JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Result Pages:
Scale for Weighing Carburetor Floats


With this carburetor float scale you can check, not guess your floats weight to see if its good or bad....see more

With this carburetor float scale you can check, not guess your floats weight to see if its good or bad. Built to exacting Bureau of Standard accuracy, this carburetor float scale is calibrated in ounces and grams. Easy to use, a must for any serious Rochester QuadraJet tuner. Handy protective carrying case included. Note: Photo shows float for display purposes only, float is not included with scale. Instructions:
Attach float to clip so it hangs free.
Hold scale by loop holder so scale hangs free.
Hold steady until indicator comes to rest, indicating weight.…see more

Part Number
1420
Screws for Bowl Cover / Airhorn - 10-32 x 7/8"

Head Design: Fillister slot head
Thread size: 10-32 x 7/8"
Quantity: 10 screws Fits:
Rochester Quadrajet carburetors (airhorn screws)
Rochester 2G carburetors
Holley 2209, 2210, 2245 carburetors…see more

Part Number
4213F
Screws for Throttle Shaft - 8-32

Head Design: Tapered philips head
Overall length: .465"
Thread size: 8-32
Head diameter: .246"
Thread diameter: .160"
Quantity: 10 screws Fits:
Ford-Motorcraft 4100 carburetors (fits most 4100 models)
Holley 2300 style carburetors
Holley 4150, 4160 style carburetors
Holley 4165, 4175 carburetors
Holley 4180, 4190 carburetors…see more

Part Number
4212D
Screws for Throttle Shaft & Choke

Head Design: Tapered philips head
Overall length: .290"
Head diameter: .189"
Thread diameter: .135"
Thread size: 6-32
Quantity: 20 screws
OEM # 7002305, 7007627 Fits:
Rochester 4G carburetors - (throttle shaft & choke shaft)
Rochester 2G carburetors - (throttle shaft & choke shaft)
Rochester H, HV carburetors
Rochester B, BC, BV carburetors
Holley 1946, 6146 carburetors
Holley 740 carburetors
Holley 885 carburetors (throttle & choke screw)
Holley 1901 carburetors
Holley 2300 carburetors
Holley 4000 carburetors
Holley 4150, 4160 style carburetors
Holley 4165, 4175 style carburetors
Holley 4180, 4190 style carburetors
Holley 1 bbl carburetors
Holley 2 bbl carburetors
Ford/Motorcraft/Autolite 1100, 1101 carburetors
Ford/Motorcraft/Autolite 2100, 2150 carburetors
Ford/Motorcraft/Autolite 4100 carburetors
Ford/Motorcraft/Autolite 4300, 4350 carburetors
Stromberg WW, WWC carburetors…see more

Part Number
4212A
Screws for Throttle Shaft, Choke & Air Valves - 6-32 X 5/16"

Overall length: .400"
Quantity: 10 screws
Thread size: 6-32 X 5/16" Fits:
Rochester Quadrajet carburetors - (Choke shaft & Secondary air valve shaft screws)
Rochester 2G carburetors - (Choke shaft linkage screw)
Rochester Monojet carburetors - (Throttle shaft butterfly screw)
Holley 2300 carburetors
May fit other carburetors also.…see more

Part Number
4212C
Secondary Air Valve Adjustment Hex Key

Correctly sized hex key is used to adjust the secondary air valve spring tension on the Rochester Quadrajet Carburetor. Secondary air valve tension adjustment can be made on underside of the air horn with carburetor installed on engine, all access is on external area of carb.  Adjusting air valve tension looser will increase opening rate of scondaries.  Tighting the air valve will slow down the opening rate and can cure bogging.  Quantity: 1 hex key…see more

Part Number
4902
Secondary Air Valve Tension Spring


Rochester Quadrajet carburetor tension (windup) spring is used to provide tension to the...see more

Replacement Rochester Quadrajet carburetor tension (windup) spring is used to provide tension to the secondary air valve. Factory spring is known to break when wound too tightly. Replaces broken or weak original spring. Handy to keep a few of these springs in your tool box for when the original spring does break. Fits:
Rochester Quadrajet
Rochester Four-Jet (4G) w/ Auxiliary Throttle Valve   Quanity: 1 spring…see more

Part Number
2702
Secondary Choke Pull Off Link - Rochester Dualjet

Overall length: 2.27"
Rod diameter: 1/8"
Quantity: 1 rod
OEM # 7045092 Fits:
Rochester Dualjet carburetors.…see more

Part Number
3137K
Secondary Diaphragm Spring / Float Spring - Holley

Fits:
Holley carburetors (Primary & Secondary Float Spring)
One spring is used on each float.
Holley 4180 carburetors (Secondary Diaphragm Spring) Quantity: 1 Spring Dimensions:
Wire diameter: .013"
Outside diameters: .575" & .300"
Free Height: 1.10"…see more

Part Number
3895A
Secondary Diaphragm Spring Kit - Holley, (Seven Springs)

Fits:
Holley 4010 carburetors.
Holley 4150 carburetors w/ vacuum activated secondary.
Holley 4160 carburetors w/ vacuum activated secondary. Spring kit allows tuning of secondary opening rate.
Quantity: 7 springs Vacuum secondary spring rates:
----Weakest----
White
Yellow (Short)
Yellow
Purple
Plain
Brown
Black
----Strongest----…see more

Part Number
1074
Secondary Float Spring - Holley

Fits:
Holley carburetors w/side hung float (Secondary Float Spring)
One spring is used on each float. Quantity: 1 Spring Dimensions:
Wire diameter: .018"
Outside diameters: .570" & .320"
Free Height: 1.10" Secondary Float Spring - Holley…see more

Part Number
3895G
Secondary Main Well Bleed Tubes, .042" orifice x 1-27/32 L"


Quanity: 2 Tubes, These tubes are pressed into the underside of the airhorn....see more

Secondary Main Well Bleed Tube
These tubes are pressed into the underside of the airhorn. Note:
The original tube OD was .093", the replacement tube OD is .100". It will be neccesary to drill your airhorn to .098"(#40 drill), this will allow for a tight fit of new tubes. .042" diameter orifice x 1-27/32" length Quanity: 2 Tubes…see more

Part Number
4801
Secondary Metering Well "Super Gasket"


"Super gasket" applies pressure to secondary metering well plugs to prevent fuel leakage....see more

"Super gasket" applies pressure to secondary metering well plugs to prevent fuel leakage. Easy to install.…see more

Part Number
1741
Secondary Metering Well Plugs, 7/16" O-ringed plug

O-ring plug effectively seals the secondary metering wells, preventing fuel leakage. Fits early model Q-Jets. Plug diameter is approx. 7/16". Works great, eliminates fuel bowl drainage allowing for easier cold startups. A permanent fix to an old Quadrajet problem.
Quantity: 2 plugs
MADE IN THE USA Fits:
All* 1965, 1966, 1967 and some 1968 and one or two 1969 Rochester Quadrajets with brass cup plugs.
* Note: Service replacement carburetors may require the later/smaller plug #1743, even though the carburetor number indicates a 1965-67 model year. the actual production year may be different. Most Rochester Quadrajet carburetors used a four-number Julian date(DDDY). For example: Carb# 7037218, Plant code: BD, Julian date: 3431 was manufactured on the 343rd day of 1971. Note:
 Instructions to install secondary well plugs are located in the Quadrajet Tech Article section.
Q1742 Q: How does the O-ring plug work with today's ethanol enhanced fuels?
A: We have used this plug in our own vehicles for 6+ years and have not had any issues at all. Not sure if the o-ring is made from ethanol resistant material, but it has not caused any problems in this type of static application. Q: Can the plugs fall out during use?
A: No, cone shaped nipple on back of plug takes up clearance to throttle body ensuring the plugs can not fall out. …see more

Part Number
1742
Secondary Pickup Tube-  Rochester Varajet

Fits:
Rochester Varajet carburetors Dimensions:
Tube diameter: .187" (3/16")
Flattened tube size: .210" x .160"
Over-all length" 1.990"
Quantity: 1 tube…see more

Part Number
Q4825F
Secondary Pickup Tubes, 1/8" OD x 1-7/16" L


Quantity: 2 Tubes, Tubes are pressed into Air Horn casting....see more

Tubes are pressed into Air Horn casting. Tubes transfer fuel from secondary wells for use as a secondary air valve accelerator "pump". Direct replacement of original tubes. Quantity: 2 Tubes…see more

Part Number
4811
Secondary Throttle Link Rod - Holley

Secondary throttle link fits:
Holley 3160, 4150, 4160 carburetors Specifications:
Overall length is 2.17"
Rod diameter: .125"
Quantity: 1 rod The following retainer is recommended to be used with this rod:
#4252I (Not included, must be purchased separately)…see more

Part Number
3145M
Secondary Throttle Rod


Retainer clip Q4257 is included as part of (Q3170) secondary throttle rod....see more

Secondary Throttle Rod, Gold Anodized. This style linkage was used on early Quadrajets and features quick and easy installation and removal, can be used on all year Quadrajets.
Quantity: 1 rod and 1 retainer (4257)
Note: Retainer clip 4257 is included as part of (3170) secondary throttle rod.…see more

Part Number
3170
Secondary Vacuum Brake Rod, fits 1979 & up GM (#3056)


Replaces OEM linkage # 17062369...see more

Vacuum break linkage used to connect the primary vacuum break to the secondary air valve.
Overall length is 2.4"
Quantity: 1 rod Replaces OEM linkage # 17062369 This linkage rod fits the following carburetor numbers:
17080201, 17080205, 17080206, 17080224, 17080226, 17080227, 17080290, 17080291, 17080292, 17080295, 17080298, 17080503, 17080506, 17080508, 17080523, 17080524, 17080525, 17080526, 17080527, 17080528, 17086434
May fit other applications.…see more

Part Number
3056
Secondary Vacuum Break Link-  Rochester 2SE

Overall length: 3.15"
Rod diameter: 1/8"
Quantity: 1 rod
OEM # 17063895 Fits:
Rochester Varajet 2SE carburetors.
1979 Chevrolet w/250" eng, 1980 Oldsmobile w/171", 173" engs. Note:
Requires retainer clip 4262. (not included)…see more

Part Number
3137E
Self Locking Retainer

Self Locking Retainer Hole ID: .495"
Overall OD including tabs: .755"
Thickness: .014"
Qty: 1…see more

Part Number
1030B
Service- Fuel Inlet Thread Repair, Heli-Coil Installation, 1" In


QuadrajetParts.com will install a Heli-Coil Thread Insert on your Rochester Quadrajet Carburetor with 1" diameter fuel inlet. This will restore your stripped out...see more

QuadrajetParts.com will install a Heli-Coil Thread Insert on your Rochester Quadrajet Carburetor with 1" diameter fuel inlet. This will restore your stripped out inlet threads, allowing the use of your original inlet fitting. The absolute best solution to stripped or worn carburetor inlet threads. Quadrajet carburetor note:
1" inlet fittings are found on all 1972 and later automobile and truck Quadrajet carburetors. We do not tap inlet threads by hand at QuadrajetParts.com. All Heli-Coil thread inserts are machined on our milling machine. QuadrajetParts.com has built a dedicated Quadrajet mounting fixture on our DRO milling machine to insure the installed inlet threads are concentric to the sealing gasket surface. The installation process for the larger 1" inlet threads is more labor intensive and requires custom tooling, but the result will allow the original style inlet fitting and seal to properly work. After installation, every thread insert repair is pressure checked to verify a leak free installation. Normal turnaround time is 2-3 days. If you require any packages to be insured for more than the invoiced charge amount, please contact us and request that additional insurance be purchased for your package. Customer Instructions:
After ordering a QuadrajetParts.com service. Ensure that ALL gasoline is drained and evaporated from casting. Wrap up your carburetor main body with lots of packing material to protect the fragile casting. Ship your Rochester Quadrajet Carburetor main body and a copy of your online order receipt to:
QuadrajetParts.com
36 Mount Pleasant Road
Columbia, NJ 07832 Please note that not all main bodies can be repaired and we cannot guarantee a successful installation as some main body inlet threads are just too damaged to allow a successful repair. NOTE: Send only your bare main body casting (Remove base plate, air horn and all internal components).
Complete carburetors sent will be charged an additional $20.00 for disassembly. If you request the carburetor to be re-assembled, there will be an additional $30.00 charge. Note re-assembly does not mean rebuilding or adjusting float levels ect. Complete carburetors (due to the increased weight) will be charged an additional shipping surcharge to cover added shipping expense.…see more

Part Number
9022
Service- Fuel Inlet Thread Repair, Heli-Coil Installation, 7/8"-


QuadrajetParts.com will install a Heli-Coil Thread Insert on your Carburetor with 7/8"-20 (7/8" diameter and 20 threads per inch) fuel inlet. This will restore your...see more

QuadrajetParts.com will install a Heli-Coil Thread Insert on your Carburetor with 7/8"-20 (7/8" diameter and 20 threads per inch) fuel inlet and reface the carburetors inlet gasket surface to ensure a leak free repair. This will restore your stripped out inlet threads, allowing the use of your original inlet fitting. The absolute best solution to stripped or worn carburetor inlet threads. 7/8"-20 Inserts are installed on: Rochester Quadrajet Carburetors, all 1965 thru 1971 automobile and truck Quadrajet carburetors, plus all year marine Quadrajet carburetors. Rochester Four Jet (4G) Carburetors Rochester Two Jet (2G) Carburetors Rochester Model "B" Carburetors We do not tap inlet threads by hand at QuadrajetParts.com. All fuel inlet Heli-Coil thread inserts are machined on our milling machine. QuadrajetParts.com has built dedicated Rochester mounting fixtures on our DRO milling machine to insure the installed inlet threads and sealing gasket surface is concentric. After installation, every thread insert repair is pressure checked to verify a leak free installation. Normal turnaround time is 2-3 days. If you require any packages to be insured for more than the invoiced charge amount, please contact us and request that additional insurance be purchased for your package. Customer Instructions:
1. Ensure that ALL gasoline is drained and evaporated from casting.
2. Send only the casting that includes inlet threads, do not send other components (for example airhorn and throttle body) depending on carburetor model. Remove all removable components such as choke thermostat housing, jets, needle & seat, etc. Choke shaft/flap and 2G/4G power piston may remain.)
3. Wrap up your carburetor main body (Q-Jets) or bowl cover (4G, 2G & Model B) with lots of packing material to protect the fragile casting. Ship your Rochester Carburetor casting with a copy of your online order receipt to:
QuadrajetParts.com
36 Mount Pleasant Road
Columbia, NJ 07832 Please note:
Not all carburetor inlets can be repaired and we cannot guarantee a successful installation as some castings inlet threads are just too damaged to allow a successful repair.
Complete carburetors sent will be charged an additional $20.00 for disassembly. If you request the carburetor to be re-assembled, there will be an additional $30.00 charge. Note re-assembly does not mean rebuilding or adjusting float levels etc. Complete carburetors (due to the increased weight) will be charged an additional shipping surcharge to cover added shipping expense. NOTE: All 7/8" inlet Rochester carburetors use a gasket on the outside of the threads (Directly below hex area on inlet fitting to make an effective seal) If your carburetor main body has had a hole drilled thru the fuel inlet threaded area, an additional repair ($47.50) will be required to seal the hole with an aluminum plug.…see more

Part Number
9021
Service- Fuel Inlet Thread Repair, Heli-Coil Installation, 7/8"-

We will install a Heli-Coil Thread Insert on your Carburetor with 7/8"-20 (7/8" diameter and 20 threads per inch) fuel inlet and reface the carburetors inlet gasket surface to ensure a leak free repair. This will restore your stripped out inlet threads, allowing the use of your original inlet fitting. The absolute best solution to stripped or worn carburetor inlet threads. Inserts are installed on:
Holley Carburetors w/ 7/8-20 threads. We do not tap inlet threads by hand at QuadrajetParts.com. All fuel inlet Heli-Coil thread inserts are machined on our milling machine. QuadrajetParts.com has built dedicated mounting fixtures on our DRO milling machine to insure the installed inlet threads and sealing gasket surface is concentric. After installation, every thread insert repair is pressure checked to verify a leak free installation. Normal turnaround time is 2-3 days. If you require any packages to be insured for more than the invoiced charge amount, please contact us and request that additional insurance be purchased for your package. Customer Instructions:
1. Ensure that ALL gasoline is drained and evaporated from casting.
2. Send only the casting that includes inlet threads, do not send other components (for example airhorn and throttle body) depending on carburetor model. Remove all removable components such as choke thermostat housing, jets, needle & seat, etc.
3. Wrap up your carburetor bowl with lots of packing material to protect the fragile casting. Ship your Carburetor casting with a copy of your online order receipt to:
QuadrajetParts.com
36 Mount Pleasant Road
Columbia, NJ 07832 Please note:
Not all carburetor inlets can be repaired and we cannot guarantee a successful installation as some castings inlet threads are just too damaged to allow a successful repair.
Complete carburetors sent will be charged an additional $20.00 for disassembly. If you request the carburetor to be re-assembled, there will be an additional $30.00 charge. Note re-assembly does not mean rebuilding or adjusting float levels etc. Complete carburetors (due to the increased weight) will be charged an additional shipping surcharge to cover added shipping expense.…see more

Part Number
9022B
Service- Fuel Inlet Thread Restoration, Heli-Coil Installation,

QuadrajetParts.com will install a Heli-Coil Thread Insert on your 5/8"-20 inlet 4G / Four Jet Carburetor. 5/8"-20 Inserts are installed on: Rochester Four Jet (4G) Carburetors We do not tap inlet threads by hand at QuadrajetParts.com. All fuel inlet Heli-Coil thread inserts are machined on our milling machine. QuadrajetParts.com has built dedicated mounting fixtures on our DRO milling machine to insure the installed inlet threads and sealing gasket surface is concentric. After installation, every thread insert repair is pressure checked to verify a leak free installation. Normal turnaround time is 2-3 days. Customer Instructions:
After ordering a QuadrajetParts.com service. Ensure that ALL gasoline is drained and evaporated from casting. Wrap up your carburetor bowl cover with lots of packing material to protect the fragile casting. Ship your Rochester Carburetor casting and a copy of your online order receipt to:
QuadrajetParts.com
36 Mount Pleasant Road
Columbia, NJ 07832 Please note that not all carburetor inlets can be repaired and we cannot guarantee a successful installation as some castings inlet threads are just too damaged to allow a successful repair. NOTE: Send only the carburetor casting that contains the fuel inlet threads and remove all internal/attached components. Complete carburetors sent will be charged an additional $20.00 for dis-assembly. NOTE: All 5/8" inlet Rochester carburetors use a gasket on the outside of the threads (Directly below hex area on inlet fitting to make an effective seal) If your carburetor has a hole drilled thru the fuel inlet threaded area, an additional (extra cost) repair will be required to seal the hole with an aluminum plug. For Rochester 4G carburetors.…see more

Part Number
9022A
Service- Installation of Primary Throttle Shaft Bushings


No more vacuum leaks and all the associated problems that they can cause....see more

QuadrajetParts.com will install Primary Throttle Shaft Bushings in your Rochester Quadrajet Carburetor.
Most Rochester Quadrajets have loose and sloppy primary throttle shaft bores, resulting in a poor idle and drivability issues. We bore out your original primary throttle shaft bores to accept our oil impregnated bronze bushing, restoring the primary throttle shaft clearances, making your throttle base plate better than new. Your original primary throttle blades are reinstalled with new screws and your linkage is re-attached for easy installation to the carburetor by the customer. No more vacuum leaks and all the associated problems that they can cause. Fast turn around time! If you require any packages to be insured for more than the invoiced charge amount, please contact us and request that additional insurance be purchased for your package. Customer Instructions:
After ordering a QuadrajetParts.com service, you need to ship your Rochester Quadrajet Throttle Body (base plate) to:
QuadrajetParts.com
36 Mount Pleasant Road
Columbia, NJ 07832 NOTE: Send only your base/throttle plate casting. (Remove main body & air horn) Complete carburetors sent will be charged an additional $10.00 for disassembly.…see more

Part Number
9001
Service- Installation of Rochester Monojet Throttle Shaft Bushin

QuadrajetParts.com will install Throttle Shaft Bushings in your Rochester Monojet Carburetor.
Many Monojet have loose and sloppy throttle shaft bores, resulting in a poor idle and drivability issues. We bore out your original primary throttle shaft bores to accept our oil impregnated bronze bushing, restoring the throttle shaft clearances. Your original throttle blades are reinstalled with new screws. No more vacuum leaks and all the associated problems that they can cause. Fast turn around time! If you require any packages to be insured for more than the invoiced charge amount, please contact us and request that additional insurance be purchased for your package. Customer Instructions:
After ordering a QuadrajetParts.com service, you need to ship your Rochester Monojet Throttle Body (base plate) to:
QuadrajetParts.com
36 Mount Pleasant Road
Columbia, NJ 07832 NOTE: Send only your base/throttle plate casting. (Remove main body) Complete carburetors sent will be charged an additional $10.00 for disassembly.…see more

Part Number
9001M
Service- Installation of Secondary Throttle Shaft Bushings

QuadrajetParts.com can install Secondary Throttle Shaft Bushings in your Rochester Quadrajet Carburetor. We bore out your original secondary throttle shaft bores to accept our oil impregnated bronze bushing, restoring the throttle shaft clearences. Your original secondary throttle bades are reinstalled with new screws and your linkage is re-attached for easy installation to the carburetor by the customer. No more vacuum leaks and all the associated problems that they can cause. Fast turn around time! If you require any packages to be insured for more than the invoiced charge amount, please contact us and request that additional insurance be purchased for your package. Customer Instructions:
After ordering a QuadrajetParts.com service, you need to ship your Rochester Quadrajet Throttle Body (base plate) to:
QuadrajetParts.com
36 Mount Pleasant Road
Columbia, NJ 07832 NOTE: Send only your base/throttle plate casting. (Remove main body & air horn) Complete carburetors sent will be charged an additional $10.00 for disassembly.…see more

Part Number
9001S
Shaped Tee Vacuum Connector, bent tube 3/16" x 1/4" x  1/4"


Tee Shaped Vacuum Connector...see more

Tube, Tee Shaped Vacuum Connector (bent tube 3/16" x 1/4" x 1/4")…see more

Part Number
4816
Short Marine Carburetor Fuel Filter, low restriction


Originally used on Rochester Marine carburetors. Great low restriction mesh filter for all performance applications....see more

Originally used on Rochester Marine carburetors. Great low restriction mesh filter for all performance applications. Fits:
Rochester Quadrajet Carburetors
Rochester 2G Carburetors
Rochester B, BV, BC Carburetors Dimensions:
Length: 0.885"
Diameter: 0.650" Suggested Parts:
We recommend installing a new fuel filter spring to replace a weak or missing spring. The spring is installed in the carburetor body first then the filter goes in next with the filter opening facing away from the carburetor. The fuel filter will not work with a missing or weak spring.:
#2261 Fuel Filter Spring 
Also be sure to install a new Inlet Fitting Gasket:
For Rochester carburetors with 7/8" inlet threads use #2231B 
For Rochester carburetors with 1" inlet threads use #2232 …see more

Part Number
2254
Short Mercury Marine Carburetor Fuel Filter


Originally used on Rochester Marine carburetors....see more

Originally used on Rochester Marine carburetors. Fits:
Rochester Quadrajet
Rochester 2G Carburetors MERCURY MARINE # 35-53336, 3302-9033
OMC # 908034
VOLVO PENTA # 835576-0 Dimensions:
Length: 1.140" (1-1/8")
Diameter: 0.730" (3/4") Suggested Parts:
We recommend installing a new fuel filter spring to replace a weak or missing spring. The spring is installed in the carburetor body first then the filter goes in next with the filter opening facing away from the carburetor. The fuel filter will not work with a missing or weak spring.:
#2261 Fuel Filter Spring 
Also be sure to install a new Inlet Fitting Gasket:
For Rochester carburetors with 7/8" inlet threads use #2231B 
For Rochester carburetors with 1" inlet threads use #2232 …see more

Part Number
2254A
Short Paper Carburetor Fuel Filter


Replaces: Rochester OEM # GF-427, MERCURY MARINE # 1397-2150, OMC # 910139, 983870, 17068453...see more

Stock replacement Rochester paper fuel filter element is located in carburetors fuel inlet housing. Replaces:
Rochester OEM # GF-427
Carter OEM # 30-160
MERCURY MARINE # 1397-2150
OMC # 910139, 983870, 17068453 Fits:
Rochester Quadrajet
Rochester 2G Carburetors
Holley carburetors Dimensions:
Length: 1.00"
Diameter: 0.695" Suggested Parts:
We recommend installing a new fuel filter spring to replace a weak or missing spring. The spring is installed in the carburetor body first then the filter goes in next with the filter opening facing away from the carburetor. The fuel filter will not work with a missing or weak spring.:
#2261 Fuel Filter Spring 
Also be sure to install a new Inlet Fitting Gasket:
For Rochester carburetors with 7/8" inlet threads use #2231B 
For Rochester carburetors with 1" inlet threads use #2232  This fuel filter fits the following carburetor numbers:
7027032, 7027036, 7027081, 7027083, 7027088, 7027130, 7027132, 7027135, 7027146, 7027148, 7027149, 7027153, 7027156, 7027157, 7027210, 7027211, 7027212, 7027213, 7027216, 7027218, 7027240, 7027241, 7027244, 7027246, 7027248, 7028207, 7028208, 7028209, 7028210, 7028211, 7028212, 7028213, 7028216, 7028217, 7028218, 7028219, 7028229, 7028260, 7028261, 7028262, 7028263, 7028264, 7028265, 7028266, 7028267, 7028268, 7028269, 7028270, 7028271, 7028273, 7028274, 7028275, 7028276, 7028277, 7028280, 7028282, 7028288, 7029215, 7029223, 7029224, 7029260, 7029261, 7029262, 7029263, 7029268, 7029270, 7029273, 7029280, 7029285, 7037083, 7037210, 7037211, 7037212, 7037213, 7037216, 7037218, 7040204, 7040205, 7040206, 7040207, 7040208, 7040213, 7040221, 7040262, 7040263, 7040264, 7040267, 7040268, 7040270, 7040273, 7040283, 7040284, 7040500, 7040501, 7040502, 7040503, 7040504, 7040505, 7040507, 7040509, 7040511, 7040513, 7040521, 7040562, 7040563, 7040564, 7040567, 7040568, 7040570, 7040573, 7041200, 7041201, 7041202, 7041203, 7041204, 7041205, 7041206, 7041208, 7041209, 7041211, 7041212, 7041213, 7041262, 7041263, 7041264, 7041267, 7041268, 7041270, 7041273, 7041305, 7041306, 7042202, 7042203, 7042206, 7042207, 7042208, 7042210, 7042211, 7042215, 7042216, 7042217, 7042218, 7042219, 7042220, 7042262, 7042263, 7042264, 7042270, 7042272, 7042273, 7042274, 7042276, 7042278, 7042902, 7042903, 7042910, 7042911, 7043200, 7043201, 7043202, 7043203, 7043207, 7043208, 7043210, 7043211, 7043212, 7043213, 7043215, 7043216, 7043262, 7043263, 7043264, 7043265, 7043266, 7043270, 7043272, 7043273, 7043274, 7043507, 7044201, 7044202, 7044203, 7044206, 7044207, 7044208, 7044209, 7044210, 7044211, 7044212, 7044213, 7044214, 7044215, 7044216, 7044217, 7044218, 7044219, 7044221, 7044223, 7044224, 7044225, 7044226, 7044227, 7044262, 7044266, 7044267, 7044268, 7044269, 7044270, 7044272, 7044273, 7044274, 7044500, 7044502, 7044503, 7044505, 7044506, 7044507, 7044512, 7044513, 7044514, 7044515, 7044516, 7044517, 7044518, 7044519, 7044520, 7044526, 7044527, 7044560, 7044568, 7045212, 7045213, 7045214, 7045215, 7045216, 7045217, 7045225, 7045229, 7045583, 7045584, 7045585, 7045586, 7045588, 7045589, 17054905, 17054906, 17054907, 17054908, 17054909, 17054910, 17054911, 17054912, 17054913, 17054947, 17054948, 17057213, 17057215, 17057216, 17057229, 17057514, 17057525, 17057529
May fit other applications.…see more

Part Number
2251
Short Paper Carburetor Fuel Filter with check valve

Stock replacement paper fuel filter element is located in carburetors fuel inlet housing. Built in check valve prevents fuel from draining back out of carburetor when engine is turned off. Note:
Check valve filters do offer more restriction to high RPM fuel flow than non-check valve filters. For performance applications we recommend 2251 (No Check Valve Filter) or if you really want the check valve with higher fuel flow, you can pull out the check valve from the filter end and carefully pull bottom end of spring out of check valve and snipe a few coils off end of spring, then push end of spring back into the valve.
Replaces:
Rochester OEM # GF-470

Edelbrock # 1926 Fits:
Rochester Quadrajet Carburetors
Rochester 2G Carburetors
Holley carburetors Dimensions:
Length: 1.00"
Diameter: 0.695" Suggested Parts:
We recommend installing a new fuel filter spring to replace a weak or missing spring. The spring is installed in the carburetor body first then the filter goes in next with the filter opening facing away from the carburetor. The fuel filter will not work with a missing or weak spring.:
#2261 Fuel Filter Spring 
Also be sure to install a new Inlet Fitting Gasket:
For Rochester carburetors with 7/8" inlet threads use #2231B 
For Rochester carburetors with 1" inlet threads use #2232  This fuel filter fits the following carburetor numbers:
1901, 1902, 17058213, 17058215, 17058229, 17058513, 17058514, 17058515, 17058525, 17058529
May fit other applications.…see more

Part Number
2251CV
Sintered Bronze Carburetor Fuel Filter


Stock replacement sintered bronze style fuel filter element is located in carburetors fuel inlet housing. Replaces Rochester OEM # 7013404...see more

Stock replacement sintered bronze style fuel filter element is located in carburetors fuel inlet housing. Replaces Rochester OEM # 7013404
Replaces Carter OEM # 30-87 Fits:
Rochester Quadrajet Carburetors
Rochester Twojet (2G) Carburetors
Rochester Fourjet (4G) Carburetors
Rochester B Carburetors
Rochester H Carburetors
Rochester Monojet Carburetors
Rochester Dualjet Carburetors
Rochester Varajet Carburetors
Carter AFB AVS Carburetors
Carter YF, YFA Carburetors
Carter WCFB Carburetors
Holley carburetors Suggested Parts:
We recommend installing a new fuel filter spring to replace a weak or missing spring. The spring is installed in the carburetor body first then the filter goes in next with the inside of the tapered cone facing in, towards the carburetor. The fuel filter will not work with a missing or weak spring.
#2261 Fuel Filter Spring 
Also be sure to install a new Inlet Fitting Gasket:
For Rochester carburetors with 7/8" inlet threads use #2231B 
For Rochester carburetors with 1" inlet threads use #2232  This filter fits the following carburetor numbers:
7025200, 7025201, 7025220, 7025221, 7026200, 7026201, 7026202, 7026203, 7026204, 7026205, 7026210, 7026240, 7026242, 7026250, 7026254, 7026255, 7026256, 7027085, 7027200, 7027201, 7027202, 7027203, 7027260, 7027261, 7027262, 7027263, 7027268, 7027269, 7027272, 7027273, 7036200, 7036201, 7036202, 7036203, 7036204, 7036205, 7036210, 7036240, 7036242, 7036250, 7036254, 7037081, 7037200, 7037201, 7037202, 7037203, 7037260, 7037261, 7037262, 7037263, 7037268, 7037269, 7037271, 7037272, 7037273, 7037276, 7040307, 7041304, 7041308, 7041309, 7041310, 7041311, 7041312, 7041313
May fit other applications. Note: Use fuel filter gasket 2233I with this filter (Gasket not included with filter) Dimensions:
Length: 0.750"
Diameter: 0.650"
Q2252…see more

Part Number
2252
Slashed 45 Degree Vent Tube, 3/8" OD x 1" L


Used on larger CFM Quadrajets. Vent tube is installed in top of airhorn casting....see more

45 Degree slashed vent tube is used on larger CFM Quadrajets. Vent tube is installed in top of airhorn casting.
3/8" OD x 1" L Quantity: 1 tube…see more

Part Number
4814
Slotted Brass Tube - Ford .19" OD x 1.4" Length

Dimensions:
Tube outside diameter: .19"
Over-all length: 1.4" Fits:
Ford/Motorcraft 2100, 2150 carburetors
Ford/Motorcraft 4100 carburetors
Ford/Motorcraft 4300, 4350 carburetors
Holley 2300, 2380 carburetors
Rochester 4G (Fourjet) carburetors
May fit other applications also. Quantity: 1 Tube…see more

Part Number
4828H
Slotted Metal Tube .312" OD x 2.75" Length

Dimensions:
Overall length: 2.75"
Length of slot: Approx. .330"
Tube OD: .312"
Tube ID's: .240"
Metal tube. Fits:
Carter Thermo-Quad carburetors Quantity: 1…see more

Part Number
4827F
Small Bore Base Gasket, Rochester 2G - .031", OEM # 3988778, 397


Base gasket fits between 2G carburetor and intake...see more

Base gasket fits between 2G carburetor and intake manifold. Quantity: 1 Gasket
Gasket thickness: .031"
fits Small Bore Rochester 2G Carburetors…see more

Part Number
1721SG
Small Bore Base Gasket, Rochester 2G - .062", GM 1961-65


Base gasket fits between 2G carburetor and intake...see more

Base gasket fits between 2G carburetor and intake manifold. Quantity: 1 Gasket
Gasket thickness: .062"
fits Small Bore Rochester 2G Carburetors Originally used on the following applications :
Buick 1961-65
Checker 1963
Oldsmobile 1961-63
Pontiac 1961
May also fit other applications. Originally used on the following Rochester carburetor numbers :
7016112, 7016238, 7016280, 7016305, 7016307, 7019090, 7019092, 7019093, 7019095, 7019860, 7019863, 7020051, 7020053, 7020057, 7020059, 7020140, 7020141, 7020142, 7020143, 7020146, 7020147, 7020957, 7020959, 7020980, 7020981, 7020982, 7020983, 7023047, 7023048, 7023049, 7023056, 7023058, 7023082, 7023086, 7023096, 7023142, 7024046, 7024047, 7025046, 7025047, 7025403, 7025404, 7032988, 17052517, 17052525
May also fit other carburetor numbers.…see more

Part Number
1721SD
Small Bore Base Gasket, Rochester 2G - .062", OEM # 1380668, 136


Base gasket fits between 2G carburetor and intake...see more

Base gasket fits between 2G carburetor and intake manifold. Quantity: 1 Gasket
Gasket thickness: .062"
fits Small Bore Rochester 2G Carburetors…see more

Part Number
1721SE
Result Pages: