QuadrajetParts.com - Carburetor Parts Superstore
Carburetor Parts & Rebuild Kits for Carter, Holley, Ford, Rochester & Stromberg.
Cable Adapter Swivel
Dimensions:
Shaft Diameter: .298"
Shaft Length: .180"
Cable hole diameter: .090"
Quantity: 1
Come complete with:
Swivel
Screw
Retainer clip
Washer
Connects throttle cable to carburetor throttle arm.
Fits:
Carter W-1, WA-1, WE, WO carburetors
Carter YF, YFA carburetors…see more
- Part Number
- 4246B
Cam Screw- Carter BBD, RBS, BBS 12-28 thread
Fits:
Carter BBS carburetors
Carter BBD carburetors
Carter RBS carburetors
Dimensions:
Thread size: 12-28
Thread length: 1/4"L
Overall length: .800" Screw head diameter: .440"
Quantity: 1…see more
- Part Number
- 4213B
Cam Stud - Press Fit, Holley
Stub diameters: .370" & (.275" press fit)
Over-all length: .600"
Stud material: Steel
Fits:
Holley 1940, 1945, 6145 carburetors
Holley 1946, 6146 carburetors
Holley 1949, 6149 carburetors
Quantity: 1 Cam Stud - Press Fit, Holley…see more
- Part Number
- 3145C
Cam to Choke Lever Link - Rochester Monojet 1977-up GM # 704426
Fits:
Rochester Monojet carburetor, 1977-up GM w/250", 292" engs.
Dimensions:
Rod diameter: 1/8""
Rod over-all length: 3.64"
OEM# 7044261
Quantity: 1…see more
- Part Number
- 3130-M5
Carb Dash Pot Assembly - GM 1965-66, NOS #7032503
Hard to find, VERY Limited Quantity
Fits:
Buick 1966
Chevrolet 1965-66
Oldsmobile 1966
Pontiac 1966
Dimensions:
Overall length : 2.06"
Dash pot piston diameter: .490"
Rod diameter: .095"
OEM Rochester # 7032503
Fits the following carburetor numbers:
7025200, 7025201, 7025220, 7025221, 7026240, 7026242, 7036240, 7036242, 7041304, 7041307, 7041308, 7041309, 7026200, 7026201, 7026202, 7026203, 7026204, 7026205, 7026210, 7026250, 7026254, 7026255, 7026256, 7036200, 7036201, 7036202, 7036203, 7036204, 7036205, 7036210, 7036250, 7036254, 7041310, 7041311, 7041312, 7041313, 7041314, 7041315
Quantity: 1…see more
- Part Number
- 4411E-NOS
Carburetor Bushing Installation Kit - 3/8" throttle shafts, Quad
Also fits Carter Thermo-Quad, Holley, Ford Autolite carburetors , GM TBI's...see more
Complete DIY carburetor bushing installation kit allows you to install bushings on all carburetors with 3/8" throttle shafts.
Works on Rochester Quadrajet secondary throttle shafts.
Kit contains everything you need to correctly do the job yourself. The key to this kit is the specially machined piloted drill that aligns itself with the existing throttle shaft bore. Complete and detailed instructions are included.
Enough supplies included to install bushings on 3 carburetors. Bulk 10-pack bushings are available separately (#4313).
Carburtors with worn throttle shaft bores allow excessive unfiltered air to enter the engine and since the carburetor "doesn't see" this air, it can't compensate for it with the proper amount of fuel. A worn shaft can cause an erratic idle and throttle binding issues.
3/8" Bushing Kit includes:
1 Specially machined piloted drill
1 Drill stop collar
6 Oil impregnated bronze carburetor bushings
Aluminum bushing driver
12 Throttle shaft screws (for the Rochester Quadrajet carburetor)
Complete instructions included
Replacement parts available seperately:
#4313 - 10 pack of throttle shaft bushings
#4212 - 20 pack of Quadrajet throttle shaft screws
Applications:
Rochester Q-Jet carburetors (Secondary throttle shaft)
Also works on the following carburetors (w/exception of throttle screws supplied)
Carter Thermo-Quad carburetors
Holley four barrel carburetors
Ford Autolite carburetors
GM TBI's
All carburetors with 3/8" throttle shafts.
Tools Required:
Electric hand drill
Small hand file
Hammer
Screw driver
Vise
A Note About the Special Machined Drill Bit Included In This Kit:
The drill has been ground down to fit into the throttle shaft outer and inner bore. The actual cutting edge on the drill is approx. 1/2" from the bottom of the drill flutes.…see more
- Part Number
- 4302
Carburetor Bushing Installation Kit, for 5/16" Carburetor Thrott
Kit contains everything you need to correctly do the job yourself!...see more
Complete DIY carburetor bushing installation kit allows you to install bushings on your Rochester Quadrajet primary throttle shafts yourself. This kit works on all carburetors with 5/16" throttle shafts. Kit contains everything you need to correctly do the job yourself. The key to this kit is the specially machined piloted drill that aligns itself with the existing carburetor throttle shaft bore. Complete and detailed instructions are included. Easy to do.
Highly Reccomended:
Top carburetor rebuilders use and recommend this method of bushing installation. Accurate, Complete and FAST.
Feedback received:
My last order, I purchased your 5/16 bushing installation kit. Best tool I ever bought, ever. So quick and accurate I cant believe it. I have used different ways to install the bushings for many years, But this is the best. By the way I am 71 years young and have done a lot of carbs. Your co. is the best.
Thanks, Kenneth T.
Enough supplies included to install bushings on 3 Quadrajet carburetors. Bulk 10-pack bushings are available separately (#4311).
Most Quadrajets have worn primary throttle shaft bores. This excessive clearance allows unfiltered air to enter the engine and since the carburetor "doesn't see" this air, it can't compensate for it with the proper amount of fuel. A worn shaft can cause an erratic idle and light throttle issues.
Quadrajet Carburetor Bushing Kit includes:
1 Specially machined piloted drill
1 Drill stop collar
6 Oil impregnated bronze bushings
Aluminum bushing driver
12 Throttle shaft screws (for Quadrajet, Dualjet carbs only)
Complete instructions included
Replacement parts available separately:
#4311 - 10 pack of throttle shaft bushings
#4212 - 20 pack of Quadrajet throttle shaft screws
Applications:
All Rochester Q-Jet carburetors
Note: Only for use on primary side of Rochester Quadrajet carburetor.
Rochester Dual-Jet
Also works on the following carburetors (w/exception of throttle screws supplied)
Rochester B, BC, BV
Rochester 2G / Two-Jet
Rochester Vara-Jet
Rochester Monojet (Note: Install throttle linkage side bushing first. Other bushing will need to be trimmed if casting narrower than bushing.)
Holley 2245
Carter BBD
For 5/16" throttle shafts
Tools Required:
Electric hand drill
Small hand file
Hammer
Screw driver
Vise
Thread locker
A Note About the Special Machined Drill Bit Included In This Kit:
The drill has been ground down to fit into the throttle shaft outer and inner bore. The actual cutting edge on the drill is approx. 1/2" from the bottom of the drill flutes.…see more
- Part Number
- 4301
Carburetor Choke Cable - Manual 6' Long
Manual Choke Cable
Specs:
Cable length: 6 feet
Body thread diameter-thread: 3/8"-24
Wire thickness: .055"
Knob diameter: 1" Knob color: Dull silver
Quantity: 1 assembly
For use to replace original style choke cable or when converting carburetor to manual choke setup.…see more
- Part Number
- 1290
Carburetor Choke Cable with Generic Installation Kit
Manual Choke Cable With Installation Kit
Specs:
Cable length: 6 feet
Body thread diameter-thread: 3/8"
Wire thickness: .045"
Knob diameter: 1" Knob color: Black
Plastic choke covers:
2 1/4" diameter: (Fits Rochester Quadrajet, Twojet, Monojet, Carter, Holley)
2" diameter: (fits Rochester Varajet)
Quantity: 1 assembly
For use to replace original style choke cable or when converting carburetor to manual choke setup.
Installation kit makes hooking up choke easy.
Instruction sheet included for both carburetors with INTEGRATED CHOKE and carbs with DIVORCED CHOKE.
Generic installation kit can be adapted to most any carburetor.
…see more
- Part Number
- 1291
Carburetor Float Hinge Pin Repair Bracket
Float Hinge Pin Repair Bracket is used when original cast hinge pin studs are broken. Gives new life...see more
Float Hinge Pin Repair Bracket is used when original cast hinge pin studs are broken. Gives new life to otherwise worthless main body castings. Easy to install, no machining required.
