Ford 1100 carburetors.
Ford 1101 carburetors.
Ford 2100 carburetors. *
Ford 2150 carburetors.
Ford 4100 carburetors. *
Ford 4300 carburetors.
Ford 4350 carburetors.
* Jet will not fit some early 2100 and 4100 carburetors, as they used a significantly smaller jet thread.
Jet orifice size is displayed in Item Heading.
Quantity: 1 Jet
Jet Thread Diameter: 5/16" (.310")
Jet Body Diameter: 3/8" (.375")
Jet Overall Height: .350"
USA made metering jet is used in Ford / Motorcraft / Autolite carburetors.
Used to tailor air fuel ratio. Number indicates jet size and dimension of jet hole. (For example: a jet stamped 60 will have a .060" orifice) A larger diameter jet will richen the entire fuel curve, from part throttle to full throttle. Re-jetting your carburetor can pay big dividends at the race track and/or increased fuel efficiency. Jet number is stamped into each jet.
Jets are sold singly.
If you have a Two Barrel (2100, 2150) carburetor, You need to order 2 Jets.
If you have a Four Barrel (4100, 4300, 4350) carburetor, You need to order 2 Jets for the primary side and 2 jets for the secondary side of the carburetor.
Note: These metering jets are correctly profiled and specifically made for the Ford/Motorcraft/Autolite carburetors.
Note: This item is a non-returnable item. Carburetor jets are not returnable.