w/ inverted flare
O-ringed repair fitting repairs carburetors with stripped fuel inlet threads. Expanding dual "O" ring fitting effectively repairs leaks at the fuel inlet caused by stripped or damaged threads in the carburetor casting.
For use with carburetors with 7/8" diameter inlet fitting and 5/16" gas line.
Note: You will need to install an in-line fuel filter, as this inlet fitting will not allow the use of the stock style fuel filter.…see more
- Part Number
- 2205A
7/8" x 5/8"-18 - O-Ring Inlet Repair Fitting
Very Limited Quantities!
Fits:
Holley carburetors with 7/8" inlet threads.
Rochester Monojet carburetors
Do not use with Rochester 2 bore or Rochester Quadrajet.
Thread: 5/8-18 female w/ inverted flare
O-ringed repair fitting repairs carburetors with stripped fuel inlet threads. Expanding dual "O" ring fitting effectively repairs leaks at the fuel inlet caused by stripped or damaged threads in the carburetor casting.
For use with carburetors with 7/8" diameter inlet fitting and 3/8" gas line.
Note: You will need to install an in-line fuel filter, as this inlet fitting will not allow the use of the stock style fuel filter.…see more
- Part Number
- 2204A
7/8"-20 Inlet Plug & Gasket
Over-all length: .785"
Thread: 7/8-20 male
Quanity: 1 fitting & 1 gasket
Material: Steel
Gasket is included with fitting.
Applications:
Holley carburetors…see more
- Part Number
- 2218S
7/8"-20 x #6 AN - Adapter Inlet Fitting
Adapter fitting replaces OEM Inlet Fitting and screws into Rochester Quadrajet & 2G casting using...see more
Aluminum adapter inlet fitting allows use of high performance racing fuel hoses and fittings. Adapter fitting replaces OEM Inlet Fitting and screws into Rochester Quadrajet & 2G casting using the original style sealing gasket. Number 6 AN male fitting is flared to accept standard #6 AN female hose fittings. Great for high horsepower application where custom steel braided fuel line is used.
No machine work or tapping is required, adapter uses standard Rochester 7/8"-20 threads. Seal is included with fitting.
Fits Rochester Quadrajet, 2G, Holley
Quantity: 1 fitting
Replacement gaskets available:
#2231
Quadrajet carburetor note:
7/8" inlet fittings are found on all 1965 thru 1971 automobile and truck Quadrajet carburetors, plus all year marine Quadrajet carburetors.
7/8" diameter inlet carburetors can be identified by the location of the inlet gasket, it will be located up against the tightening nut of the inlet fitting. After installation of the 7/8" inlet fitting on the carburetor, the inlet gasket is visible.…see more
- Part Number
- 2222
7/8"-20 x 1/2"-20 - .400" Thread Inlet Fitting
OEM # 7013525...see more
OAL: .800"
Thread length: .400"
Thread: 7/8-20 male
Thread: 1/2-20 female with inverted flare
OEM # 7013525
Quantity: 1 fitting & 1 gasket Replacement Inlet fitting has .400" threads to grab deep into the carburetor casting. Accepts 5/16" steel fuel line. Gasket is included with fitting.
Note: Ensure that carburetor casting has sufficient threads to accept deeper fitting.
Applications:
Rochester 2G (Two Jet) carburetors
Carter YF, YFA carburetors
Holley carburetors
Replacement gaskets available:
2231…see more
- Part Number
- 2218A
7/8"-20 x 1/2"-20 - Inlet Fitting
Replacement Inlet fitting. Seal is included with fitting.
OAL: .650"...see more
Fits:
Rochester Quadrajet carburetors
Fits Rochester 4G carburetors
Fits Rochester 2G carburetors
Carter / Edelbrock AFB, AVS carburetors
Carter WCFB carburetors
Holley carburetors
OAL: .650"
Thread length: .300"
Male Thread: 7/8-20 male
Female Thread: 1/2-20 female w/ inverted flare (accepts 5/16" steel gas line)
Quantity: 1 (Seal is included with fitting)
Replacement gaskets available:
#2231
Quadrajet carburetor note:
7/8" inlet fittings are found on all 1965 thru 1971 automobile and truck Quadrajet carburetors, plus all year marine Quadrajet carburetors.
7/8" diameter inlet carburetors can be identified by the location of the inlet gasket, it will be located up against the tightening nut of the inlet fitting. After installation of the 7/8" inlet fitting on the carburetor, the inlet gasket is visible.…see more
- Part Number
- 2218E
7/8"-20 x 1/8"-Pipe Thread - .500" Extended Thread Inlet Fittin
Replacement Inlet fitting has extended threads to grab deeper into carburetor castings. Many main body castings have threads that are not used by OEM inlet fitting.
