Carburetor Retainers
Cotter Pins - 3/64", package of 10
Dimensions-
Over-all length: .600"
Thickness: .017"
Pin diameter: .047" (3/64")
Quantity: 10 cotter pins
Fits:
Holley carburetors
Rochester Fourjet (4G) carburetors…see more
- Part Number
- 4252G
Retainer - C-Clip - .156", 5/32", package of 10
Retainer Dimensions-
C-Clip size: 5/32"
Thickness: .015"
O.D.: .204"
Quantity: 10 retainers
Note:
Steel external C-clips. These clips fit into a…see more
- Part Number
- 4254D
Retainer - C-Clip - .234", 15/64", package of 10
Retainer Dimensions-
C-Clip size: 15/64"
Thickness: .024"
O.D.: .310"
Quantity: 10 retainers
Note:
Steel external C-clips. These clips fit into a…see more
- Part Number
- 4254B
Retainer - C-Clip - .375", 3/8", package of 10
Retainer Dimensions-
C-Clip size: 3/8"
Thickness: .031"
O.D.: .493"
I.D.: .340"
Quantity: 10 retainers
Note:
Steel external C-clips. These clips fit into a groove on a…see more
- Part Number
- 4254A
Retainer - C-Clip - .375", 3/8", package of 10
Retainer Dimensions-
C-Clip size: 3/8"
Thickness: .024"
O.D.: .448"
Quantity: 10 retainers
Note:
Steel external C-clips. These clips fit into a…see more
- Part Number
- 4254C
Retainer - E-Clip - .093", 3/32", package of 10
Retainer Dimensions-
E-Clip size: 3/32"
Thickness: .015"
O.D.: .187"
Throat Opening: .060"
Quantity: 10 retainers
Note:
E-clip sizes refer to diameter…see more
- Part Number
- 4251A
Retainer - E-Clip - .109", 7/64", package of 10
Retainer Dimensions-
E-Clip size: 7/64"
Thickness: .015"
O.D.: .220"
Throat Opening: .075"
Quantity: 10 retainers
Note:
E-clip sizes refer to diameter…see more
- Part Number
- 4251H
Retainer - E-Clip - .125", 1/8", package of 10
Retainer Dimensions-
E-Clip size: 1/8"
Thickness: .017"
O.D.: .230"
Throat Opening: .090"
Quantity: 10 retainers
Note:
E-clip sizes refer to diameter…see more
- Part Number
- 4251
Retainer - E-Clip - .156", 5/32", package of 10
Retainer Dimensions-
E-Clip size: 5/32"
Thickness: .025"
O.D.: .280"
Throat Opening: .102"
Quantity: 10 retainers
Note:
E-clip sizes refer to diameter…see more
- Part Number
- 4251J
Retainer - E-Clip - .156", 5/32", package of 10
Retainer Dimensions-
E-Clip size: 5/32"
Thickness: .025"
O.D.: .375"
Throat Opening: .102"
Quantity: 10 retainers
Note:
E-clip sizes refer to diameter…see more
- Part Number
- 4251I
Retainer - E-Clip - .187", 3/16", package of 10
Retainer Dimensions-
E-Clip size: 3/16"
Thickness: .025"
O.D.: .335"
Throat Opening: .125"
Quantity: 10 retainers
Note:
E-clip sizes refer to diameter…see more
- Part Number
- 4251F
Retainer - E-Clip - .219", 7/32", package of 10
Retainer Dimensions-
E-Clip size: 7/32"
Thickness: .025"
O.D.: .435"
Throat Opening: .160"
Quantity: 10 retainers
Note:
E-clip sizes refer to diameter…see more
- Part Number
- 4251G
Retainer - E-Clip - .375", 3/8", package of 10
Retainer Dimensions-
E-Clip size: 3/8"
Thickness: .034"
O.D.: .660"
Throat Opening: .265"
Quantity: 10 retainers
Note:
E-clip sizes refer to diameter…see more
- Part Number
- 4251E
Retainer (LH) Rod Clip (OEM #7003242)
Special clip used to retain carburetor 5/32" rod linkage. Direct replacement for original retainer.
Quantity: 1 Retainer.
Hole ID is :…see more
- Part Number
- 4257
Retainer (RH) Rod Clip - fits 9/64" rods
Fits:
Rochester Fourjet carburetors
Rochester B, BC, BV carburetors
Special clip used to retain carburetor 9/64" rod linkage. Direct replacement for…see more
- Part Number
- 4258A
Retainer (RH) Rod Clip (OEM #7003137)
Clip used to retain carburetor 5/32" rod linkage...see more
Special clip used to retain carburetor 5/32" rod linkage. Direct replacement for original retainer.
Package of 1 retainer.
Hole ID is…see more
- Part Number
- 4258
Retainer for Link Rods - Quantity: 5
OEM# 17058193...see more
Retainer (Rod), OEM# 17058193
Quantity: 5 retainers
Retainer OD: .375"
Retainer ID: .105"
Fits:
GM Varajet
Ford 4100 carburetor, Secondary diaphragm…see more
- Part Number
- 4262
Retainer Pin, package of 10
Retainer Dimensions- Wire thickness: .025"...see more
Retainer pin is used on many carbs to hold various rods and linkages. Always handy to have several on hand,…see more
- Part Number
- 4252
Retainer Pin, package of 10
Retainer Dimensions-
Wire thickness: .025"
ID: .150"
Length: .475"
Quantity: 10
Retainer pin is used on many carbs to hold various…see more
- Part Number
- 4252F
Retainer, Rod Clip- OEM # 375882-S
Retainer clip is used on many carbs to hold various rods and linkages. Always handy to have several on hand,…see more
- Part Number
- 4261D
Retainer, Rod-Clip, package of 10 (OEM # 7005032)
Rod-Clip Retainers are used on many carbs to hold various rods and linkages. Retainer is installed over linkage rod and…see more
- Part Number
- 4253
Retainer, Rod-Clip, package of 10 (OEM # 7005109)
Rod-Clip Retainers are used on many carbs to hold various rods and linkages. Retainer is installed over linkage rod and…see more
- Part Number
- 4254
Retaining Clip for Throttle Cable
Rochester OEM# 10035905, 1247872...see more
Special clip used to retain throttle linkage on several Rochester models. Direct replacement for original retainer. Package of 1. Rochester OEM# 10035905,…see more
- Part Number
- 4255
Retaining Clips, package of 5
Special clip used to retain throttle linkage on several Q-Jet models...see more
Special clip used to retain throttle linkage on several Q-Jet models. Direct replacement for original retainer. Package of 5 clips. Retainer Dimensions-…see more
- Part Number
- 4256
Retaining Clips, package of 5
Special clip used to retain throttle linkage...see more
Special clip used to retain throttle linkage on several Q-Jet models. Direct replacement for original retainer. Package of 5 clips. Retainer Dimensions-…see more
- Part Number
- 4259
Rod End Clip Retainer
Hole ID: .160"...see more
Rod End Clip Retainer
Hole ID: .160"
Qty: 1…see more
- Part Number
- 4261B
Rod End Retainer - 1/8"
Retainer fits 1/8" rods
Quantity: 5 retainers
Fits:
Ford/Motorcraft 1100 carburetors
Ford/Motorcraft 1101 carburetors
Ford/Motorcraft 2100 carburetors
Ford/Motorcraft 2150 carburetors
Ford/Motorcraft…see more
- Part Number
- 4261E
Rod Retainers
Package of 10 Rod retainers....see more
Rod Retainers are used on many carburetors to hold various rods and linkages. Retainer is installed over linkage rod to…see more
- Part Number
- 4250A
Rod Retainers, Carter OEM# 150A-10
Package of 10 Rod retainers....see more
Rod Retainers are used on many carburetors to hold various rods and linkages. Retainer is installed over linkage rod to…see more
- Part Number
- 4252A
Rod Retainers, Carter OEM# 150A-21
Package of 10 Rod retainers....see more
Rod Retainers are used on many carburetors to hold various rods and linkages. Retainer is installed over linkage rod to…see more
- Part Number
- 4252C
Self Locking Retainer
Self Locking Retainer
Hole ID: .495"
Overall OD including tabs: .755"
Thickness: .014"
Qty: 1…see more
- Part Number
- 1030B
Throttle Rod Retainer
Hole ID: .160"...see more
Throttle Rod Retainer
Hole ID: .160"
Qty: 1…see more
- Part Number
- 4261A
Triangular Retainer
Retainer ID: Approx. .390"...see more
Retainer ID: Approx. .390"
Quantity: 1 retainer…see more
- Part Number
- 4260
- Carburetor Tech Info (6)
- Mercury Marine Mercarb Carbureto
- Rochester 2G/Two Jet Tech (2)
- Rochester Quadrajet Tech (23)