Solid State Electronic Automatic Choke Kit-
BB Chevy 396-454
Easy to install electronic choke kit converts divorced choke carburetors to a solid state electronic choke. Contains everything you need: Electric choke thermostat housing assembly and mounting bracket, choke rod, heat sensor, wiring and detailed instructions.
Efficient choke operation affects fuel economy during the first 5 miles of driving after starting the engine.
Note: Choke rod moves up when thermostat element heats up.
Chevrolet 1970-1971, 396-454 with Rochester Quadrajet
Chevrolet 1972-1973-1974, 454 with Rochester Quadrajet
Chevrolet Truck 1970, 396 with Rochester Quadrajet
Chevrolet Truck 1971-1972, 402 with Rochester Quadrajet
Chevrolet Truck 1973-1974-1975, 454 with Rochester Quadrajet
GMC Truck 1973-1975-1976, 454 with Rochester Quadrajet
May fit other applications also.
This choke kit is designed for use with original intake manifolds from applications listed above. It may or may not fit on aftermarket or different year/application intake manifolds. Aftermarket intakes may require the choke thermostat bracket and/or intake manifold to be modified and altered in order to mount electric choke to intake manifold.
Identification Help: This conversion kit is designed for intake manifolds that originally were equipted with a divorced choke style with mounting points similar to our part #1201.
Electronic Choke Conversion Kit is not returnable if original packaging is opened.
Distance from center of mounting screw hole to locating tab: .950"
Mounting flange to top of choke assembly: 2.4" high
Width of unit: approx. 2.9"
Width of unit from center of mounting screw: 2.2" & 0.7"
Depth of unit (mounting screw to electrical connectors): approx. 2.5"
Diameter of electric choke plastic housing: 2 1/8"
Length of choke rod: 1.2"
Height of choke rod at upper limit: approx 3.9" (from flange)
Height of choke rod at lower limit: approx 2.4" (from flange)
Flange offset: .330" raised above flange mounting point