Application: Rochester Quadrajet Carburetorsthat use #1402 or #1402B Floats.
Buick 1966-1976
Cadillac 1967-1974
Checker Motors 1967-1968
Chevrolet 1967-1968
Chevrolet Truck 1968, 1973-1976
GMC Truck 1968, 1973-1976
Oldsmobile 1966-1977
Pontiac 1966-1972, 1975-1976
Note: Picture shows intact pins identified by pointer, if both of these pins are damaged, you need to use this repair bracket.…see more
- Part Number
- 1421
Carburetor Idle Mixture Adjusting Tool
Screw driver handle has flexible coiled metal shaft to allow safe and easy idle mixture screw adjustments. The end of flexible shaft has a magnetic socket allowing the bits to be held securely and easily changed for various applications.
QuadrajetParts.com modifies the socket depth of the GM bit to allow this handy tool to also work on additional idle mixture screws that require a deeper socket, other tools on the market will not fit the deeper style mixture screws.
We did this to make this tool more handy, as this one tool can now be used for many styles of Quadrajet and 2G idle mixture screws. The outer diameter of the GM double "D" bit is narrow enough to fit inside the recessed access hole to adjust the mixture screws.
Handle is hollow and has a screw on cap that allows for convenient storage of bits in handle. Four removable bits are included to allow adjustment on various styles of Rochester idle mixture screws:
Tool fits these Quadrajet Carburetor idle mixture screws:
#2001 (Hex)
#2002 (Hex)
#2003 (GM double D style)
#2003A (Hex)
#2003B (Hex)
#2003C (Hex)
#2009C (Hex)
Tool fits these 2G / Two Jet Carburetor idle mixture screws:
#2006C (Hex)
#2006D (Hex)
#2006F (Hex)
#2006G (Hex)…see more
- Part Number
- 4906
Carter (TQ / YF,YFA) Idle Mixture Screws, # 30A-207
Qty: 2 screws...see more
Pair of replacement Carter idle mixture screws.
10-32 pitch thread
1.690" overall length
Qty: 2 Screws
Head Diameter: .325"
Replaces OEM part # 30A-207
Application:
Carter Thermo-Quad carburetor
Carter YF, YFA carburetor…see more
- Part Number
- 2009B
Carter Accelerator Pump- "Double Lip" Cup, 13/16", Alcohol Resis
This 13/16" accelerator pump cup is resistant to the alcohol found in today's gasoline. Easy to change. Great for both stock and performance Carter & Edelbrock AFB/AVS carburetors. Correct your accelerator pump cup problems with this new accelerator pump cup.
Fits:
Carter AFB AVS
Carter Themo-Quad
Edelbrock AFB AVS
Replacement cup for #1008A Pump Plunger Assembly
Replacement cup for #1008B Pump Plunger Assembly
Replacement cup for #1009B Pump Plunger Assembly
Cup OD: 13/16"
Cup ID: 1/2"…see more
- Part Number
- 1014
Carter AFB Step Up Rod Retainer Springs (2 Springs)
Quantity: 2 springs. OEM # 61-585...see more
Retaining spring is used to retain the primary metering rods to the step up pistons. Fits all Carter AFB's.
Quantity: 2 springs.
OEM # 61-585…see more
- Part Number
- 2583
Carter BBD Accelerator Pump Return Spring - (OEM # 61-942)
Fits:
Carter BBD carburetors.
Dimensions:
Spring length: 1.5"
Spring diameter (big end): .575"
Spring diameter (small end): .265
Carter OEM # 61-942
Quantity: 1…see more
- Part Number
- 1061C
Carter BBD Brass Carburetor Float - AMC 1976-88, Chrysler 1959-8
New Brass BBD float is a direct replacement for the original factory float.
Replaces: Carter OEM Float # 21-235
Replaces: AMC OEM Float # 8127325
Replaces: Chrysler OEM Float # 3481274
Application: Carter BBD carburetors.
