Carter- AS 1bbl Carburetor Parts
Accelerator Pump Plunger - Leather 5/8" (2.325" length)
Fits:
Carter AS carburetors
Carter WCD, WCG carburetors
Carter WCFB carburetors
Carter Accelerator Pump Plunger - Leather cup is designed to…see more
- Part Number
- 1061G
Base Gasket - 1 BBL, .062"
Fits:
Carter AS 1 Barrel Carburetors
Ford / Motorcraft 1250 1 Barrel Carburetors
Solex Carburetors
Quantity: 1 Gasket
Gasket thickness: .062"…see more
- Part Number
- 1730-1X
Base Gasket - Carter AS
Fits:
Carter AS 1 Barrel Carburetors
Gasket thickness: .045"
Gasket ID: 1.60"
Bolt hole spacing center to center 2.70"
MADE IN…see more
- Part Number
- 1730-1W
Base Gasket, Rochester B, BC, BV - .090", OEM # 3795179(1723C)
Base gasket fits between carburetor and intake manifold.
Quantity: 1 Gasket
Gasket thickness: .090"
OEM #3795179
Fits:
Rochester B, BC, BV Carburetors…see more
- Part Number
- 1723C
Carter Needle and Seat Assembly, .093" diameter
Stock Replacement .093" diameter for Carter carburetors. Compatible with new alcohol enhanced fuels.
Fits:
Carter BB carburetors
Carter RBS carburetors
Carter…see more
- Part Number
- 3426C
Check Balls, Accelerator Pump, 5 pack of 1/8" aluminum balls
Quantity: 5 Balls...see more
Aluminum 1/8" ball is used as a one-way check valve. Replaces original check ball. Quantity: 5 Balls…see more
- Part Number
- 1022E
Choke Cover Gasket
Gasket OD: 2.187"
Gasket ID: 1.875
Gasket thickness: .047"
Fits:
Carter carburetors
Ford/Motorcraft carburetors
Solex carburetors
Quantity: 2 gaskets…see more
- Part Number
- 1240F
Choke Cover Gasket
Gasket OD: 2.40"
Gasket ID: 1.875"
Gasket thickness: .047"
Fits:
Carter carburetors
Ford/Motorcraft carburetors
Holley carburetors
Nikki carburetors
Solex carburetors
Quantity:…see more
- Part Number
- 1240G
Choke Cover Retainers
Retainer, Choke Cover, OEM # 7000614 Qty: 3 Retainers…see more
- Part Number
- 1252
Choke Cover Retainers
Qty: 3 Retainers
Fits:
Carter AFB, AVS carburetors
Carter WCFB carburetors
Carter AS carburetors
Carter BB carburetors
Carter RBS carburetors
Carter…see more
- Part Number
- 1252B
Float Pin-
Pin diameter: .093"
Pin length: 1.19"
Quantity: 1 pin
Replacement Float Pin.
Fits:
Carter AS carburetors
Carter RBS carburetors
Holley AA-1, 852,…see more
- Part Number
- 1493C
Idle Adjusting Screw Spring
10-32 pitch thread
Spring length: .430"
Spring OD: .280"
Spring ID: .195"
Wire Diameter: .038"
Quantity: 1
Applications:
Carter WCD, WGD…see more
- Part Number
- 2041B
Needle & Seat Assembly- Carter (.101")
Dimensions:
Seat orifice diameter: .101"
Male Threads: 7/16"-20
Female Threads: 1/2"-20
Overall Length: .937"
Fits:
Carter RBS carburetors
Carter AS carburetors…see more
- Part Number
- 3426E
Replacement Choke Thermostat Cap for Carter / Holley carburetors
Fits:
Carter W-1, WA-1, WE, WO, YF, YFA, WCD, WGD, AFB, WCFB carburetors.
Holley carburetors.
OD: 2.175"
Depth of case: .575"
Note:…see more
- Part Number
- 1254C
Retainer - E-Clip - .187", 3/16", package of 10
Retainer Dimensions-
E-Clip size: 3/16"
Thickness: .025"
O.D.: .335"
Throat Opening: .125"
Quantity: 10 retainers
Note:
E-clip sizes refer to diameter…see more
- Part Number
- 4251F
Retainer Pin, package of 10
Retainer Dimensions- Wire thickness: .025"...see more
Retainer pin is used on many carbs to hold various rods and linkages. Always handy to have several on hand,…see more
- Part Number
- 4252
Retainer, Rod-Clip, package of 10 (OEM # 7005032)
Rod-Clip Retainers are used on many carbs to hold various rods and linkages. Retainer is installed over linkage rod and…see more
- Part Number
- 4253
Rod Retainers
Package of 10 Rod retainers....see more
Rod Retainers are used on many carburetors to hold various rods and linkages. Retainer is installed over linkage rod to…see more
- Part Number
- 4250A
- Carburetor Tech Info (6)
- Mercury Marine Mercarb Carbureto
- Rochester 2G/Two Jet Tech (2)
- Rochester Quadrajet Tech (23)