Seal is included with fitting. Fits carburetors with 7/8" inlets, uses short fuel filter.
OAL: .900"
Thread length: .500"
Thread: 7/8-20 male
Thread: 1/8 pipe thread
Quantity: 1 fitting
Replacement gaskets available:
#2231
Quadrajet carburetor note:
7/8" inlet fittings are found on all 1965 thru 1971 automobile and truck Quadrajet carburetors, plus all year marine Quadrajet carburetors.
7/8" diameter inlet carburetors can be identified by the location of the inlet gasket, it will be located up against the tightening nut of the inlet fitting. After installation of the 7/8" inlet fitting on the carburetor, the inlet gasket is visible.…see more
- Part Number
- 2218B
7/8"-20 x 5/8"-18 - .500" Extended Thread Inlet Fitting
Replacement Inlet fitting has extended threads to grab deeper into carburetor castings....see more
Replacement Inlet fitting has extended threads to grab deeper into carburetor castings. No machine work or tapping is required, many main body castings have threads that are not used by OEM inlet fitting.
This is not a self tapping fitting. Seal is included with fitting. Fits carburetors with 7/8" inlets and 3/8" gas line, uses short fuel filter.
OAL: 1.07"
Thread length: .500"
Thread: 7/8-20 male
Thread: 5/8-18 female w/ inverted flare
Fits Rochester Quadrajet, 2G, Varajet
Fits Carter / Edelbrock AFB, AVS
Quantity: 1 Fitting & 1 Gasket
Replacement gaskets available:
#2231
Quadrajet carburetor note:
7/8" inlet fittings are found on all 1965 thru 1971 automobile and truck Quadrajet carburetors, plus all year marine Quadrajet carburetors.
7/8" diameter inlet carburetors can be identified by the location of the inlet gasket, it will be located up against the tightening nut of the inlet fitting. After installation of the 7/8" inlet fitting on the carburetor, the inlet gasket is visible.…see more
- Part Number
- 2206
7/8"-20 x 5/8"-18 - .650" Extended Thread Inlet Fitting
Replacement Inlet fitting has extended threads to grab deeper into carburetor castings. No machine work or tapping is required...see more
Replacement Inlet fitting has extended threads to grab deeper into carburetor castings. No machine work or tapping is required, many main body castings have threads that are not used by OEM inlet fitting. Verify that your main body casting has sufficient threads to accept this extended thread fitting.
This is not a self tapping fitting. Seal is included with fitting. Fits carburetors with 7/8" inlets and 3/8" gas line, uses short fuel filter.
OAL: 1.100"
Thread length: .650"
Thread: 7/8-20 male
Thread: 5/8-18 female w/ inverted flare
Fits Rochester Quadrajet, 2G
Fits Carter / Edelbrock AFB, AVS
Quantity: 1 Fitting & 1 Gasket
Replacement gaskets available:
#2231
Quadrajet carburetor note:
7/8" inlet fittings are found on all 1965 thru 1971 automobile and truck Quadrajet carburetors, plus all year marine Quadrajet carburetors.
7/8" diameter inlet carburetors can be identified by the location of the inlet gasket, it will be located up against the tightening nut of the inlet fitting. After installation of the 7/8" inlet fitting on the carburetor, the inlet gasket is visible.…see more
- Part Number
- 2217
7/8"-20 x 5/8"-18 - HOLLEY Inlet Fitting
Originally designed for Holley side fuel bowl carburetors as it allows additional fuel bowl screw boss clearence, but it can be used on other carburetor types that accept 7/8"-20 threads.
Fits:
Rochester Quadrajet carburetors
Fits Rochester 4G carburetors
Fits Rochester 2G carburetors
Carter / Edelbrock AFB, AVS carburetors
Carter WCFB carburetors
Holley carburetors
Specifications:
OAL: .775"
Thread length: .330"
Male Thread: 7/8-20 male
Hex-head size: 1" (Wrench size)
Female Thread: 5/8-18 female w/ inverted flare (accepts 3/8" steel gas line)
Quantity: 1 (Seal is included with fitting)
Replacement gasket/seal available:
#2231
…see more
- Part Number
- 2207
7/8"-20 x 5/8"-18 - Inlet Fitting (long)
Replacement Inlet fitting fits Rochester Quadrajet and 2G carburetors.
Seal is included with fitting....see more
Replacement Inlet fitting fits Rochester Quadrajet and 2G carburetors.
Seal is included with fitting. Fits Rochester carburetors with 7/8" inlets and 3/8" gas line, uses long fuel filter.
Thread: 7/8-20 male
Thread: 5/8-18 female w/ inverted flare
Fits Rochester Quadrajet, 2G
Quantity: 1 Fitting & 1 Gasket
Replacement gaskets available:
#2231
Quadrajet carburetor note:
7/8" inlet fittings are found on all 1965 thru 1971 automobile and truck Quadrajet carburetors, plus all year marine Quadrajet carburetors.
7/8" diameter inlet carburetors can be identified by the location of the inlet gasket, it will be located up against the tightening nut of the inlet fitting. After installation of the 7/8" inlet fitting on the carburetor, the inlet gasket is visible.…see more
- Part Number
- 2213
7/8"-20 x 5/8"-18 - Self Tapping Inlet Fitting (Long)
Very Limited Quantities!
Self tapping inlet fitting for use with 7/8" diameter inlet with 3/8" gas line. Includes new inlet gasket. Uses long fuel filter.
Self tapping repair fitting repairs Rochester carburetors with stripped threads. Made of tough steel, this self tapping fitting will reach deeper into the main-body casting, cut and engage new threads. Quick and easy to install.
Thread: 7/8-20 male
Thread: 5/8-18 female w/ inverted flare
Fits Rochester Quadrajet, 2G
Quantity: 1
Installation Instructions:
This fitting has an oversize thread with the cutting action of a tap. Use care to start it straight.
For good cutting action, rotate the new fitting 1/2 turn forward, then back it up 1/4 turn, then forward 1/2 turn, continue until the new fitting bottoms with the hex section of the fitting against the casting.
Remove the fitting and clean all metal cuttings from both the carburetor cavity and the fitting.
Install the filter element spring, filter, gasket and fitting.
Re-install carb and test carefully for leaks, with engine running and full fuel pump pressure at the carburetor.
If any leakage occurs in final test, DO NOT USE, until proper corrective action has been taken.
Note: #2231B (Extra thick nylon gaskets - sold separately) offers additional sealing capability and may help seal fitting if leakage is encountered.
Note: Fitting color may be Black, Silver or Gold.
Quadrajet carburetor note:
7/8" inlet fittings are found on all 1965 thru 1971 automobile and truck Quadrajet carburetors, plus all year marine Quadrajet carburetors.
7/8" diameter inlet carburetors can be identified by the location of the inlet gasket, it will be located up against the tightening nut of the inlet fitting. After installation of the 7/8" inlet fitting on the carburetor, the inlet gasket is visible.…see more
- Part Number
- 2202
7/8"-20 x 7/16"-24 - .500" Extended Thread Inlet Fitting
Replacement inlet fitting has extended threads to grab deeper into carburetor castings. Many main body castings have threads that are not used by OEM inlet fitting.
Seal is included with fitting. Fits carburetors with 7/8" inlets, uses short fuel filter.
OAL: .900"
Thread length: .500"
Thread: 7/8-20 male
Thread: 7/16-24 female
Quantity: 1 fitting & 1 Gasket…see more
- Part Number
- 2218I
- Servicing Bi-Metal Choke Springs
- Ethanol (E-10) fuel in carbureted engines
- Where do I locate my carburetor number?
- How to Test a Vacuum Break / Pulloff
- #4802 Idle Pickup Tubes
- #3622 Power Piston Retaining Bushing
- O-Ring Inlet Repair Fuel Fitting
- #2702 Secondary Air Valve Spring Tension
- #4231B - Air Cleaner Repair Bracket
- Needle & Seats
- #2701 Secondary Air Valve Cam Replacement
- #2460-82 Changing Primary Metering Jets
- #2251/2252/2253 Fuel Filter Replacement
- #1742/1743 Secondary Well Plug Fix
- Float level adjustment for Quadrajet and Dualjet Carburetor
- Servicing the tamper resistant choke cover on Rochester carbs
- #1310-SR Mixture Control Solenoid Adjust
- What is a Carter Quadrajet?
- Quadrajet Model Designations
- Edelbrock Quadrajets
- #1003 Accelerator Pump Styles
- Exploded View 4MV 1975 thru
- Exploded View 4MV 1971 thru 1974
- Exploded View 4MV 1967 thru 1970
- Exploded View 4MV 1966
- Fuel Pressure
- Power Piston & Primary Metering Rods
- Fuel Inlets
- Exploded View 2G / 2GV
All Topics
- Carburetor Tech Info
- Mercury Marine Mercarb Carbureto
- Rochester 2G/Two Jet Tech
- Rochester Quadrajet Tech
Articles RSS Feed
Submit An Article