Fits:
AMC 1976-88
CHRYSLER 1959-84
DESOTO 1960
DODGE 1960-84
DODGE TRUCK 1963-84
JEEP 1977-90
PLYMOUTH 1960-84
Float fits the following carburetors:
2921, 2922, 2983, 3240, 3241, 3472, 3473, 3592, 3682, 3683, 3767, 3768, 3843, 3844, 3847, 3848, 3885, 4011, 4012, 4113, 4114, 4115, 4116, 4123, 4124, 4300, 4301, 4416, 4417, 4418, 4419, 4420, 4421, 4463, 4564, 4605, 4606, 4607, 4608, 4609, 4610, 4700, 4721, 4722, 4723, 4724, 4729, 4749, 4750, 4752, 4819, 4820, 4821, 4822, 4823, 4824, 4825, 4826, 4827, 4828, 4829, 4830, 4895, 4947, 4949, 4957, 4958, 4959, 4960, 4992, 4993, 6031, 6149, 6150, 6151, 6152, 6169, 6198, 6221, 6222, 6223, 6224, 6225, 6228, 6229, 6230, 6301, 6316, 6317, 6328, 6343, 6344, 6363, 6364, 6365, 6367 ,6368, 6409, 6464, 6465, 6466, 6467, 6478, 6491, 6492, 6493, 6536, 6537, 6540, 6585, 6586, 6610, 6611, 6613, 8000, 8001, 8003, 8004, 8005, 8006, 8007, 8008, 8009, 8010, 8013, 8014, 8016, 8018, 8019, 8020, 8022, 8024, 8025, 8026, 8028, 8029, 8062, 8064, 8065, 8066, 8067, 8068, 8069, 8070, 8071, 8072, 8076, 8077, 8079, 8080, 8081, 8082, 8085, 8087, 8090, 8093, 8094, 8096, 8099, 8100, 8101, 8102, 8103, 8104, 8107, 8108, 8109, 8110, 8112, 8113, 8115, 8116, 8117, 8121, 8122, 8123, 8126, 8127, 8128, 8129, 8133, 8134, 8135, 8136, 8137, 8143, 8145, 8146, 8147, 8149, 8151, 8152, 8153, 8154, 8156, 8163, 8166, 8170, 8171, 8172, 8173, 8174, 8175, 8176, 8177, 8180, 8184, 8185, 8186, 8187, 8188, 8195, 8198, 8199, 8200, 8201, 8202, 8205, 8210, 8211, 8214, 8215, 8216, 8217, 8218, 8219, 8221, 8222, 8223, 8224, 8225, 8227, 8229, 8230, 8231, 8232, 8233, 8235, 8237, 8239, 8241, 8242, 8245, 8246, 8247, 8248, 8249, 8250, 8253, 8254, 8255, 8256, 8257, 8261, 8262, 8264, 8265, 8272, 8273, 8274, 8276, 8277, 8278, 8282, 8284, 8286, 8287, 8288, 8290, 8291, 8292, 8294, 8302, 8303, 8306, 8307, 8308, 8309, 8310, 8311, 8312, 8313, 8314, 8315, 8317, 8328, 8329, 8335, 8336, 8337, 8338, 8339, 8340, 8341, 8348, 8349, 8351, 8352, 8354, 8355, 8357, 8358, 8359, 8360, 8362, 8363, 8364, 8366, 8367, 8369, 8371, 8372, 8374, 8381, 8382, 8383, 8384, 8385, 8386, 8387, 8388, 8389, 8393, 8394
Note: Carter carburetor ID tech-
Carter carburetors are identified by a number, followed by an 'S', 'SA', 'SB', 'SC' or 'SD'.
For example, the following carbs would all use the same rebuild kit and float.
4555
4555S
4555SA
4555SB…see more
- Part Number
- 1446A
Carter BBD Brass Carburetor Float - Chrysler 1959-71, Desoto 195
New Brass BBD float is a direct replacement for the original factory float.
Replaces: Carter OEM Float # 21-196
Application: Carter BBD carburetors.
Fits:
CHRYSLER 1959-71
DESOTO 1958-60
DODGE 1959-71
DODGE TRUCK 1967-71
PLYMOUTH 1963-71
Float fits the following carburetors:
2637, 2772, 2793, 2795, 2822, 2870, 2871, 2872, 2905, 2923, 2924, 3132, 3244, 3245, 3386, 3475, 3476, 3684, 3685, 3820, 3849, 3850, 4125, 4126, 4127, 4128, 4296, 4297, 4306, 4307, 4422, 4423, 4578, 4613, 4614, 4725, 4726, 4727, 4728, 4730, 4748, 4774, 4834, 4835, 4894, 4961, 4962, 4964, 6134
Note: Carter carburetor ID tech-
Carter carburetors are identified by a number, followed by an 'S', 'SA', 'SB', 'SC' or 'SD'.
For example, the following carbs would all use the same rebuild kit and float.
4555
4555S
4555SA
4555SB Carter BBD Brass Carburetor Float - Chrysler 1959-71, Desoto 1958-60, Dodge 1959-71, Dodge Truck 1967-71, Plymouth 1963-71…see more
- Part Number
- 1446B
Carter BBD Choke Pull-Off, fits AMC/Jeep/Mopar 1965-85 (#3893C)
Replaces Carter OEM pull-off # 3419587, 3780153, 3780154, 3780514, 3879173, 3879841, 3879842, 4049232, 4049323, 4186242, 4186247
Replaces AMC OEM pull-off # 8127321, 8132550, 8132898, 8133461, 8134308, 8134544
Replaces Chrysler OEM pull-off # 2585418, 2585788, 2933002, 2933103, 2933185
Replaces Jeep OEM pull-off # 8127321, 8132550
New USA made primary choke pull-off. Stock Replacement for Carter BBD 2bbl carburetors. Also know as a Vacuum Break.
Fits: AMC 1976-88 CHRYSLER 1975-84 DODGE 1965-84 DODGE TRUCK 1970-85 JEEP 1977-88 PLYMOUTH 1965-84
Quantity: 1…see more
- Part Number
- 3893C
Carter BBD Choke Pull-Off, fits AMC/Mopar 1981-84 (#3895S)
Replaces Carter OEM pull-off #
Replaces AMC OEM pull-off # 8133461
Replaces Chrysler OEM pull-off # 4267130
New USA made primary choke pull-off. Stock Replacement for Carter BBD 2bbl carburetors. Also know as a Vacuum Break.
Fits: AMC (8) 1981-86
CHRYSLER (8) 1975-84
DODGE (8) 1965-83
DODGE TRUCK (6,8) 1970-85
JEEP (6) 1977-86
PLYMOUTH (8) 1965-83
Quantity: 1…see more
- Part Number
- 3895S
Carter BBD, Oversized Step Up Piston
Carter BBD, Oversized Step Up Piston Oversized repair service step up piston replaces Carter OEM # 160-332.
Quantity: 1
Piston diameter: .377"
Overall length: 1.020"
Note:
Remove plate from old piston, assemble plate on new piston and secure. Drill casting hole with letter "V" drill .377" diameter.…see more
- Part Number
- 3610A
Carter Choke Pull-off Back Spring
Over all length: .800"...see more
Choke Pull-off Back Spring- fits Carter / Holley carburetors.
Over all length: .800"
Spring Diameter: .190"
Quantity: 1 Spring
Application:
Carter Thermo-Quad carburetors
Carter W-1, WA-1, WE, WO carburetors
Carter BBS carburetors
Carter BB carburetors
Carter RBS carburetors
Holley carburetors
Stromberg WW, WWC carburetors…see more
- Part Number
- 1255A
Carter Crimping Tool-
For Carter RBS carburetors
Use with step up rod diaphragm assembly
Dimensions:
Length: 1.38"
Width: .315"
Thickness: .060"
Quantity: 1…see more
- Part Number
- 4911A
Carter Float Pin - .081" x .515"L
Replacement Float Pin for Carter Thermo-Quad carburetors with a .515" pin length....see more
Replacement Float Pin for Carter carburetors with a .515" pin length.
Pin diameter: .081"
Pin length: .515"
Quantity: 1 pin
Application:
Carter Thermo-Quad carburetors
Carter W-1, WA-1, WE, WO carburetors…see more
- Part Number
- 1492A
Carter Float Pin - .093" x 1.00"L
Quantity: 1 pin...see more
Replacement Float Pin for Carter carburetors with a 1" pin length.
Pin diameter: .093"
Pin length: 1.00"
Quantity: 1 pin
Application:
Carter Thermo-Quad carburetors
Carter W-1, WA-1, WE, WO carburetors
Carter WCD, WGD carburetors…see more
- Part Number
- 1492B
Carter Metering Jet .050"
Quantity: 1 Jet
Fits:
Carter AFB carburetors (2 Jets Required*)
Carter AVS carburetors (2 Jets Required*)
Edelbrock Performer (AFB) carburetors (2 Jets Required*)
Edelbrock Thunder Series (AVS) carburetors (2 Jets Required*)
Carter WCFB carburetors (2 Jets Required*)
Carter BBD carburetors (2 Jets Required)
Carter YF, YFA carburetors
Used to tailor primary and secondary enrichment. Jet size is stamped each jet for easy identification. A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your Carter carburetor can pay big dividends at the race track and with increased fuel efficency.
* A total of 4 jets are used. 2 Primary Jets and 2 Secondary Jets. Primary and Secondary jet sizes may be different.
Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more
- Part Number
- 2410-050
Carter Metering Jet .053"
Quantity: 1 Jet
Fits:
Carter AFB carburetors (2 Jets Required*)
Carter AVS carburetors (2 Jets Required*)
Edelbrock Performer (AFB) carburetors (2 Jets Required*)
Edelbrock Thunder Series (AVS) carburetors (2 Jets Required*)
Carter WCFB carburetors (2 Jets Required*)
Carter BBD carburetors (2 Jets Required)
Carter YF, YFA carburetors
Used to tailor primary and secondary enrichment. Jet size is stamped each jet for easy identification. A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your Carter carburetor can pay big dividends at the race track and with increased fuel efficency.
* A total of 4 jets are used. 2 Primary Jets and 2 Secondary Jets. Primary and Secondary jet sizes may be different.
Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more
- Part Number
- 2410-053
Carter Metering Jet .056"
Quantity: 1 Jet
Fits:
Carter AFB carburetors (2 Jets Required*)
Carter AVS carburetors (2 Jets Required*)
Edelbrock Performer (AFB) carburetors (2 Jets Required*)
Edelbrock Thunder Series (AVS) carburetors (2 Jets Required*)
Carter WCFB carburetors (2 Jets Required*)
Carter BBD carburetors (2 Jets Required)
Carter YF, YFA carburetors
Used to tailor primary and secondary enrichment. Jet size is stamped each jet for easy identification. A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your Carter carburetor can pay big dividends at the race track and with increased fuel efficency.
* A total of 4 jets are used. 2 Primary Jets and 2 Secondary Jets. Primary and Secondary jet sizes may be different.
Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more
- Part Number
- 2410-056
Carter Metering Jet .059"
Quantity: 1 Jet
Fits:
Carter AFB carburetors (2 Jets Required*)
Carter AVS carburetors (2 Jets Required*)
Edelbrock Performer (AFB) carburetors (2 Jets Required*)
Edelbrock Thunder Series (AVS) carburetors (2 Jets Required*)
Carter WCFB carburetors (2 Jets Required*)
Carter BBD carburetors (2 Jets Required)
Carter YF, YFA carburetors
Used to tailor primary and secondary enrichment. Jet size is stamped each jet for easy identification. A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your Carter carburetor can pay big dividends at the race track and with increased fuel efficency.
* A total of 4 jets are used. 2 Primary Jets and 2 Secondary Jets. Primary and Secondary jet sizes may be different.
Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more
- Part Number
- 2410-059
Carter Metering Jet .062"
Quantity: 1 Jet
Fits:
Carter AFB carburetors (2 Jets Required*)
Carter AVS carburetors (2 Jets Required*)
Edelbrock Performer (AFB) carburetors (2 Jets Required*)
Edelbrock Thunder Series (AVS) carburetors (2 Jets Required*)
Carter WCFB carburetors (2 Jets Required*)
Carter BBD carburetors (2 Jets Required)
Carter YF, YFA carburetors
Used to tailor primary and secondary enrichment. Jet size is stamped each jet for easy identification. A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your Carter carburetor can pay big dividends at the race track and with increased fuel efficency.
* A total of 4 jets are used. 2 Primary Jets and 2 Secondary Jets. Primary and Secondary jet sizes may be different.
Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more
- Part Number
- 2410-062
Carter Metering Jet .065"
Quantity: 1 Jet
Fits:
Carter AFB carburetors (2 Jets Required*)
Carter AVS carburetors (2 Jets Required*)
Edelbrock Performer (AFB) carburetors (2 Jets Required*)
Edelbrock Thunder Series (AVS) carburetors (2 Jets Required*)
Carter WCFB carburetors (2 Jets Required*)
Carter BBD carburetors (2 Jets Required)
Carter YF, YFA carburetors
Used to tailor primary and secondary enrichment. Jet size is stamped each jet for easy identification. A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your Carter carburetor can pay big dividends at the race track and with increased fuel efficency.
* A total of 4 jets are used. 2 Primary Jets and 2 Secondary Jets. Primary and Secondary jet sizes may be different.
Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more
- Part Number
- 2410-065
Carter Metering Jet .068"
Quantity: 1 Jet
Fits:
Carter AFB carburetors (2 Jets Required*)
Carter AVS carburetors (2 Jets Required*)
Edelbrock Performer (AFB) carburetors (2 Jets Required*)
Edelbrock Thunder Series (AVS) carburetors (2 Jets Required*)
Carter WCFB carburetors (2 Jets Required*)
Carter BBD carburetors (2 Jets Required)
Carter YF, YFA carburetors
Used to tailor primary and secondary enrichment. Jet size is stamped each jet for easy identification. A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your Carter carburetor can pay big dividends at the race track and with increased fuel efficency.
* A total of 4 jets are used. 2 Primary Jets and 2 Secondary Jets. Primary and Secondary jet sizes may be different.
Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more
- Part Number
- 2410-068
Carter Metering Jet .070"
Quantity: 1 Jet
Fits:
Carter AFB carburetors (2 Jets Required*)
Carter AVS carburetors (2 Jets Required*)
Edelbrock Performer (AFB) carburetors (2 Jets Required*)
Edelbrock Thunder Series (AVS) carburetors (2 Jets Required*)
Carter WCFB carburetors (2 Jets Required*)
Carter BBD carburetors (2 Jets Required)
Carter YF, YFA carburetors
Used to tailor primary and secondary enrichment. Jet size is stamped each jet for easy identification. A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your Carter carburetor can pay big dividends at the race track and with increased fuel efficency.
* A total of 4 jets are used. 2 Primary Jets and 2 Secondary Jets. Primary and Secondary jet sizes may be different.
Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more
- Part Number
- 2410-070
Carter Metering Jet .071"
Quantity: 1 Jet
Fits:
Carter AFB carburetors (2 Jets Required*)
Carter AVS carburetors (2 Jets Required*)
Edelbrock Performer (AFB) carburetors (2 Jets Required*)
Edelbrock Thunder Series (AVS) carburetors (2 Jets Required*)
Carter WCFB carburetors (2 Jets Required*)
Carter BBD carburetors (2 Jets Required)
Carter YF, YFA carburetors
Used to tailor primary and secondary enrichment. Jet size is stamped each jet for easy identification. A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your Carter carburetor can pay big dividends at the race track and with increased fuel efficency.
* A total of 4 jets are used. 2 Primary Jets and 2 Secondary Jets. Primary and Secondary jet sizes may be different.
Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more
- Part Number
- 2410-071
Carter Metering Jet .074"
Quantity: 1 Jet
Fits:
Carter AFB carburetors (2 Jets Required*)
Carter AVS carburetors (2 Jets Required*)
Edelbrock Performer (AFB) carburetors (2 Jets Required*)
Edelbrock Thunder Series (AVS) carburetors (2 Jets Required*)
Carter WCFB carburetors (2 Jets Required*)
Carter BBD carburetors (2 Jets Required)
Carter YF, YFA carburetors
Used to tailor primary and secondary enrichment. Jet size is stamped each jet for easy identification. A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your Carter carburetor can pay big dividends at the race track and with increased fuel efficency.
* A total of 4 jets are used. 2 Primary Jets and 2 Secondary Jets. Primary and Secondary jet sizes may be different.
Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more
- Part Number
- 2410-074
Carter Metering Jet .077"
Quantity: 1 Jet
Fits:
Carter AFB carburetors (2 Jets Required*)
Carter AVS carburetors (2 Jets Required*)
Edelbrock Performer (AFB) carburetors (2 Jets Required*)
Edelbrock Thunder Series (AVS) carburetors (2 Jets Required*)
Carter WCFB carburetors (2 Jets Required*)
Carter BBD carburetors (2 Jets Required)
Carter YF, YFA carburetors
Used to tailor primary and secondary enrichment. Jet size is stamped each jet for easy identification. A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your Carter carburetor can pay big dividends at the race track and with increased fuel efficency.
* A total of 4 jets are used. 2 Primary Jets and 2 Secondary Jets. Primary and Secondary jet sizes may be different.
Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more
- Part Number
- 2410-077
Carter Metering Jet .080"
Quantity: 1 Jet
Fits:
Carter AFB carburetors (2 Jets Required*)
Carter AVS carburetors (2 Jets Required*)
Edelbrock Performer (AFB) carburetors (2 Jets Required*)
Edelbrock Thunder Series (AVS) carburetors (2 Jets Required*)
Carter WCFB carburetors (2 Jets Required*)
Carter BBD carburetors (2 Jets Required)
Carter YF, YFA carburetors
Used to tailor primary and secondary enrichment. Jet size is stamped each jet for easy identification. A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your Carter carburetor can pay big dividends at the race track and with increased fuel efficency.
* A total of 4 jets are used. 2 Primary Jets and 2 Secondary Jets. Primary and Secondary jet sizes may be different.
Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more
- Part Number
- 2410-080
Carter Metering Jet .083"
Quantity: 1 Jet
Fits:
Carter AFB carburetors (2 Jets Required*)
Carter AVS carburetors (2 Jets Required*)
Edelbrock Performer (AFB) carburetors (2 Jets Required*)
Edelbrock Thunder Series (AVS) carburetors (2 Jets Required*)
Carter WCFB carburetors (2 Jets Required*)
Carter BBD carburetors (2 Jets Required)
Carter YF, YFA carburetors
Used to tailor primary and secondary enrichment. Jet size is stamped each jet for easy identification. A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your Carter carburetor can pay big dividends at the race track and with increased fuel efficency.
* A total of 4 jets are used. 2 Primary Jets and 2 Secondary Jets. Primary and Secondary jet sizes may be different.
Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more
- Part Number
- 2410-083
Carter Metering Jet .086"
Quantity: 1 Jet
Fits:
Carter AFB carburetors (2 Jets Required*)
Carter AVS carburetors (2 Jets Required*)
Edelbrock Performer (AFB) carburetors (2 Jets Required*)
Edelbrock Thunder Series (AVS) carburetors (2 Jets Required*)
Carter WCFB carburetors (2 Jets Required*)
Carter BBD carburetors (2 Jets Required)
Carter YF, YFA carburetors
Used to tailor primary and secondary enrichment. Jet size is stamped each jet for easy identification. A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your Carter carburetor can pay big dividends at the race track and with increased fuel efficency.
* A total of 4 jets are used. 2 Primary Jets and 2 Secondary Jets. Primary and Secondary jet sizes may be different.
Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more
- Part Number
- 2410-086
Carter Metering Jet .089"
Quantity: 1 Jet
Fits:
Carter AFB carburetors (2 Jets Required*)
Carter AVS carburetors (2 Jets Required*)
Edelbrock Performer (AFB) carburetors (2 Jets Required*)
Edelbrock Thunder Series (AVS) carburetors (2 Jets Required*)
Carter WCFB carburetors (2 Jets Required*)
Carter BBD carburetors (2 Jets Required)
Carter YF, YFA carburetors
Used to tailor primary and secondary enrichment. Jet size is stamped each jet for easy identification. A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your Carter carburetor can pay big dividends at the race track and with increased fuel efficency.
* A total of 4 jets are used. 2 Primary Jets and 2 Secondary Jets. Primary and Secondary jet sizes may be different.
Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more
- Part Number
- 2410-089
Carter Metering Jet .092"
Quantity: 1 Jet
Fits:
Carter AFB carburetors (2 Jets Required*)
Carter AVS carburetors (2 Jets Required*)
Edelbrock Performer (AFB) carburetors (2 Jets Required*)
Edelbrock Thunder Series (AVS) carburetors (2 Jets Required*)
Carter WCFB carburetors (2 Jets Required*)
Carter BBD carburetors (2 Jets Required)
Carter YF, YFA carburetors
Used to tailor primary and secondary enrichment. Jet size is stamped each jet for easy identification. A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your Carter carburetor can pay big dividends at the race track and with increased fuel efficency.
* A total of 4 jets are used. 2 Primary Jets and 2 Secondary Jets. Primary and Secondary jet sizes may be different.
Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more
- Part Number
- 2410-092
- Carburetor Tech Info (6)
- Mercury Marine Mercarb Carbureto
- Rochester 2G/Two Jet Tech (2)
- Rochester Quadrajet Tech (23)