JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Result Pages:
ECM Connector to Bowl Cover Gaskets (5-Pack)

Electronic Control Module (ECM) Connector to Bowl Cover Gaskets. Qty: 5 rubber gaskets
Thickness: .125"…see more

Part Number
1736
ECM Connector to Bowl Cover Gaskets. (5-Pack)


Rochester products part # 17062508...see more

Electronic Control Module (ECM) Connector to Bowl Cover Gaskets. Rochester products part # 17062508 Qty: 5 rubber gaskets
Thickness: .060"…see more

Part Number
1734
ECM Connector to Bowl Cover Gaskets. (5-Pack)


Rochester products part # 17063597...see more

Electronic Control Module (ECM) Connector to Bowl Cover Gaskets. Rochester products part # 17063597 Qty: 5 rubber gaskets
Thickness: .125"…see more

Part Number
1735
Edelbrock Micro Fuel Pump (38 GHP)

Edelbrock Electronic Micro Fuel Pumps
Part #17301 - 12 volt. (38 GPH @ 4-7 PSI) gasoline applications only.
Supports up to 410 HP. This small, lightweight gravity feed fuel pump is intended to replace mechanical fuel pumps on carbureted applications. NOTE: The fuel pump is directional as marked on the mounting bracket. Pump comes with 5/16" fuel line fittings.
Mounting hardware included.
Installation Instructions are included.…see more

Part Number
17301
EFE Carburetor Heater - GM 1984 w/ 2.0L 1bbl #14072739

Fits: GM 1984 1.6L All Models
Cadillac 1984 1.6L All Models Buick 1984 1.6L All Models Chevrolet 1984 1.6L All Models Oldsmobile 1984 1.6L All Models Pontiac 1984 1.6L All Models
May fit other applications too.   Replaces GM/AC Delco OEM Heater #: 14072729, 14072740 Quantity: 1 Specifications:
3 bolt intake manifold pattern
Aluminum/spacer thickness: .285"
Single wire connector Very limited quantities available.
The EFE (Early Fuel Evaporation) heaters purpose is to aid with vaporization of fuel in cold conditions, reduces emissions. A malfunctioning EFE heater will cause poor driveability and reduced fuel economy.
The EFE heater is located between carburetor and intake manifold.…see more

Part Number
5311
EFE Carburetor Heater - Rochester Dualjet (Black)

Fits:
GM GM 1984-85 3.0L All Models w/ Dualjet carburetor
GM 1982-87 3.8L All Models w/ Dualjet carburetor Replaces AC Delco OEM Heater #: 24501661, 25526373
Quantity: 1 Specifications:
Bolt pattern: 4.25" x 3.62"
Gasket/spacer thickness: .260"
Black wire connector Very limited quantities available.
The EFE (Early Fuel Evaporation) heaters purpose is to aid with vaporization of fuel in cold conditions, reduce emissions. A malfunctioning EFE heater will cause poor driveability and reduced fuel economy.
The EFE heater is located between carburetor and intake manifold.…see more

Part Number
5302
EFE Carburetor Heater - Rochester Dualjet (Gray)

Fits:
GM 1982-87 3.8L All Models w/ Dualjet carburetor
GM 1984-85 3.0L All Models w/ Dualjet carburetor
May fit other applications. Replaces AC Delco OEM Heater #: 24501659, 24501660, 25515853, 25516908
Quantity: 1 Specifications:
Bolt pattern: 4.25" x 3.62"
Gasket/spacer thickness: .260"
Grey wire connector Very limited quantities available.
The EFE (Early Fuel Evaporation) heaters purpose is to aid with vaporization of fuel in cold conditions, reduce emissions. A malfunctioning EFE heater will cause poor driveability and reduced fuel economy.
The EFE heater is located between carburetor and intake manifold.…see more

Part Number
5301
EFE Carburetor Heater - Rochester Varajet

Fits:
GM GM 1982 1.8L All Models w/ Varajet carburetor
Chevrolet truck 1983-84
GMC truck 1983-84
May fit other applications too. Replaces AC Delco OEM Heater #: 14018761
Quantity: 1 Specifications:
Carburetor bolt pattern: 2.1" x 2.9" x 4.85"
3 bolt intake manifold pattern
Gasket/spacer thickness: 1"
Black single wire connector Very limited quantities available.
The EFE (Early Fuel Evaporation) heaters purpose is to aid with vaporization of fuel in cold conditions, reduce emissions. A malfunctioning EFE heater will cause poor driveability and reduced fuel economy.
The EFE heater is located between carburetor and intake manifold.…see more

Part Number
5303
EFE Carburetor Heater Gasket - Rochester Quadrajet

Fits: NOS Delco # 25518521
Made in Canada
Quantity: 1 Specifications:
Overall depth including heater element: 1.14"
Gasket/spacer thickness: .270" Rare, Very limited quantities available.
The EFE (Early Fuel Evaporation) heaters purpose is to aid with vaporization of fuel in cold conditions, reduces emissions. A malfunctioning EFE heater will cause poor driveability and reduced fuel economy.
The EFE heater is located between carburetor and intake manifold.…see more

Part Number
5309
Electric Choke Conversion Kit- For Buick 1968-74 Quadrajet Carbu

  NEW Breakthrough Design - Patent Pending Electric choke kit converts all 1968 thru 1974 Buick carburetors regardless of type of engine. Works fine on aftermarket intake manifolds. This conversion choke mounts solely on the carburetor, so it makes no difference what engine the Buick carburetor is mounted on.
Complete instructions included. Kit contains:
Electric choke coil, flat terminal (1)
Locating bracket (1)
3” outer ring (1)
Hex standoffs (2)
#6-32x.25 php screw (3)
#6-32x.5 php screw (2)
#8-32x.188 php screw (3)
#8-32x.5 set screw (1)
Plastic Cap (1)
Detailed instructions Tools required:
Philips screwdriver
¼” socket and driver
Needle nose locking pliers
Electric hand drill
Drill bits 11/64”, 9/64”, 3/32”, 1/16”
#8-32 tap
Loctite threadlocker Efficient choke operation affects fuel economy during the first 5 miles of driving after starting the engine. Applications:
All Makes and models with 1968-74 Buick Rochester Quadrajet Carburetor.
All factory and after market intake manifolds with 1968-74 Buick Rochester Quadrajet Carburetor.
For example: A non-Buick engine using a 68-74 Buick divorced choke style carburetor. Note:
This choke kit is designed for use with ONLY 1968, 1969, 1970, 1971, 1972, 1973 and 1974 Buick Quadrajet carburetors. Electronic Choke Conversion Kit is not returnable if original packaging is opened.…see more

Part Number
1223
Electric Choke Conversion Kit- For Cadilllac 1969-74 Quadrajet C

  NEW Breakthrough Design - Patent Pending Electric choke kit converts all 1969 thru 1974 Cadillac carburetors regardless of type of engine. Works fine on aftermarket intake manifolds. This conversion choke mounts solely on the carburetor, so it makes no difference what engine the Cadillac carburetor is mounted on.
Complete instructions included. Kit contains:
Electric choke coil, flat terminal (1)
Locating bracket (1)
3” outer ring (1)
Hex standoffs (2)
#6-32x.25 php screw (3)
#6-32x.5 php screw (2)
#8-32x.188 php screw (3)
#8-32x.5 set screw (1)
Plastic Cap (1)
Detailed instructions Tools required:
Philips screwdriver
¼” socket and driver
Needle nose locking pliers
Electric hand drill
Drill bits 11/64”, 9/64”, 3/32”, 1/16”
#8-32 tap
Loctite threadlocker Efficient choke operation affects fuel economy during the first 5 miles of driving after starting the engine. Applications:
All Makes and models with 1969-74 Cadillac Rochester Quadrajet Carburetor.
All factory and after market intake manifolds with 1969-74 Cadillac Rochester Quadrajet Carburetor.
For example: A non-Cadillac engine using a 69-74 Cadillac divorced choke style carburetor. Note:
This choke kit is designed for use with ONLY 1969, 1970, 1971, 1972, 1973 and 1974 Cadillac Quadrajet carburetors. Electronic Choke Conversion Kit is not returnable if original packaging is opened.…see more

Part Number
1223B
Electric Choke Conversion Kit- For Pontiac 1968-72 Quadrajet Car

  NEW Breakthrough Design - Patent Pending Electric choke kit converts all 1968 thru 1972 Pontiac carburetors regardless of type of engine. Works fine on aftermarket intake manifolds. This conversion choke mounts solely on the carburetor, so it makes no difference what engine the Pontiac carburetor is mounted on.
Complete instructions included. Kit contains:
Electric choke coil, flat terminal (1)
Locating bracket (1)
3” outer ring (1)
Hex standoffs (3)
#6-32x.25 php screw (3)
#6-32x.5 php screw (2)
#6-32x.188 flathead screw (1)
#8-32x.188 php screw (2)
#8-32x.5 set screw (1)
Plastic Cap (1)
Detailed instructions Tools required:
Philips screwdriver
¼” wrench, socket and driver
Needle nose locking pliers
Electric hand drill
Drill bits 11/64”, 9/64”, 7/64", 3/32”, 1/16”
Taps #8-32, #6-32
5/64" Allen key
Loctite threadlocker Efficient choke operation affects fuel economy during the first 5 miles of driving after starting the engine. Applications:
All Makes and models with 1968-72 Pontiac Rochester Quadrajet Carburetor.
All factory and after market intake manifolds with 1968-72 Pontiac Rochester Quadrajet Carburetor.
For example: A non-Pontiac engine using a 68-72 Pontiac divorced choke style carburetor. Note:
This choke kit is designed for use with ONLY 1968, 1969, 1970, 1971 and 1972 Pontiac Quadrajet carburetors. Electric Choke Conversion Kit is not returnable if original packaging is opened.…see more

Part Number
1223A
Electric Choke Thermostat

Originally fit:
FORD (8) 1980 (Ford 2bbl)
LINCOLN (8) 1980 (Ford 2bbl)
MERCURY (8) 1980 (Ford 2bbl) FORD (6) 1978-80 (Carter 1bbl)
FORD TRUCK (6) 1978-86 (Carter 1bbl)
MERCURY (6) 1978-80 (Carter 1bbl) Stock replacement assembly with OEM style terminal. Note:
When element is heated the bi-metal spring winds up. Fits:
Carter YF, YFA carburetors
Ford/Motorcraft 2700 VV carburetors
Ford/Motorcraft 7200 VV carburetors Thermostat housing diameter: 2.175" (2 3/16") Quantity: 1…see more

Part Number
1256B
Electric Choke Thermostat - Carter BBD

Originally fit:
AMC (6) 258 cid - 1980
JEEP (6) 258 cid -1980 AMC/JEEP OEM Choke Numbers:
8132544, 8132548 Carter OEM Choke Numbers:
170-1578, 170-1596 Stock replacement assembly with common spade terminal. Fits:
Carter BBD carburetors
Ford/Motorcraft carburetors
Holley carburetors Note:
When 12v power is supplied to the choke and the element heats up, the bi-metal coil winds up. When the coil cools down, the coil un-winds.
Bi-metal coil can be carefully removed and flipped over to reverse coil rotation. Thermostat housing diameter: 2.175" (2 3/16")
Quantity: 1…see more

Part Number
1211J
Electric Choke Thermostat - Ford 2 & 4 BBL

Fits:
Ford/Motorcraft 2100, 2150 carburetors
Ford/Motorcraft 4100 carburetors Originally used on: FORD (6, 8) 1973-83 FORD TRUCK (8) 1973-83 LINCOLN (8) 1973-80 MERCURY (6, 8) 1973-83 Carter OEM Number:170-1294, 170-1745, 170-1747, 170-1748, 170-1750, 170-1751, 170-1752, 170-1753, 170-1754, 170-1755, 170-1756, 170-1761, 170-1826, 170-1827, 170-1828, 170-1854
Ford OEM Number:D3AZ-9848-N, D4AZ-9848-A, D4TZ-9848-A, D5AZ-9848-A, D5AZ-9848-C, D5OZ-9848-A, D5VZ-9848-C, D7AZ-9848-A, D7AZ-9848-D, D7DZ-9848-A, D7FZ-9848-E, D7PZ-9848-D, D7TZ-9848-A, D84Z-9848-A, D9UZ-9848-A, E0BZ-9848-B, E0DZ-9848-A, E0TZ-9848-A, E2AZ-9848-B, E2BZ-9848-D, E2BZ-9848-G, E2TZ-9848-D High quality stock replacement assembly. Thermostat diameter: 2.16" (2-3/16")
Quantity: 1 When 12v power is supplied to the choke and the element heats up, the bi-metal coil un-winds. When the coil cools down, the coil tightens up. Note: Bi-metal coil can be carefully removed and flipped over to reverse coil rotation. Note: Some early carburetor choke housings have a center stud / post that sticks out too far, This choke thermostat will not work unless stud/post length is reduced.…see more

Part Number
1211K
Electric Choke Thermostat - Ford 2 & 4 BBL

Fits:
Ford/Motorcraft 2100, 2150 carburetors
Ford/Motorcraft 4100 carburetors Originally used on: FORD (6, 8) 1973-83 FORD TRUCK (8) 1973-83 LINCOLN (8) 1973-80 MERCURY (6, 8) 1973-83 Carter OEM Number:
Ford OEM Number: D9AZ-9848D, E0VY-9848A, E1TZ-9848-B, CM3163 Thermostat diameter: 2.16" (2-3/16")
Quantity: 1 When 12v power is supplied to the choke and the element heats up, the bi-metal coil un-winds. When the coil cools down, the coil tightens up. Note: Bi-metal coil can NOT be easily removed and flipped over to reverse coil rotation. (If reverse rotation needed, see part # 1211K) Note: Some early carburetor choke housings have a center stud / post that sticks out too far, This choke thermostat will not work unless stud/post length is reduced.…see more

Part Number
1211W
Electric Choke Thermostat - Ford 2BBL

Originally fit:
FORD (6, 8) 1982-85
FORD TRUCK (6, 8) 1982-86
LINCOLN (6) 1983
MERCURY (6, 8) 1982-84 Carter OEM Choke Numbers:
170-1844, 170-1849, 170-1850, 170-1851, 170-1852 Ford/Motorcraft OEM Choke Numbers:
E2DZ-9848-B, E2SZ-9848-B, E2TZ-9848-A, E3AZ-9848-D, E3SZ-9848-B, E3TZ-9848-A, E3TZ-9848-B, E3TZ-9848-C, E3TZ-9848-D, E3TZ-9848-E, E3TZ-9848-F, E3TZ-9848-G, E3UZ-9848-A, E4TZ-9848-A Stock replacement assembly with OEM style terminal. Fits:
Ford/Motorcraft 2100 carburetors
Ford/Motorcraft 2150 carburetors Note:
When 12v power is supplied to the choke and the element heats up, the bi-metal coil un-winds. When the coil cools down, the coil tightens up.
Bi-metal coil can be carefully removed and flipped over to reverse coil rotation. Thermostat housing diameter: 2.175" (2 3/16")
Quantity: 1…see more

Part Number
1211H
Electric Choke Thermostat - Holley

High quality stock replacement assembly with OEM style "L" shaped terminal on end of pigtail connector. Quantity: 1
Thermostat diameter: 2" Note:
When heated the bi-metal spring unwinds.…see more

Part Number
1211M
Electric Choke Thermostat - Holley 4150

Fits:
Holley 4 bbl carburetors
Holley 4150 style carburetors Originally used on:
FORD (8) 1983-85
FORD TRUCK (8) 1983-86
MERCURY (8) 1984-85 Carter OEM Number:170-1843
Ford OEM Number:E3PZ-9848-N, E4PZ-9848-F, E4PZ-9848-G, E5PZ-9848-A, E5PZ-9848-B, E6PZ-9848-B High quality stock replacement assembly. Thermostat diameter: 2.16" (2-3/16") When 12v power is supplied to the choke and the element heats up, the bi-metal coil un-winds. When the coil cools down, the coil tightens up. Note: Bi-metal coil can be carefully removed and flipped over to reverse coil rotation.…see more

Part Number
1211G
Electric Choke Thermostat - Holley 4180

Originally fit:
FORD TRUCK (8) 1983-85 All Models 7.5L(L) 460" (Holley 4 bbl) Ford OEM Choke Numbers:
E3PZ-9848-E
Holley OEM Choke Numbers:
47R-692-ASK Stock replacement assembly with spade terminal. Fits:
Carter carburetors
Ford/Motorcraft carburetors
Holley 4180 carburetors Note:
When 12v power is supplied to the choke and the element heats up, the bi-metal coil un-winds. When the coil cools down, the coil winds-up.
Bi-metal coil can be carefully removed and flipped over to reverse coil rotation. Thermostat housing diameter: 2.175" (2 3/16")
Quantity: 1…see more

Part Number
1211L
Electric Choke Thermostat - Rochester Varajet

High quality stock replacement assembly with OEM style "L" shaped terminal. When used with Pigtail wire connector 1331 or OEM connector, wire connector will lock positively on terminal. Fits:
Rochester Varajet carburetors. Thermostat diameter: 2 inches When heated, the bi-metal spring winds up.
Quantity: 1 Note:
Choke coil spring can be carefully removed and flipped over and re-installed. This will allow coil to rotate in opposite direction if needed. Note:
Clocking position (location of end of bi-metal coil spring) may be different than photo. Note: Pigtail connector # 1331 or OEM connector is required.…see more

Part Number
1211C
Electric Choke Thermostat - Rochester Varajet ("Flat" Terminal)

Replacement assembly with "Flat" shaped terminal. The flat terminal allows use of standard spade type electrical connection. Fits:
Rochester Varajet carburetors. When 12v power is supplied to the choke and the element heats up, the bi-metal coil tightens up. When the coil cools down, the coil un-winds. Thermostat diameter: 2"
Quantity: 1 Note:
Choke coil spring can be carefully removed and flipped over and re-installed. This will allow coil to rotate in opposite direction if needed. Note:
Clocking position (location of end of bi-metal coil spring) may be different than photo. Note: Pigtail connector # 1331 or OEM connector can be used for a factory look, but the connectors locking/unlocking mechanism will be lost.…see more

Part Number
1211D
Electric Choke Thermostat (<--LEAN)

Fits:
Carter carburetors
Holley carburetors High quality stock replacement assembly. Thermostat diameter: 2.16" (2-3/16") When 12v power is supplied to the choke and the element heats up, the bi-metal coil un-winds. When the coil cools down, the coil tightens up. Note: Bi-metal coil can be carefully removed and flipped over to reverse coil rotation.…see more

Part Number
1211F
Electric Choke Thermostat Holley, Carter (--> LEAN)


OD: 2.160", Depth of...see more

Fits:
Carter AFB carburetors
Carter WCFB carburetors (May require bi-metal coil to be flipped over)
Carter YF, YFA carburetors
Edelbrock AFB carburetors
Holley 4000 carburetors (Bi-metal coil end may need to be bent into a circle to be able to push and pull the choke lever)
Holley carburetors (Universal Choke)
MERCURY MARINE carburetors (Mercury Choke OEM # 809066) High quality stock replacement assembly. Thermostat diameter: 2.16" (2-3/16")
Depth of case: .925" When 12v power is supplied to the choke and the element heats up, the bi-metal coil winds-up. When the coil cools down, the coil un-winds. Note: Bi-metal coil can be carefully removed and flipped over to reverse coil rotation.…see more

Part Number
1254D
Electric Choke Thermostat Kit - Rochester


Includes 3 retainers and 3 screws....see more

High quality stock replacement assembly with OEM style "L" shaped terminal. When used with Pigtail wire connector #1331 or OEM connector, wire connector will lock positively on terminal. Electric Choke Thermostat fits Rochester Quadrajet, Twojet and Dualjet carburetors. Includes:
1 Electric choke thermostat
3 retainers
3 screws Note:
Screws included with this kit are 4214, OEM sized screws. If you are replacing a thermostat that is retained with pop rivets, you will need to purchase over sized/self tapping screws 4215 or replacement pop rivets 4216. Bi-metal coil design may differ from photo, but will function the same. When heated, bi-metal coil will wind-up. (rotating counter clockwise when viewed from backside of thermostat) Thermostat diameter: 2-1/4" Hot-Air Choke to Electric Choke Conversion:
This electric choke thermostat can be used to replace original hot-air thermostat, just run 12volts to the thermostat and remove original hot-air choke thermostat gasket. Note: Pigtail connector #1331 or OEM connector is required.…see more

Part Number
1211
Electric Choke Thermostat Kit - Rochester ("Flat" Terminal)


Includes 3 retainers and 3 screws....see more

Replacement assembly with "Flat" shaped terminal. The flat terminal allows use of standard spade type electrical connection. Electric Choke Thermostat fits Rochester Quadrajet, Twojet and Dualjet carburetors. When 12v power is supplied to the choke and the element heats up, the bi-metal coil tightens up. When the coil cools down, the coil un-winds. Includes 3 retainers and 3 screws.
Note:
Screws included with this kit are 4215, over sized, self tapping screws. Hot-Air Choke to Electric Choke Conversion:
This electric choke thermostat can be used to replace original hot-air thermostat, just run a 12 volt wire to a "keyed" power source and remove original hot-air choke thermostat gasket. A "keyed power source only receives power when the ignition key is turned on. Thermostat diameter: 2-1/4" Note: Pigtail connector # 1331 or OEM connector can be used for a factory look, but the connectors locking/unlocking mechanism will be lost.…see more

Part Number
1211A
Electronic Choke Conversion Kit- AMC, Ford, Jeep 1960-79 w/ 2 &

Solid State Electronic Automatic Choke Kit- Easy to install electronic choke kit converts hot-air choke carburetors to a solid state electronic choke. Contains everything you need: Electric choke thermostat housing assembly, heat sensor, wiring and detailed instructions. Efficient choke operation affects fuel economy during the first 5 miles of driving after starting the engine. Note:
Choke bi-metal spring Unwind thermostat element heats up.
Thermostat diameter 2.15" Applications:
American Motors (AMC) 1970-79 304, 360 with Ford Motorcraft 2bbl Carburetor.
Ford 1965-79 260, 289, 302, 351, 351M, 351W, 390, 400, 428, 429 with Ford Motorcraft 2bbl Carburetor.
Ford 1975-79 171, 2.8L with Ford Motorcraft 2bbl Carburetor.
Ford 1966-69 428 Police with Ford Motorcraft 4bbl Carburetor.
Ford 1966 289, 352 with Ford Motorcraft 4bbl Carburetor.
Ford 1965 289, 352, 390 with Ford Motorcraft 4bbl Carburetor.
Ford Truck 1970-72 302, 351, 351M, 351W, 390, 400 with Ford Motorcraft 2bbl Carburetor.
Ford Truck 1974 302, 351, 351M, 351W, 390, 400 with Ford Motorcraft 2bbl Carburetor.
Ford Truck 1977-79 302, 351, 351M, 351W, 390, 400 with Ford Motorcraft 2bbl Carburetor.
Jeep 1973-77 304, 360 with Ford Motorcraft 2bbl Carburetor.
Lincoln 1977-79 400 with Ford Motorcraft 2bbl Carburetor.
Mercury 1960-79 with Ford Motorcraft 2 & 4bbl Carburetor. Electronic Choke Conversion Kit is not returnable if original packaging is opened.…see more

Part Number
1221M
Electronic Choke Conversion Kit- BB Chevy 396-454


Easy to install electronic choke kit converts divorced choke carburetors to a solid state electronic choke. Contains everything you need: Electric choke thermostat...see more

Solid State Electronic Automatic Choke Kit-
BB Chevy 396-454 Easy to install electronic choke kit converts divorced choke carburetors to a solid state electronic choke. Contains everything you need: Electric choke thermostat housing assembly and mounting bracket, choke rod, heat sensor, wiring and detailed instructions. Efficient choke operation affects fuel economy during the first 5 miles of driving after starting the engine. Note: Choke rod moves up when thermostat element heats up. Applications:
Chevrolet 1970-1971, 396-454 with Rochester Quadrajet
Chevrolet 1972-1973-1974, 454 with Rochester Quadrajet
Chevrolet Truck 1970, 396 with Rochester Quadrajet
Chevrolet Truck 1971-1972, 402 with Rochester Quadrajet
Chevrolet Truck 1973-1974-1975, 454 with Rochester Quadrajet
GMC Truck 1973-1975-1976, 454 with Rochester Quadrajet
May fit other applications also. Note:
This choke kit is designed for use with original intake manifolds from applications listed above. It may or may not fit on aftermarket or different year/application intake manifolds. Aftermarket intakes may require the choke thermostat bracket and/or intake manifold to be modified and altered in order to mount electric choke to intake manifold.  Identification Help:  This conversion kit is designed for intake manifolds that originally were equipted with a divorced choke style with mounting points similar to our part #1201. Electronic Choke Conversion Kit is not returnable if original packaging is opened. Choke Measurements:
Distance from center of mounting screw hole to locating tab: .950"
Mounting flange to top of choke assembly: 2.4" high
Width of unit: approx. 2.9"
Width of unit from center of mounting screw: 2.2" & 0.7"
Depth of unit (mounting screw to electrical connectors): approx. 2.5"
Diameter of electric choke plastic housing: 2 1/8"
Length of choke rod: 1.2"
Height of choke rod at upper limit: approx 3.9" (from flange)
Height of choke rod at lower limit: approx 2.4" (from flange)
Flange offset: .330" raised above flange mounting point…see more

Part Number
1221
Electronic Choke Conversion Kit- Buick 455 1972-74

Solid State Electronic Automatic Choke Kit- Easy to install electronic choke kit converts remote/divorced choke carburetors to a solid state electronic choke. Contains everything you need: Electric choke thermostat housing assembly and mounting bracket, choke rod, heat sensor, wiring and detailed instructions. Efficient choke operation affects fuel economy during the first 5 miles of driving after starting the engine. Note:
Choke rod moves down when thermostat element heats up.
Mounting hole distance: 3.1" (center to center) Applications:
All Buick 1972-74, 455 engine with Rochester Quadrajet Note:
This choke kit is designed for use with original intake manifolds from applications listed above. It may or may not fit on aftermarket or different year/application intake manifolds. Aftermarket intakes may require the choke thermostat bracket and/or intake manifold to be modified and altered in order to mount electric choke to intake manifold. Electronic Choke Conversion Kit is not returnable if original packaging is opened.…see more

Part Number
1221B
Electronic Choke Conversion Kit- Cadillac 1968-69

Solid State Electronic Automatic Choke Kit- Easy to install electronic choke kit converts remote/divorced choke carburetors to a solid state electronic choke. Contains everything you need: Electric choke thermostat housing assembly and mounting bracket, choke rod, heat sensor, wiring and detailed instructions. Efficient choke operation affects fuel economy during the first 5 miles of driving after starting the engine. Note:
Choke rod moves down when thermostat element heats up.
Mounting hole distance: 3.0" (center to center) Applications:
All Cadillac 1968-69, with Rochester Quadrajet Carburetor. Note:
This choke kit is designed for use with original intake manifolds from applications listed above. It may or may not fit on aftermarket or different year/application intake manifolds. Aftermarket intakes may require the choke thermostat bracket and/or intake manifold to be modified and altered in order to mount electric choke to intake manifold. Electronic Choke Conversion Kit is not returnable if original packaging is opened.…see more

Part Number
1221C
Electronic Choke Conversion Kit- Chevrolet 1965-70 w/ 4bbl Carbu

Solid State Electronic Automatic Choke Kit- Easy to install electronic choke kit converts remote/divorced choke carburetors to a solid state electronic choke. Contains everything you need: Electric choke thermostat housing assembly and mounting bracket, choke rod, heat sensor, wiring and detailed instructions. Efficient choke operation affects fuel economy during the first 5 miles of driving after starting the engine. Note:
Choke rod moves down when thermostat element heats up. Applications:
Chevrolet 1965-70 302, 327, 350, 396, 427 with Rochester Quadrajet 4bbl Carburetor.
Chevrolet 1965-70 302, 327, 350, 396, 427 with Holley 4bbl Carburetor.      Identification Help:  This conversion kit is designed for intake manifolds that originally were equipted with a divorced choke style with mounting points similar to our part #1211S. Note: This choke conversion kit(#1221L) is very similar to choke conversion kit #1221P, with exception to the direction the choke rod moves.
This choke kit is designed for use with original intake manifolds from applications listed above. It may or may not fit on aftermarket or different year/application intake manifolds. Aftermarket intakes may require the choke thermostat bracket and/or intake manifold to be modified and altered in order to mount electric choke to intake manifold. Electronic Choke Conversion Kit is not returnable if original packaging is opened.…see more

Part Number
1221L
Electronic Choke Conversion Kit- Chevrolet 1966-71 & 1978 w/ 4bb

Solid State Electronic Automatic Choke Kit- Easy to install electronic choke kit converts remote/divorced choke carburetors to a solid state electronic choke. Contains everything you need: Electric choke thermostat housing assembly and mounting bracket, choke rod, heat sensor, wiring and detailed instructions. Efficient choke operation affects fuel economy during the first 5 miles of driving after starting the engine. Note:
Choke rod moves up when thermostat element heats up. Applications:
Chevrolet 1971 350 with Rochester Quadrajet 4bbl Carburetor.
Chevrolet 1970 350 with Rochester Quadrajet 4bbl Carburetor.
Chevrolet 1969 350 with Rochester Quadrajet 4bbl Carburetor.
Chevrolet 1969 396, 427 with Rochester Quadrajet 4bbl Carburetor. **
Chevrolet 1968 327, 350 with Rochester Quadrajet 4bbl Carburetor.
Chevrolet 1968 396, 427 with Rochester Quadrajet 4bbl Carburetor. **
Chevrolet 1967 327, 350 with Rochester Quadrajet 4bbl Carburetor.
Chevrolet 1966 327 with Rochester Quadrajet 4bbl Carburetor.
Chevrolet Truck 1978 400 with Rochester Quadrajet 4bbl Carburetor.
** Control rod must be changed before installation for Big Block applications. Note:
This Choke conversion kit (#1221P) is similar to choke conversion kit #1221L with exception to the direction the choke rod moves. This choke kit is designed for use with original intake manifolds from applications listed above. It may or may not fit on aftermarket or different year/application intake manifolds. Aftermarket intakes may require the choke thermostat bracket and/or intake manifold to be modified and altered in order to mount electric choke to intake manifold.  Identification Help:  This conversion kit is designed for intake manifolds that originally were equipted with a divorced choke style with mounting points similar to our part #1211S. Electronic Choke Conversion Kit is not returnable if original packaging is opened.…see more

Part Number
1221P
Electronic Choke Conversion Kit- Chevrolet Vega 1971-74

Solid State Electronic Automatic Choke Kit- Easy to install electronic choke kit converts remote/divorced choke carburetors to a solid state electronic choke. Contains everything you need: Electric choke thermostat housing assembly and mounting bracket, choke rod, heat sensor, wiring and detailed instructions. Efficient choke operation affects fuel economy during the first 5 miles of driving after starting the engine. Note:
Choke rod moves down when thermostat element heats up.
Mounting hole distance: 2.05" (center to tab) Applications:
Chevrolet Vega 1971-74, 4 cyl. with Rochester Mono-jet 1bbl Carburetor.
Chevrolet Vega 1971-74, 4 cyl. with Rochester Two-jet 2bbl Carburetor. Note:
This choke kit is designed for use with original intake manifolds from applications listed above. It may or may not fit on aftermarket or different year/application intake manifolds. Aftermarket intakes may require the choke thermostat bracket and/or intake manifold to be modified and altered in order to mount electric choke to intake manifold. Electronic Choke Conversion Kit is not returnable if original packaging is opened.…see more

Part Number
1221A
Electronic Choke Conversion Kit- Chrysler 1974-79 w/ 318 CID

Solid State Electronic Automatic Choke Kit- Easy to install electronic choke kit converts remote/divorced choke carburetors to a solid state electronic choke. Contains everything you need: Electric choke thermostat housing assembly and mounting bracket, choke rod, heat sensor, wiring and detailed instructions. Efficient choke operation affects fuel economy during the first 5 miles of driving after starting the engine. Note:
Choke rod moves down when thermostat element heats up.
Mounting hole distance: 2.75" (center to center) Applications:
Chrysler 1974-79 318 with Carter BBD 2bbl Carburetor. Note:
This choke kit is designed for use with original intake manifolds from applications listed above. It may or may not fit on aftermarket or different year/application intake manifolds. Aftermarket intakes may require the choke thermostat bracket and/or intake manifold to be modified and altered in order to mount electric choke to intake manifold. Electronic Choke Conversion Kit is not returnable if original packaging is opened.…see more

Part Number
1221E
Electronic Choke Conversion Kit- GM 1963-70 w/ 2bbl Rochester

Solid State Electronic Automatic Choke Kit- Easy to install electronic choke kit converts remote/divorced choke carburetors to a solid state electronic choke. Contains everything you need: Electric choke thermostat housing assembly and mounting bracket, choke rod, heat sensor, wiring and detailed instructions. Efficient choke operation affects fuel economy during the first 5 miles of driving after starting the engine. Note:
Choke rod moves down when thermostat element heats up. Applications:
Checker 1969 327 with Rochester Two-jet 2bbl Carburetor.
Checker 1970 350 with Rochester Two-jet 2bbl Carburetor.
Chevrolet 1963-70 283, 307, 327, 350, 400 with Rochester Two-jet 2bbl Carburetor.
Chevrolet 1969-70 307, 327, 350, 396, 400 with Rochester Two-jet 2bbl Carburetor.
Chevrolet Truck 1969 (all engines w/L.P. Gas) with Rochester Two-jet 2bbl Carburetor.
GMC Truck 1969 (all engines w/L.P. Gas) with Rochester Two-jet 2bbl Carburetor. Note:
This choke kit is designed for use with original intake manifolds from applications listed above. It may or may not fit on aftermarket or different year/application intake manifolds. Aftermarket intakes may require the choke thermostat bracket and/or intake manifold to be modified and altered in order to mount electric choke to intake manifold. Electronic Choke Conversion Kit is not returnable if original packaging is opened.…see more

Part Number
1221H
Electronic Choke Conversion Kit- GM 1963-72 w/ 4 & 6 cyl. engine

Solid State Electronic Automatic Choke Kit- Easy to install electronic choke kit converts remote/divorced choke carburetors to a solid state electronic choke. Contains everything you need: Electric choke thermostat housing assembly and mounting bracket, choke rod, heat sensor, wiring and detailed instructions. Efficient choke operation affects fuel economy during the first 5 miles of driving after starting the engine. Note:
Choke rod moves down when thermostat element heats up.
Mounting hole distance: .8" (center to center) Applications:
Chevrolet 1963-71 194, 230, 252 with Rochester Mono-jet 1bbl Carburetor.
Chevrolet 1970 153 4 cyl. with Rochester Mono-jet 1bbl Carburetor.
Chevrolet 1970 153 4 cyl. with Rochester Mono-jet 1bbl Carburetor.
Chevrolet Truck 1969-70 (all engines) with Rochester Mono-jet 1bbl Carburetor.
Checker 1968-70 230, 250 with Rochester Mono-jet 1bbl Carburetor.
Checker 1972 250 with Rochester Mono-jet 1bbl Carburetor.
Buick 1968-71 250 with Rochester Mono-jet 1bbl Carburetor.
GMC Truck 1970-71 250, 292 with Rochester Mono-jet 1bbl Carburetor.
Oldsmobile 1966-71 250 with Rochester Mono-jet 1bbl Carburetor.
Pontiac 1968-71 250 with Rochester Mono-jet 1bbl Carburetor. Note:
This choke kit is designed for use with original intake manifolds from applications listed above. It may or may not fit on aftermarket or different year/application intake manifolds. Aftermarket intakes may require the choke thermostat bracket and/or intake manifold to be modified and altered in order to mount electric choke to intake manifold. Electronic Choke Conversion Kit is not returnable if original packaging is opened.…see more

Part Number
1221D
Electronic Choke Conversion Kit- GM 1974-76 w/ 250 engine

Solid State Electronic Automatic Choke Kit- Easy to install electronic choke kit converts remote/divorced choke carburetors to a solid state electronic choke. Contains everything you need: Electric choke thermostat housing assembly and mounting bracket, choke rod, heat sensor, wiring and detailed instructions. Efficient choke operation affects fuel economy during the first 5 miles of driving after starting the engine. Note:
Choke rod moves down when thermostat element heats up. Applications:
Buick 1975-76 (w/ integrated head) 250 with Rochester Mono-jet 1bbl Carburetor.
Checker 1975-76 250 with Rochester Mono-jet 1bbl Carburetor.
Chevrolet 1975-76 250 with Rochester Mono-jet 1bbl Carburetor.
Chevrolet Truck 1974-76 250 with Rochester Mono-jet 1bbl Carburetor.
GMC Truck 1975-76 250 with Rochester Mono-jet 1bbl Carburetor. Note:
This choke kit is designed for use with original intake manifolds from applications listed above. It may or may not fit on aftermarket or different year/application intake manifolds. Aftermarket intakes may require the choke thermostat bracket and/or intake manifold to be modified and altered in order to mount electric choke to intake manifold. Electronic Choke Conversion Kit is not returnable if original packaging is opened.…see more

Part Number
1221F
Electronic Choke Conversion Kit- Mopar 1966-73 w/ 1bbl Carbureto

Solid State Electronic Automatic Choke Kit- Easy to install electronic choke kit converts remote/divorced choke carburetors to a solid state electronic choke. Contains everything you need: Electric choke thermostat housing assembly and mounting bracket, choke rod, heat sensor, wiring and detailed instructions. Efficient choke operation affects fuel economy during the first 5 miles of driving after starting the engine. Note:
Choke rod moves down when thermostat element heats up.
Mounting hole distance: 2.4" (center to center) Applications:
Dodge 1966-67 170, 225 with Carter BBS 1bbl Carburetor.
Dodge 1968-69 170, 225 with Holley 1920 1bbl Carburetor. (Except Taxi)
Dodge 1970-72 198, 225 with Carter BBS 1bbl Carburetor.
Dodge 1973 198, 225 with Holley 1920 1bbl Carburetor.
Dodge Truck 1966-71 170, 198, 225 with Holley 1920 1bbl Carburetor.
Dodge Truck 1966-71 225 with Carter BBS 1bbl Carburetor.
Dodge Truck 1972 with Holley 1920 1bbl Carburetor. (D, W-100) (B-300 Wagon Exc. 15 pass)
Dodge Truck 1972 with Carter BBS 1bbl Carburetor. (D, W, P-200, 300) (B-300 Van & 15 pass.)
Dodge Truck 1973 with Carter BBS 1bbl Carburetor. (D, W, P-200, 300) (D, W-100 Export) (B-300 Van & 15 pass.)
Plymouth 1966-72 170, 198, 225 with Carter BBS 1bbl Carburetor.
Plymouth 1966-72 170, 198, 225 with Holley 1920 1bbl Carburetor. Note:
This choke kit is designed for use with original intake manifolds from applications listed above. It may or may not fit on aftermarket or different year/application intake manifolds. Aftermarket intakes may require the choke thermostat bracket and/or intake manifold to be modified and altered in order to mount electric choke to intake manifold. Electronic Choke Conversion Kit is not returnable if original packaging is opened.…see more

Part Number
1221G
Electronic Choke Conversion Kit- Mopar 1968-69 w/ 273, 318, 383

Solid State Electronic Automatic Choke Kit- Easy to install electronic choke kit converts remote/divorced choke carburetors to a solid state electronic choke. Contains everything you need: Electric choke thermostat housing assembly and mounting bracket, choke rod, heat sensor, wiring and detailed instructions. Efficient choke operation affects fuel economy during the first 5 miles of driving after starting the engine. Note:
Choke rod moves down when thermostat element heats up.
Mounting hole distance: 2.75" (center to center) Applications:
Mopar 1968-69 273, 318, 383 with Carter BBD 2bbl Carburetor. Note:
This choke kit is designed for use with original intake manifolds from applications listed above. It may or may not fit on aftermarket or different year/application intake manifolds. Aftermarket intakes may require the choke thermostat bracket and/or intake manifold to be modified and altered in order to mount electric choke to intake manifold. Electronic Choke Conversion Kit is not returnable if original packaging is opened.…see more

Part Number
1221K
Electronic Choke Conversion Kit- Mopar 1973-79 w/ 1bbl Carbureto

Solid State Electronic Automatic Choke Kit- Easy to install electronic choke kit converts remote/divorced choke carburetors to a solid state electronic choke. Contains everything you need: Electric choke thermostat housing assembly and mounting bracket, choke rod, heat sensor, wiring and detailed instructions. Efficient choke operation affects fuel economy during the first 5 miles of driving after starting the engine. Note:
Choke rod pulls towards the choke unit when thermostat element heats up. Applications:
Dodge 1974 198, 225 with Holley 1bbl Carburetor.
Dodge 1975 225 with Holley 1bbl Carburetor.
Dodge Truck 1972 B-100, 200 Holley 1bbl Carburetor.
Dodge Truck 1973 (B-100, 200; D, W-100) with Holley 1bbl Carburetor.
Dodge Truck 1973 (B-300 Exc. 15 pass) with Carter BBS 1bbl Carburetor.
Dodge Truck 1974-75 225 with Carter BBS 1bbl Carburetor.
Plymouth 1973-75 198, 225 with Holley 1bbl Carburetor.
Chrysler Prod. 1976-79 225 with Holley 1bbl Carburetor. Note:
This choke kit is designed for use with original intake manifolds from applications listed above. It may or may not fit on aftermarket or different year/application intake manifolds. Aftermarket intakes may require the choke thermostat bracket and/or intake manifold to be modified and altered in order to mount electric choke to intake manifold. Electronic Choke Conversion Kit is not returnable if original packaging is opened.…see more

Part Number
1221J
Result Pages: