JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Result Pages:
Mercarb Accelerator Pump Return Spring -

Mercarb marine carburetor pump return spring. MADE IN THE USA. Dimensions:
Spring length: 1.1"
Spring outside diameter: .470"
Spring wire thickness: .038" Quantity: 1…see more

Part Number
1040C
Mercarb Ethanol Rated Accelerator Pump Assembly- OAL: 2.01"

Mercarb marine carburetor pump assembly comes with ethanol resistant pump cup to withstand todays fuel with alcohol / ethanol. Complete accelerator pump plunger assembly with heavy duty alcohol resistant pump cup. MADE IN THE USA. Fits older mercarb carburetors with straight accelerator plunger stem. Mercarb Marine carburetors that use this accelerator pump assembly:
1389-8488A2, 1389-8489A5, 1389-8490A2, 1389-9350A2, 3304-9353A2 Not sure where to find your carburetor number? Click here to read artical on Carburetor Number Identification.  Note: Although the pump cup is not colored the "normal" blue, it is made from an ethanol resistant viton material that is compatable with today's new fuels. Dimensions:
Cup Diameter: 21/32"
OAL: 2.01"
Stem Diameter: .234"…see more

Part Number
1001A
Mercarb Marine Accelerator Pump Assembly- Garter Spring style, O

Garter Spring style Mercarb marine carburetor pump assembly comes with ethanol resistant pump cup to withstand todays fuel with alcohol / ethanol. Complete accelerator pump plunger assembly with heavy duty alcohol resistant garter spring cup. MADE IN THE USA. Fits newer mercarb carburetors with 90 degree bend accelerator plunger stem. Mercarb Marine carburetors that use this accelerator pump assembly:
1389-815397, 1389-9562A1, 1389-9563A1, 1389-9564A1, 1389-9670A2, 3304-9565A1, 3310-805924, 3310-806077, 3310-806080, 3310-806972, 3310-807312, 3310-807504, 3310-807764, 3310-861245, 3310-861448, 3310-864940, 3310-864942, 3310-864943, 3310-866140, 3310-866141, 3310-866142, 3310-866143 Not sure where to find your carburetor number? Click here to read artical on Carburetor Number Identification.  Note: Not all blue accelerator pump cups on the market are resistant to todays new fuels, dont be mislead by the color, demand the best! Dimensions:
Cup Diameter:
OAL: 2.350"…see more

Part Number
1001B
Mercarb Marine Needle and Seat Assembly

Stock Replacement needle and seat assembly for Mercarb marine carburetors. Compatible with new alcohol enhanced fuels. This Mercarb marine needle and seat assembly comes with two different needles, Spring loaded and solid. 'Seat' Dimensions:
Thread Diameter: .309"
Overall Length: .955" (not including needle) Made in the USA!…see more

Part Number
3422A
Mercarb Marine Rebuild Kit - (Early style) 4034B

Premium quality Mercarb marine rebuild kits. Updated for use with today's common pump gasoline that contains alcohol. Quality OEM style needle and seat assembly, no generic "all in one" seat assembly in our kits. Most complete kit available for the Mercarb carburetor.
Fits early style Mercarb with Straight accelerator pump stem.
Made in the USA. Replaces Mercury Marine repair kit #3302-804845 This kit contains the following parts:
Flange gasket
Throttle Body gasket
Bowl cover gasket
Venturi cluster gasket
Air cleaner gasket
Fuel Filter
Power valve assembly
Accelerator pump plunger, straight stem (alcohol resistant)
Accelerator pump return spring
Check balls
Inlet needle and seat assembly and gasket
Fuel inlet gasket
Float height setting tool
Idle Mixture Screw
Assortment of clips
Illustrated instructions included Not sure which rebuild kit is correct for your carburetor?
Use the "Search for your Rebuild Kit" search on the Mercarb Rebuild Kits main page, just enter in your Mercarb carburetor number. Picture Information:
Picture showing rebuild kit components is an accurate representation of the style of gaskets you will receive. However, there may be slight differences in materials due to parts availability. These differences will not affect performance of the rebuild kit. Mercarb Marine Applications:
Mercury Marine (4,6,8)
Replaces Mercruiser kit # 3302-804845 Mercarb Marine carburetors serviced with this rebuild kit:
1389-8488A2, 1389-8489A5, 1389-8490A2, 1389-9350A2, 3304-9353A2 Not sure where to find your carburetor number? Click here to read article on Carburetor Number Identification.  Mercarb Marine Carburetor Rebuild Kit Instructions, Specifications, & How to Information:…see more

Part Number
4034B
Mercarb Marine Rebuild Kit - Later Style 4034A

Premium quality Mercarb marine rebuild kits. Updated for use with today's common pump gasoline that contains alcohol. Quality OEM style needle and seat assembly, no generic "all in one" seat assembly in our kits. Most complete kit available for the Mercarb carburetor.
Fits later style Mercarb with 90 degree bent accelerator pump stem.
Made in the USA. Replaces Mercury Marine repair kit #3302-804844 This kit contains the following parts:
Flange gasket
Throttle Body gasket
Bowl cover gasket
Venturi cluster gasket
Air cleaner gasket
Fuel Filter
Power valve assembly
Accelerator pump plunger, w/ 90 degree stem (alcohol resistant)
Check balls
Inlet needle and seat assembly and gasket
Fuel inlet gasket
Float height setting tool
Idle Mixture Screw
Assortment of clips
Illustrated instructions included Not sure which rebuild kit is correct for your carburetor?
Use the "Search for your Rebuild Kit" search on the Mercarb Rebuild Kits main page, just enter in your Mercarb carburetor number. Picture Information:
Picture showing rebuild kit components is an accurate representation of the style of gaskets you will receive. However, there may be slight differences in materials due to parts availability. These differences will not affect performance of the rebuild kit. Mercarb Marine Applications:
Mercury Marine (4,6,8)
Replacement for Mercruiser rebuild kit # 3302-804844 Mercarb Marine carburetors serviced with this rebuild kit:
1389-815397, 1389-9562A1, 1389-9563A1, 1389-9564A1, 1389-9670A2, 3304-9565A1, 3310-805924, 3310-806077, 3310-806080, 3310-806972, 3310-807312, 3310-807504, 3310-807764, 3310-861245, 3310-861448, 3310-864940, 3310-864942, 3310-864943, 3310-866140, 3310-866141, 3310-866142, 3310-866143 Not sure where to find your carburetor number? Click here to read article on Carburetor Number Identification.    Mercarb Marine Carburetor Rebuild Kit Instructions, Specifications, & How to Information:…see more

Part Number
4034A
Metal Tube .276" OD x 1" Length

Dimensions:
Overall length: 1"
Tube OD: .276"
Metal tube. Fits:
Rochester Quadrajet carburetors
Rochester B, BC, BV carburetors
May also fit other applications. Quantity: 1…see more

Part Number
4827K
Metal Tube .375" OD x 1.36" Length

Dimensions:
Overall length: 1.36"
Tube OD: .375 (.415" flare)
Metal tube. Fits:
Carter Thermo-Quad carburetors
Carter BBS carburetors
Carter BBD carburetors
Holley 4180, 4190 carburetors
Holley 1904, 1908, 1920, 1931, 1960 carburetors
Holley 1940, 1945, 6145 carburetors
Holley 1946, 6146 carburetors
Holley 1949, 6149 carburetors
Holley 2209, 2210, 2245 carburetors
Holley 2280, 6280C carburetors
Holley 5200, 5210, 5220 carburetors
Holley 6500, 6510, 6520 carburetors
Rochester Quadrajet carburetors
Rochester Monojet carburetors
Rochester 2G (Twojet) carburetors
Rochester Dualjet carburetors
Rochester Varajet carburetors
Stromberg WW, WWC carburetors
May also fit other applications. Quantity: 1…see more

Part Number
4827D
Metal Vacuum Tee, 3/16"x 1/4" x 1/4"


3-way Metal Tee has two...see more

3-way Metal Tee has two 1/4" OD tubes and one 3/6" OD tube.…see more

Part Number
4820
Metering Jet .041" - fits Rochester "B", "H", "2G", "4G" Carbure


Quantity: 1 jet, USA made metering jet...see more

USA made metering jet is used in Rochester carburetors. Fits:
Rochester "B" carburetors.
Rochester "H" carburetors.
Rochester "2G" or Twojet carburetors.
Rochester "4G" or Fourjet carburetors. Used to tailor air fuel ratio. Number indicates jet size and dimension of jet hole. (For example: a jet stamped 60 will have a .060" orifice) A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your carburetor can pay big dividends at the race track and/or increased fuel efficiency. Jet number is stamped into each jet. Quantity: 1 Jet IMPORTANT INFORMATION:
Jets are sold singly.
If you have a TwoJet / 2G carburetor, You need to order 2 Jets.
If you have a FourJet / 4G carburetor, You need to order 2 Jets for the primary side and two jets for the secondary side of the carburetor. Note:
These metering jets are correctly profiled and specifically made for the Rochester "B", "H", "2G" and "4G" carburetors. Rochester products made several different styles of jets for use in Quadrajets, 1bbl and 2bbl carburetors, each with their own unique leading and trailing profile on each side of the jet orifice. Be careful as all the various styles will physically interchange and for example, they could all have a .070" jet orifice but due to the leading and trailing profiles being different, each style will have different flow rates. Make sure that you are using correct metering jet in your carburetor by using QuadrajetParts.com jets. Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more

Part Number
2401-41
Metering Jet .042" - fits Rochester "B", "H", "2G", "4G" Carbure


Quantity: 1 jet, USA made...see more

USA made metering jet is used in Rochester carburetors. Fits:
Rochester "B" carburetors.
Rochester "H" carburetors.
Rochester "2G" or Twojet carburetors.
Rochester "4G" or Fourjet carburetors. Used to tailor air fuel ratio. Number indicates jet size and dimension of jet hole. (For example: a jet stamped 60 will have a .060" orifice) A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your carburetor can pay big dividends at the race track and/or increased fuel efficiency. Jet number is stamped into each jet. Quantity: 1 Jet IMPORTANT INFORMATION:
Jets are sold singly.
If you have a TwoJet / 2G carburetor, You need to order 2 Jets.
If you have a FourJet / 4G carburetor, You need to order 2 Jets for the primary side and two jets for the secondary side of the carburetor. Note:
These metering jets are correctly profiled and specifically made for the Rochester "B", "H", "2G" and "4G" carburetors. Rochester products made several different styles of jets for use in Quadrajets, 1bbl and 2bbl carburetors, each with their own unique leading and trailing profile on each side of the jet orifice. Be careful as all the various styles will physically interchange and for example, they could all have a .070" jet orifice but due to the leading and trailing profiles being different, each style will have different flow rates. Make sure that you are using correct metering jet in your carburetor by using QuadrajetParts.com jets. Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more

Part Number
2401-42
Metering Jet .043" - fits Rochester "B", "H", "2G", "4G" Carbure


Quantity: 1 jet, USA made metering jet...see more

USA made metering jet is used in Rochester carburetors. Fits:
Rochester "B" carburetors.
Rochester "H" carburetors.
Rochester "2G" or Twojet carburetors.
Rochester "4G" or Fourjet carburetors. Used to tailor air fuel ratio. Number indicates jet size and dimension of jet hole. (For example: a jet stamped 60 will have a .060" orifice) A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your carburetor can pay big dividends at the race track and/or increased fuel efficiency. Jet number is stamped into each jet. Quantity: 1 Jet IMPORTANT INFORMATION:
Jets are sold singly.
If you have a TwoJet / 2G carburetor, You need to order 2 Jets.
If you have a FourJet / 4G carburetor, You need to order 2 Jets for the primary side and two jets for the secondary side of the carburetor. Note:
These metering jets are correctly profiled and specifically made for the Rochester "B", "H", "2G" and "4G" carburetors. Rochester products made several different styles of jets for use in Quadrajets, 1bbl and 2bbl carburetors, each with their own unique leading and trailing profile on each side of the jet orifice. Be careful as all the various styles will physically interchange and for example, they could all have a .070" jet orifice but due to the leading and trailing profiles being different, each style will have different flow rates. Make sure that you are using correct metering jet in your carburetor by using QuadrajetParts.com jets. Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more

Part Number
2401-43
Metering Jet .044" - fits Rochester "B", "H", "2G", "4G" Carbure


Quantity: 1 jet, USA made metering jet...see more

USA made metering jet is used in Rochester carburetors. Fits:
Rochester "B" carburetors.
Rochester "H" carburetors.
Rochester "2G" or Twojet carburetors.
Rochester "4G" or Fourjet carburetors. Used to tailor air fuel ratio. Number indicates jet size and dimension of jet hole. (For example: a jet stamped 60 will have a .060" orifice) A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your carburetor can pay big dividends at the race track and/or increased fuel efficiency. Jet number is stamped into each jet. Quantity: 1 Jet IMPORTANT INFORMATION:
Jets are sold singly.
If you have a TwoJet / 2G carburetor, You need to order 2 Jets.
If you have a FourJet / 4G carburetor, You need to order 2 Jets for the primary side and two jets for the secondary side of the carburetor. Note:
These metering jets are correctly profiled and specifically made for the Rochester "B", "H", "2G" and "4G" carburetors. Rochester products made several different styles of jets for use in Quadrajets, 1bbl and 2bbl carburetors, each with their own unique leading and trailing profile on each side of the jet orifice. Be careful as all the various styles will physically interchange and for example, they could all have a .070" jet orifice but due to the leading and trailing profiles being different, each style will have different flow rates. Make sure that you are using correct metering jet in your carburetor by using QuadrajetParts.com jets. Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more

Part Number
2401-44
Metering Jet .045" - fits Rochester "B", "H", "2G", "4G" Carbure


Quantity: 1 jet, USA made metering jet...see more

USA made metering jet is used in Rochester carburetors. Fits:
Rochester "B" carburetors.
Rochester "H" carburetors.
Rochester "2G" or Twojet carburetors.
Rochester "4G" or Fourjet carburetors. Used to tailor air fuel ratio. Number indicates jet size and dimension of jet hole. (For example: a jet stamped 60 will have a .060" orifice) A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your carburetor can pay big dividends at the race track and/or increased fuel efficiency. Jet number is stamped into each jet. Quantity: 1 Jet IMPORTANT INFORMATION:
Jets are sold singly.
If you have a TwoJet / 2G carburetor, You need to order 2 Jets.
If you have a FourJet / 4G carburetor, You need to order 2 Jets for the primary side and two jets for the secondary side of the carburetor. Note:
These metering jets are correctly profiled and specifically made for the Rochester "B", "H", "2G" and "4G" carburetors. Rochester products made several different styles of jets for use in Quadrajets, 1bbl and 2bbl carburetors, each with their own unique leading and trailing profile on each side of the jet orifice. Be careful as all the various styles will physically interchange and for example, they could all have a .070" jet orifice but due to the leading and trailing profiles being different, each style will have different flow rates. Make sure that you are using correct metering jet in your carburetor by using QuadrajetParts.com jets. Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more

Part Number
2401-45
Metering Jet .046" - fits Rochester "B", "H", "2G", "4G" Carbure


Quantity: 1 jet, USA made metering jet...see more

USA made metering jet is used in Rochester carburetors. Fits:
Rochester "B" carburetors.
Rochester "H" carburetors.
Rochester "2G" or Twojet carburetors.
Rochester "4G" or Fourjet carburetors. Used to tailor air fuel ratio. Number indicates jet size and dimension of jet hole. (For example: a jet stamped 60 will have a .060" orifice) A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your carburetor can pay big dividends at the race track and/or increased fuel efficiency. Jet number is stamped into each jet. Quantity: 1 Jet IMPORTANT INFORMATION:
Jets are sold singly.
If you have a TwoJet / 2G carburetor, You need to order 2 Jets.
If you have a FourJet / 4G carburetor, You need to order 2 Jets for the primary side and two jets for the secondary side of the carburetor. Note:
These metering jets are correctly profiled and specifically made for the Rochester "B", "H", "2G" and "4G" carburetors. Rochester products made several different styles of jets for use in Quadrajets, 1bbl and 2bbl carburetors, each with their own unique leading and trailing profile on each side of the jet orifice. Be careful as all the various styles will physically interchange and for example, they could all have a .070" jet orifice but due to the leading and trailing profiles being different, each style will have different flow rates. Make sure that you are using correct metering jet in your carburetor by using QuadrajetParts.com jets. Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more

Part Number
2401-46
Metering Jet .047" - fits Rochester "B", "H", "2G", "4G" Carbure


Quantity: 1 jet, USA made metering jet...see more

USA made metering jet is used in Rochester carburetors. Fits:
Rochester "B" carburetors.
Rochester "H" carburetors.
Rochester "2G" or Twojet carburetors.
Rochester "4G" or Fourjet carburetors. Used to tailor air fuel ratio. Number indicates jet size and dimension of jet hole. (For example: a jet stamped 60 will have a .060" orifice) A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your carburetor can pay big dividends at the race track and/or increased fuel efficiency. Jet number is stamped into each jet. Quantity: 1 Jet IMPORTANT INFORMATION:
Jets are sold singly.
If you have a TwoJet / 2G carburetor, You need to order 2 Jets.
If you have a FourJet / 4G carburetor, You need to order 2 Jets for the primary side and two jets for the secondary side of the carburetor. Note:
These metering jets are correctly profiled and specifically made for the Rochester "B", "H", "2G" and "4G" carburetors. Rochester products made several different styles of jets for use in Quadrajets, 1bbl and 2bbl carburetors, each with their own unique leading and trailing profile on each side of the jet orifice. Be careful as all the various styles will physically interchange and for example, they could all have a .070" jet orifice but due to the leading and trailing profiles being different, each style will have different flow rates. Make sure that you are using correct metering jet in your carburetor by using QuadrajetParts.com jets. Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more

Part Number
2401-47
Metering Jet .048" - fits Rochester "B", "H", "2G", "4G" Carbure


Quantity: 1 jet, USA made metering jet...see more

USA made metering jet is used in Rochester carburetors. Fits:
Rochester "B" carburetors.
Rochester "H" carburetors.
Rochester "2G" or Twojet carburetors.
Rochester "4G" or Fourjet carburetors. Used to tailor air fuel ratio. Number indicates jet size and dimension of jet hole. (For example: a jet stamped 60 will have a .060" orifice) A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your carburetor can pay big dividends at the race track and/or increased fuel efficiency. Jet number is stamped into each jet. Quantity: 1 Jet IMPORTANT INFORMATION:
Jets are sold singly.
If you have a TwoJet / 2G carburetor, You need to order 2 Jets.
If you have a FourJet / 4G carburetor, You need to order 2 Jets for the primary side and two jets for the secondary side of the carburetor. Note:
These metering jets are correctly profiled and specifically made for the Rochester "B", "H", "2G" and "4G" carburetors. Rochester products made several different styles of jets for use in Quadrajets, 1bbl and 2bbl carburetors, each with their own unique leading and trailing profile on each side of the jet orifice. Be careful as all the various styles will physically interchange and for example, they could all have a .070" jet orifice but due to the leading and trailing profiles being different, each style will have different flow rates. Make sure that you are using correct metering jet in your carburetor by using QuadrajetParts.com jets. Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more

Part Number
2401-48
Metering Jet .049" - fits Rochester "B", "H", "2G", "4G" Carbure


Quantity: 1 jet, USA made metering jet...see more

USA made metering jet is used in Rochester carburetors. Fits:
Rochester "B" carburetors.
Rochester "H" carburetors.
Rochester "2G" or Twojet carburetors.
Rochester "4G" or Fourjet carburetors. Used to tailor air fuel ratio. Number indicates jet size and dimension of jet hole. (For example: a jet stamped 60 will have a .060" orifice) A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your carburetor can pay big dividends at the race track and/or increased fuel efficiency. Jet number is stamped into each jet. Quantity: 1 Jet IMPORTANT INFORMATION:
Jets are sold singly.
If you have a TwoJet / 2G carburetor, You need to order 2 Jets.
If you have a FourJet / 4G carburetor, You need to order 2 Jets for the primary side and two jets for the secondary side of the carburetor. Note:
These metering jets are correctly profiled and specifically made for the Rochester "B", "H", "2G" and "4G" carburetors. Rochester products made several different styles of jets for use in Quadrajets, 1bbl and 2bbl carburetors, each with their own unique leading and trailing profile on each side of the jet orifice. Be careful as all the various styles will physically interchange and for example, they could all have a .070" jet orifice but due to the leading and trailing profiles being different, each style will have different flow rates. Make sure that you are using correct metering jet in your carburetor by using QuadrajetParts.com jets. Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more

Part Number
2401-49
Metering Jet .050" - fits Rochester "B", "H", "2G", "4G" Carbure


Quantity: 1 jet, USA made metering jet...see more

USA made metering jet is used in Rochester carburetors. Fits:
Rochester "B" carburetors.
Rochester "H" carburetors.
Rochester "2G" or Twojet carburetors.
Rochester "4G" or Fourjet carburetors. Used to tailor air fuel ratio. Number indicates jet size and dimension of jet hole. (For example: a jet stamped 60 will have a .060" orifice) A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your carburetor can pay big dividends at the race track and/or increased fuel efficiency. Jet number is stamped into each jet. Quantity: 1 Jet IMPORTANT INFORMATION:
Jets are sold singly.
If you have a TwoJet / 2G carburetor, You need to order 2 Jets.
If you have a FourJet / 4G carburetor, You need to order 2 Jets for the primary side and two jets for the secondary side of the carburetor. Note:
These metering jets are correctly profiled and specifically made for the Rochester "B", "H", "2G" and "4G" carburetors. Rochester products made several different styles of jets for use in Quadrajets, 1bbl and 2bbl carburetors, each with their own unique leading and trailing profile on each side of the jet orifice. Be careful as all the various styles will physically interchange and for example, they could all have a .070" jet orifice but due to the leading and trailing profiles being different, each style will have different flow rates. Make sure that you are using correct metering jet in your carburetor by using QuadrajetParts.com jets.…see more

Part Number
2401-50
Metering Jet .051" - fits Rochester "B", "H", "2G", "4G" Carbure


Quantity: 1 jet, USA made metering jet...see more

USA made metering jet is used in Rochester carburetors. Fits:
Rochester "B" carburetors.
Rochester "H" carburetors.
Rochester "2G" or Twojet carburetors.
Rochester "4G" or Fourjet carburetors. Used to tailor air fuel ratio. Number indicates jet size and dimension of jet hole. (For example: a jet stamped 60 will have a .060" orifice) A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your carburetor can pay big dividends at the race track and/or increased fuel efficiency. Jet number is stamped into each jet. Quantity: 1 Jet IMPORTANT INFORMATION:
Jets are sold singly.
If you have a TwoJet / 2G carburetor, You need to order 2 Jets.
If you have a FourJet / 4G carburetor, You need to order 2 Jets for the primary side and two jets for the secondary side of the carburetor. Note:
These metering jets are correctly profiled and specifically made for the Rochester "B", "H", "2G" and "4G" carburetors. Rochester products made several different styles of jets for use in Quadrajets, 1bbl and 2bbl carburetors, each with their own unique leading and trailing profile on each side of the jet orifice. Be careful as all the various styles will physically interchange and for example, they could all have a .070" jet orifice but due to the leading and trailing profiles being different, each style will have different flow rates. Make sure that you are using correct metering jet in your carburetor by using QuadrajetParts.com jets. Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more

Part Number
2401-51
Metering Jet .052" - fits Rochester "B", "H", "2G", "4G" Carbure


Quantity: 1 jet, USA made metering jet...see more

USA made metering jet is used in Rochester carburetors. Fits:
Rochester "B" carburetors.
Rochester "H" carburetors.
Rochester "2G" or Twojet carburetors.
Rochester "4G" or Fourjet carburetors. Used to tailor air fuel ratio. Number indicates jet size and dimension of jet hole. (For example: a jet stamped 60 will have a .060" orifice) A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your carburetor can pay big dividends at the race track and/or increased fuel efficiency. Jet number is stamped into each jet. Quantity: 1 Jet IMPORTANT INFORMATION:
Jets are sold singly.
If you have a TwoJet / 2G carburetor, You need to order 2 Jets.
If you have a FourJet / 4G carburetor, You need to order 2 Jets for the primary side and two jets for the secondary side of the carburetor. Note:
These metering jets are correctly profiled and specifically made for the Rochester "B", "H", "2G" and "4G" carburetors. Rochester products made several different styles of jets for use in Quadrajets, 1bbl and 2bbl carburetors, each with their own unique leading and trailing profile on each side of the jet orifice. Be careful as all the various styles will physically interchange and for example, they could all have a .070" jet orifice but due to the leading and trailing profiles being different, each style will have different flow rates. Make sure that you are using correct metering jet in your carburetor by using QuadrajetParts.com jets. Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more

Part Number
2401-52
Metering Jet .053" - fits Rochester "B", "H", "2G", "4G" Carbure


Quantity: 1 jet, USA made metering jet...see more

USA made metering jet is used in Rochester carburetors. Fits:
Rochester "B" carburetors.
Rochester "H" carburetors.
Rochester "2G" or Twojet carburetors.
Rochester "4G" or Fourjet carburetors. Used to tailor air fuel ratio. Number indicates jet size and dimension of jet hole. (For example: a jet stamped 60 will have a .060" orifice) A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your carburetor can pay big dividends at the race track and/or increased fuel efficiency. Jet number is stamped into each jet. Quantity: 1 Jet IMPORTANT INFORMATION:
Jets are sold singly.
If you have a TwoJet / 2G carburetor, You need to order 2 Jets.
If you have a FourJet / 4G carburetor, You need to order 2 Jets for the primary side and two jets for the secondary side of the carburetor. Note:
These metering jets are correctly profiled and specifically made for the Rochester "B", "H", "2G" and "4G" carburetors. Rochester products made several different styles of jets for use in Quadrajets, 1bbl and 2bbl carburetors, each with their own unique leading and trailing profile on each side of the jet orifice. Be careful as all the various styles will physically interchange and for example, they could all have a .070" jet orifice but due to the leading and trailing profiles being different, each style will have different flow rates. Make sure that you are using correct metering jet in your carburetor by using QuadrajetParts.com jets. Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more

Part Number
2401-53
Metering Jet .054" - fits Rochester "B", "H", "2G", "4G" Carbure


Quantity: 1 jet, USA made metering jet...see more

USA made metering jet is used in Rochester carburetors. Fits:
Rochester "B" carburetors.
Rochester "H" carburetors.
Rochester "2G" or Twojet carburetors.
Rochester "4G" or Fourjet carburetors. Used to tailor air fuel ratio. Number indicates jet size and dimension of jet hole. (For example: a jet stamped 60 will have a .060" orifice) A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your carburetor can pay big dividends at the race track and/or increased fuel efficiency. Jet number is stamped into each jet. Quantity: 1 Jet IMPORTANT INFORMATION:
Jets are sold singly.
If you have a TwoJet / 2G carburetor, You need to order 2 Jets.
If you have a FourJet / 4G carburetor, You need to order 2 Jets for the primary side and two jets for the secondary side of the carburetor. Note:
These metering jets are correctly profiled and specifically made for the Rochester "B", "H", "2G" and "4G" carburetors. Rochester products made several different styles of jets for use in Quadrajets, 1bbl and 2bbl carburetors, each with their own unique leading and trailing profile on each side of the jet orifice. Be careful as all the various styles will physically interchange and for example, they could all have a .070" jet orifice but due to the leading and trailing profiles being different, each style will have different flow rates. Make sure that you are using correct metering jet in your carburetor by using QuadrajetParts.com jets. Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more

Part Number
2401-54
Metering Jet .055" - fits Rochester "B", "H", "2G", "4G" Carbure


Quantity: 1 jet, USA made metering jet...see more

USA made metering jet is used in Rochester carburetors. Fits:
Rochester "B" carburetors.
Rochester "H" carburetors.
Rochester "2G" or Twojet carburetors.
Rochester "4G" or Fourjet carburetors. Used to tailor air fuel ratio. Number indicates jet size and dimension of jet hole. (For example: a jet stamped 60 will have a .060" orifice) A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your carburetor can pay big dividends at the race track and/or increased fuel efficiency. Jet number is stamped into each jet. Quantity: 1 Jet IMPORTANT INFORMATION:
Jets are sold singly.
If you have a TwoJet / 2G carburetor, You need to order 2 Jets.
If you have a FourJet / 4G carburetor, You need to order 2 Jets for the primary side and two jets for the secondary side of the carburetor. Note:
These metering jets are correctly profiled and specifically made for the Rochester "B", "H", "2G" and "4G" carburetors. Rochester products made several different styles of jets for use in Quadrajets, 1bbl and 2bbl carburetors, each with their own unique leading and trailing profile on each side of the jet orifice. Be careful as all the various styles will physically interchange and for example, they could all have a .070" jet orifice but due to the leading and trailing profiles being different, each style will have different flow rates. Make sure that you are using correct metering jet in your carburetor by using QuadrajetParts.com jets. Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more

Part Number
2401-55
Metering Jet .056" - fits Rochester "B", "H", "2G", "4G" Carbure


Quantity: 1 jet, USA made metering jet...see more

USA made metering jet is used in Rochester carburetors. Fits:
Rochester "B" carburetors.
Rochester "H" carburetors.
Rochester "2G" or Twojet carburetors.
Rochester "4G" or Fourjet carburetors. Used to tailor air fuel ratio. Number indicates jet size and dimension of jet hole. (For example: a jet stamped 60 will have a .060" orifice) A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your carburetor can pay big dividends at the race track and/or increased fuel efficiency. Jet number is stamped into each jet. Quantity: 1 Jet IMPORTANT INFORMATION:
Jets are sold singly.
If you have a TwoJet / 2G carburetor, You need to order 2 Jets.
If you have a FourJet / 4G carburetor, You need to order 2 Jets for the primary side and two jets for the secondary side of the carburetor. Note:
These metering jets are correctly profiled and specifically made for the Rochester "B", "H", "2G" and "4G" carburetors. Rochester products made several different styles of jets for use in Quadrajets, 1bbl and 2bbl carburetors, each with their own unique leading and trailing profile on each side of the jet orifice. Be careful as all the various styles will physically interchange and for example, they could all have a .070" jet orifice but due to the leading and trailing profiles being different, each style will have different flow rates. Make sure that you are using correct metering jet in your carburetor by using QuadrajetParts.com jets. Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more

Part Number
2401-56
Metering Jet .057" - fits Rochester "B", "H", "2G", "4G" Carbure


Quantity: 1 jet, USA made metering jet...see more

USA made metering jet is used in Rochester carburetors. Fits:
Rochester "B" carburetors.
Rochester "H" carburetors.
Rochester "2G" or Twojet carburetors.
Rochester "4G" or Fourjet carburetors. Used to tailor air fuel ratio. Number indicates jet size and dimension of jet hole. (For example: a jet stamped 60 will have a .060" orifice) A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your carburetor can pay big dividends at the race track and/or increased fuel efficiency. Jet number is stamped into each jet. Quantity: 1 Jet IMPORTANT INFORMATION:
Jets are sold singly.
If you have a TwoJet / 2G carburetor, You need to order 2 Jets.
If you have a FourJet / 4G carburetor, You need to order 2 Jets for the primary side and two jets for the secondary side of the carburetor. Note:
These metering jets are correctly profiled and specifically made for the Rochester "B", "H", "2G" and "4G" carburetors. Rochester products made several different styles of jets for use in Quadrajets, 1bbl and 2bbl carburetors, each with their own unique leading and trailing profile on each side of the jet orifice. Be careful as all the various styles will physically interchange and for example, they could all have a .070" jet orifice but due to the leading and trailing profiles being different, each style will have different flow rates. Make sure that you are using correct metering jet in your carburetor by using QuadrajetParts.com jets. Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more

Part Number
2401-57
Metering Jet .058" - fits Rochester "B", "H", "2G", "4G" Carbure


Quantity: 1 jet, USA made metering jet...see more

USA made metering jet is used in Rochester carburetors. Fits:
Rochester "B" carburetors.
Rochester "H" carburetors.
Rochester "2G" or Twojet carburetors.
Rochester "4G" or Fourjet carburetors. Used to tailor air fuel ratio. Number indicates jet size and dimension of jet hole. (For example: a jet stamped 60 will have a .060" orifice) A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your carburetor can pay big dividends at the race track and/or increased fuel efficiency. Jet number is stamped into each jet. Quantity: 1 Jet IMPORTANT INFORMATION:
Jets are sold singly.
If you have a TwoJet / 2G carburetor, You need to order 2 Jets.
If you have a FourJet / 4G carburetor, You need to order 2 Jets for the primary side and two jets for the secondary side of the carburetor. Note:
These metering jets are correctly profiled and specifically made for the Rochester "B", "H", "2G" and "4G" carburetors. Rochester products made several different styles of jets for use in Quadrajets, 1bbl and 2bbl carburetors, each with their own unique leading and trailing profile on each side of the jet orifice. Be careful as all the various styles will physically interchange and for example, they could all have a .070" jet orifice but due to the leading and trailing profiles being different, each style will have different flow rates. Make sure that you are using correct metering jet in your carburetor by using QuadrajetParts.com jets. Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more

Part Number
2401-58
Metering Jet .059" - fits Rochester "B", "H", "2G", "4G" Carbure


Quantity: 1 jet, USA made metering jet...see more

USA made metering jet is used in Rochester carburetors. Fits:
Rochester "B" carburetors.
Rochester "H" carburetors.
Rochester "2G" or Twojet carburetors.
Rochester "4G" or Fourjet carburetors. Used to tailor air fuel ratio. Number indicates jet size and dimension of jet hole. (For example: a jet stamped 60 will have a .060" orifice) A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your carburetor can pay big dividends at the race track and/or increased fuel efficiency. Jet number is stamped into each jet. Quantity: 1 Jet IMPORTANT INFORMATION:
Jets are sold singly.
If you have a TwoJet / 2G carburetor, You need to order 2 Jets.
If you have a FourJet / 4G carburetor, You need to order 2 Jets for the primary side and two jets for the secondary side of the carburetor. Note:
These metering jets are correctly profiled and specifically made for the Rochester "B", "H", "2G" and "4G" carburetors. Rochester products made several different styles of jets for use in Quadrajets, 1bbl and 2bbl carburetors, each with their own unique leading and trailing profile on each side of the jet orifice. Be careful as all the various styles will physically interchange and for example, they could all have a .070" jet orifice but due to the leading and trailing profiles being different, each style will have different flow rates. Make sure that you are using correct metering jet in your carburetor by using QuadrajetParts.com jets. Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more

Part Number
2401-59
Metering Jet .060" - fits Rochester "B", "H", "2G", "4G" Carbure


Quantity: 1 jet, USA made metering jet...see more

USA made metering jet is used in Rochester carburetors. Fits:
Rochester "B" carburetors.
Rochester "H" carburetors.
Rochester "2G" or Twojet carburetors.
Rochester "4G" or Fourjet carburetors. Used to tailor air fuel ratio. Number indicates jet size and dimension of jet hole. (For example: a jet stamped 60 will have a .060" orifice) A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your carburetor can pay big dividends at the race track and/or increased fuel efficiency. Jet number is stamped into each jet. Quantity: 1 Jet IMPORTANT INFORMATION:
Jets are sold singly.
If you have a TwoJet / 2G carburetor, You need to order 2 Jets.
If you have a FourJet / 4G carburetor, You need to order 2 Jets for the primary side and two jets for the secondary side of the carburetor. Note:
These metering jets are correctly profiled and specifically made for the Rochester "B", "H", "2G" and "4G" carburetors. Rochester products made several different styles of jets for use in Quadrajets, 1bbl and 2bbl carburetors, each with their own unique leading and trailing profile on each side of the jet orifice. Be careful as all the various styles will physically interchange and for example, they could all have a .070" jet orifice but due to the leading and trailing profiles being different, each style will have different flow rates. Make sure that you are using correct metering jet in your carburetor by using QuadrajetParts.com jets. Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more

Part Number
2401-60
Metering Jet .061" - fits Rochester "B", "H", "2G", "4G" Carbure


Quantity: 1 jet, USA made metering jet...see more

USA made metering jet is used in Rochester carburetors. Fits:
Rochester "B" carburetors.
Rochester "H" carburetors.
Rochester "2G" or Twojet carburetors.
Rochester "4G" or Fourjet carburetors. Used to tailor air fuel ratio. Number indicates jet size and dimension of jet hole. (For example: a jet stamped 60 will have a .060" orifice) A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your carburetor can pay big dividends at the race track and/or increased fuel efficiency. Jet number is stamped into each jet. Quantity: 1 Jet IMPORTANT INFORMATION:
Jets are sold singly.
If you have a TwoJet / 2G carburetor, You need to order 2 Jets.
If you have a FourJet / 4G carburetor, You need to order 2 Jets for the primary side and two jets for the secondary side of the carburetor. Note:
These metering jets are correctly profiled and specifically made for the Rochester "B", "H", "2G" and "4G" carburetors. Rochester products made several different styles of jets for use in Quadrajets, 1bbl and 2bbl carburetors, each with their own unique leading and trailing profile on each side of the jet orifice. Be careful as all the various styles will physically interchange and for example, they could all have a .070" jet orifice but due to the leading and trailing profiles being different, each style will have different flow rates. Make sure that you are using correct metering jet in your carburetor by using QuadrajetParts.com jets. Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more

Part Number
2401-61
Metering Jet .062" - fits Rochester "B", "H", "2G", "4G" Carbure


Quantity: 1 jet, USA made metering jet...see more

USA made metering jet is used in Rochester carburetors. Fits:
Rochester "B" carburetors.
Rochester "H" carburetors.
Rochester "2G" or Twojet carburetors.
Rochester "4G" or Fourjet carburetors. Used to tailor air fuel ratio. Number indicates jet size and dimension of jet hole. (For example: a jet stamped 60 will have a .060" orifice) A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your carburetor can pay big dividends at the race track and/or increased fuel efficiency. Jet number is stamped into each jet. Quantity: 1 Jet IMPORTANT INFORMATION:
Jets are sold singly.
If you have a TwoJet / 2G carburetor, You need to order 2 Jets.
If you have a FourJet / 4G carburetor, You need to order 2 Jets for the primary side and two jets for the secondary side of the carburetor. Note:
These metering jets are correctly profiled and specifically made for the Rochester "B", "H", "2G" and "4G" carburetors. Rochester products made several different styles of jets for use in Quadrajets, 1bbl and 2bbl carburetors, each with their own unique leading and trailing profile on each side of the jet orifice. Be careful as all the various styles will physically interchange and for example, they could all have a .070" jet orifice but due to the leading and trailing profiles being different, each style will have different flow rates. Make sure that you are using correct metering jet in your carburetor by using QuadrajetParts.com jets. Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more

Part Number
2401-62
Metering Jet .063" - fits Rochester "B", "H", "2G", "4G" Carbure


Quantity: 1 jet, USA made metering jet...see more

USA made metering jet is used in Rochester carburetors. Fits:
Rochester "B" carburetors.
Rochester "H" carburetors.
Rochester "2G" or Twojet carburetors.
Rochester "4G" or Fourjet carburetors. Used to tailor air fuel ratio. Number indicates jet size and dimension of jet hole. (For example: a jet stamped 60 will have a .060" orifice) A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your carburetor can pay big dividends at the race track and/or increased fuel efficiency. Jet number is stamped into each jet. Quantity: 1 Jet IMPORTANT INFORMATION:
Jets are sold singly.
If you have a TwoJet / 2G carburetor, You need to order 2 Jets.
If you have a FourJet / 4G carburetor, You need to order 2 Jets for the primary side and two jets for the secondary side of the carburetor. Note:
These metering jets are correctly profiled and specifically made for the Rochester "B", "H", "2G" and "4G" carburetors. Rochester products made several different styles of jets for use in Quadrajets, 1bbl and 2bbl carburetors, each with their own unique leading and trailing profile on each side of the jet orifice. Be careful as all the various styles will physically interchange and for example, they could all have a .070" jet orifice but due to the leading and trailing profiles being different, each style will have different flow rates. Make sure that you are using correct metering jet in your carburetor by using QuadrajetParts.com jets. Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more

Part Number
2401-63
Metering Jet .064" - fits Rochester "B", "H", "2G", "4G" Carbure


Quantity: 1 jet, USA made metering jet...see more

USA made metering jet is used in Rochester carburetors. Fits:
Rochester "B" carburetors.
Rochester "H" carburetors.
Rochester "2G" or Twojet carburetors.
Rochester "4G" or Fourjet carburetors. Used to tailor air fuel ratio. Number indicates jet size and dimension of jet hole. (For example: a jet stamped 60 will have a .060" orifice) A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your carburetor can pay big dividends at the race track and/or increased fuel efficiency. Jet number is stamped into each jet. Quantity: 1 Jet IMPORTANT INFORMATION:
Jets are sold singly.
If you have a TwoJet / 2G carburetor, You need to order 2 Jets.
If you have a FourJet / 4G carburetor, You need to order 2 Jets for the primary side and two jets for the secondary side of the carburetor. Note:
These metering jets are correctly profiled and specifically made for the Rochester "B", "H", "2G" and "4G" carburetors. Rochester products made several different styles of jets for use in Quadrajets, 1bbl and 2bbl carburetors, each with their own unique leading and trailing profile on each side of the jet orifice. Be careful as all the various styles will physically interchange and for example, they could all have a .070" jet orifice but due to the leading and trailing profiles being different, each style will have different flow rates. Make sure that you are using correct metering jet in your carburetor by using QuadrajetParts.com jets. Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more

Part Number
2401-64
Metering Jet .065" - fits Rochester "B", "H", "2G", "4G" Carbure


Quantity: 1 jet, USA made metering jet...see more

USA made metering jet is used in Rochester carburetors. Fits:
Rochester "B" carburetors.
Rochester "H" carburetors.
Rochester "2G" or Twojet carburetors.
Rochester "4G" or Fourjet carburetors. Used to tailor air fuel ratio. Number indicates jet size and dimension of jet hole. (For example: a jet stamped 60 will have a .060" orifice) A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your carburetor can pay big dividends at the race track and/or increased fuel efficiency. Jet number is stamped into each jet. Quantity: 1 Jet IMPORTANT INFORMATION:
Jets are sold singly.
If you have a TwoJet / 2G carburetor, You need to order 2 Jets.
If you have a FourJet / 4G carburetor, You need to order 2 Jets for the primary side and two jets for the secondary side of the carburetor. Note:
These metering jets are correctly profiled and specifically made for the Rochester "B", "H", "2G" and "4G" carburetors. Rochester products made several different styles of jets for use in Quadrajets, 1bbl and 2bbl carburetors, each with their own unique leading and trailing profile on each side of the jet orifice. Be careful as all the various styles will physically interchange and for example, they could all have a .070" jet orifice but due to the leading and trailing profiles being different, each style will have different flow rates. Make sure that you are using correct metering jet in your carburetor by using QuadrajetParts.com jets. Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more

Part Number
2401-65
Metering Jet .066" - fits Rochester "B", "H", "2G", "4G" Carbure


Quantity: 1 jet, USA made metering jet...see more

USA made metering jet is used in Rochester carburetors. Fits:
Rochester "B" carburetors.
Rochester "H" carburetors.
Rochester "2G" or Twojet carburetors.
Rochester "4G" or Fourjet carburetors. Used to tailor air fuel ratio. Number indicates jet size and dimension of jet hole. (For example: a jet stamped 60 will have a .060" orifice) A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your carburetor can pay big dividends at the race track and/or increased fuel efficiency. Jet number is stamped into each jet. Quantity: 1 Jet IMPORTANT INFORMATION:
Jets are sold singly.
If you have a TwoJet / 2G carburetor, You need to order 2 Jets.
If you have a FourJet / 4G carburetor, You need to order 2 Jets for the primary side and two jets for the secondary side of the carburetor. Note:
These metering jets are correctly profiled and specifically made for the Rochester "B", "H", "2G" and "4G" carburetors. Rochester products made several different styles of jets for use in Quadrajets, 1bbl and 2bbl carburetors, each with their own unique leading and trailing profile on each side of the jet orifice. Be careful as all the various styles will physically interchange and for example, they could all have a .070" jet orifice but due to the leading and trailing profiles being different, each style will have different flow rates. Make sure that you are using correct metering jet in your carburetor by using QuadrajetParts.com jets. Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more

Part Number
2401-66
Metering Jet .067" - fits Rochester "B", "H", "2G", "4G" Carbure


Quantity: 1 jet, USA made metering jet...see more

USA made metering jet is used in Rochester carburetors. Fits:
Rochester "B" carburetors.
Rochester "H" carburetors.
Rochester "2G" or Twojet carburetors.
Rochester "4G" or Fourjet carburetors. Used to tailor air fuel ratio. Number indicates jet size and dimension of jet hole. (For example: a jet stamped 60 will have a .060" orifice) A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your carburetor can pay big dividends at the race track and/or increased fuel efficiency. Jet number is stamped into each jet. Quantity: 1 Jet IMPORTANT INFORMATION:
Jets are sold singly.
If you have a TwoJet / 2G carburetor, You need to order 2 Jets.
If you have a FourJet / 4G carburetor, You need to order 2 Jets for the primary side and two jets for the secondary side of the carburetor. Note:
These metering jets are correctly profiled and specifically made for the Rochester "B", "H", "2G" and "4G" carburetors. Rochester products made several different styles of jets for use in Quadrajets, 1bbl and 2bbl carburetors, each with their own unique leading and trailing profile on each side of the jet orifice. Be careful as all the various styles will physically interchange and for example, they could all have a .070" jet orifice but due to the leading and trailing profiles being different, each style will have different flow rates. Make sure that you are using correct metering jet in your carburetor by using QuadrajetParts.com jets. Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more

Part Number
2401-67
Metering Jet .068" - fits Rochester "B", "H", "2G", "4G" Carbure


Quantity: 1 jet, USA made metering jet...see more

USA made metering jet is used in Rochester carburetors. Fits:
Rochester "B" carburetors.
Rochester "H" carburetors.
Rochester "2G" or Twojet carburetors.
Rochester "4G" or Fourjet carburetors. Used to tailor air fuel ratio. Number indicates jet size and dimension of jet hole. (For example: a jet stamped 60 will have a .060" orifice) A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your carburetor can pay big dividends at the race track and/or increased fuel efficiency. Jet number is stamped into each jet. Quantity: 1 Jet IMPORTANT INFORMATION:
Jets are sold singly.
If you have a TwoJet / 2G carburetor, You need to order 2 Jets.
If you have a FourJet / 4G carburetor, You need to order 2 Jets for the primary side and two jets for the secondary side of the carburetor. Note:
These metering jets are correctly profiled and specifically made for the Rochester "B", "H", "2G" and "4G" carburetors. Rochester products made several different styles of jets for use in Quadrajets, 1bbl and 2bbl carburetors, each with their own unique leading and trailing profile on each side of the jet orifice. Be careful as all the various styles will physically interchange and for example, they could all have a .070" jet orifice but due to the leading and trailing profiles being different, each style will have different flow rates. Make sure that you are using correct metering jet in your carburetor by using QuadrajetParts.com jets. Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more

Part Number
2401-68
Metering Jet .069" - fits Rochester "B", "H", "2G", "4G" Carbure


Quantity: 1 jet, USA made metering jet...see more

USA made metering jet is used in Rochester carburetors. Fits:
Rochester "B" carburetors.
Rochester "H" carburetors.
Rochester "2G" or Twojet carburetors.
Rochester "4G" or Fourjet carburetors. Used to tailor air fuel ratio. Number indicates jet size and dimension of jet hole. (For example: a jet stamped 60 will have a .060" orifice) A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your carburetor can pay big dividends at the race track and/or increased fuel efficiency. Jet number is stamped into each jet. Quantity: 1 Jet IMPORTANT INFORMATION:
Jets are sold singly.
If you have a TwoJet / 2G carburetor, You need to order 2 Jets.
If you have a FourJet / 4G carburetor, You need to order 2 Jets for the primary side and two jets for the secondary side of the carburetor. Note:
These metering jets are correctly profiled and specifically made for the Rochester "B", "H", "2G" and "4G" carburetors. Rochester products made several different styles of jets for use in Quadrajets, 1bbl and 2bbl carburetors, each with their own unique leading and trailing profile on each side of the jet orifice. Be careful as all the various styles will physically interchange and for example, they could all have a .070" jet orifice but due to the leading and trailing profiles being different, each style will have different flow rates. Make sure that you are using correct metering jet in your carburetor by using QuadrajetParts.com jets. Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more

Part Number
2401-69
Metering Jet .070" - fits Rochester "B", "H", "2G", "4G" Carbure


Quantity: 1 jet, USA made metering jet...see more

USA made metering jet is used in Rochester carburetors. Fits:
Rochester "B" carburetors.
Rochester "H" carburetors.
Rochester "2G" or Twojet carburetors.
Rochester "4G" or Fourjet carburetors. Used to tailor air fuel ratio. Number indicates jet size and dimension of jet hole. (For example: a jet stamped 60 will have a .060" orifice) A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your carburetor can pay big dividends at the race track and/or increased fuel efficiency. Jet number is stamped into each jet. Quantity: 1 Jet IMPORTANT INFORMATION:
Jets are sold singly.
If you have a TwoJet / 2G carburetor, You need to order 2 Jets.
If you have a FourJet / 4G carburetor, You need to order 2 Jets for the primary side and two jets for the secondary side of the carburetor. Note:
These metering jets are correctly profiled and specifically made for the Rochester "B", "H", "2G" and "4G" carburetors. Rochester products made several different styles of jets for use in Quadrajets, 1bbl and 2bbl carburetors, each with their own unique leading and trailing profile on each side of the jet orifice. Be careful as all the various styles will physically interchange and for example, they could all have a .070" jet orifice but due to the leading and trailing profiles being different, each style will have different flow rates. Make sure that you are using correct metering jet in your carburetor by using QuadrajetParts.com jets. Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more

Part Number
2401-70
Metering Jet .071" - fits Rochester "B", "H", "2G", "4G" Carbure


Quantity: 1 jet, USA made metering jet...see more

USA made metering jet is used in Rochester carburetors. Fits:
Rochester "B" carburetors.
Rochester "H" carburetors.
Rochester "2G" or Twojet carburetors.
Rochester "4G" or Fourjet carburetors. Used to tailor air fuel ratio. Number indicates jet size and dimension of jet hole. (For example: a jet stamped 60 will have a .060" orifice) A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your carburetor can pay big dividends at the race track and/or increased fuel efficiency. Jet number is stamped into each jet. Quantity: 1 Jet IMPORTANT INFORMATION:
Jets are sold singly.
If you have a TwoJet / 2G carburetor, You need to order 2 Jets.
If you have a FourJet / 4G carburetor, You need to order 2 Jets for the primary side and two jets for the secondary side of the carburetor. Note:
These metering jets are correctly profiled and specifically made for the Rochester "B", "H", "2G" and "4G" carburetors. Rochester products made several different styles of jets for use in Quadrajets, 1bbl and 2bbl carburetors, each with their own unique leading and trailing profile on each side of the jet orifice. Be careful as all the various styles will physically interchange and for example, they could all have a .070" jet orifice but due to the leading and trailing profiles being different, each style will have different flow rates. Make sure that you are using correct metering jet in your carburetor by using QuadrajetParts.com jets. Note: This item is a non-returnable item. Carburetor jets are not returnable.…see more

Part Number
2401-71
Result Pages: