Replacement assembly with "Flat" shaped terminal. The flat terminal allows use of standard spade type electrical connection. Electric Choke Thermostat fits Rochester Quadrajet, Twojet and Dualjet carburetors.
When 12v power is supplied to the choke and the element heats up, the bi-metal coil tightens up. When the coil cools down, the coil un-winds.
Includes 3 retainers and 3 screws.
Screws included with this kit are 4215, over sized, self tapping screws.
Hot-Air Choke to Electric Choke Conversion:
This electric choke thermostat can be used to replace original hot-air thermostat, just run a 12 volt wire to a "keyed" power source and remove original hot-air choke thermostat gasket. A "keyed power source only receives power when the ignition key is turned on.
Thermostat diameter: 2-1/4"
Note: Pigtail connector # 1331 or OEM connector can be used for a factory look, but the connectors locking/unlocking mechanism will be lost.