Rochester 2G Carburetor Inlet Fittings
Rochester Two Jet - 2G/2GC/2GV/2GE carburetor fuel inlet fittings are available in OEM styles. Longer, extended thread fittings give new life to worn castings. Check out our heli-coil thread installation service for 2 bbl carburetors.
1/2"-20 x 1/8 Pipe Thread - Fuel Inlet Reducer Fitting
Female Thread: 1/2"-20 with inverted flare
Male Thread: 1/8" pipe
Overall length: .780"
ID: .200"
Wrench size: 9/16"
Quantity: 1
Fits:
Rochester…see more
- Part Number
- 2218J
1/2"-20 x 5/16" Barbed Nipple
Fits Rochester 4G, 2G and Carter / Edelbrock AFB, AVS...see more
This fitting makes it easy to hook up a rubber gas line to your carburetor. Barbed side of fitting is…see more
- Part Number
- 2243
1/8-Pipe Thread x 1/4" Barbed Nipple
This fitting makes it easy to hook up a rubber 1/4" gas line to your Rochester carburetor...see more
This fitting makes it easy to hook up a rubber 1/4" gas line to your Rochester carburetor. Threaded male side…see more
- Part Number
- 2241
5/16" Inlet Fitting / Power Valve Gaskets, 5 pack
Gasket OD" .410"
Gasket ID" .312"
Gasket Thickness" .031"
Quantity: 5 gaskets
Fits:
Rochester M (Monojet) carburetors
Rochester H, HV carburetors…see more
- Part Number
- 2233C
5/8" Inlet Fitting Gaskets, 5 pack
Gasket OD" .815"
Gasket ID" .640" OEM# 7001597...see more
Inlet fitting gaskets for carburetors with 5/8" diameter inlets.
Quantity: 5 gaskets
Gasket OD" .815"
Gasket ID" .640"
OEM# 7001597…see more
- Part Number
- 2233
5/8"-18 x #6 AN Fuel Inlet Adapter Fitting
No machine work or tapping is required, adapter uses standard Rochester 5/8"-18 threads....see more
Adapter fitting allows use of high performance racing fuel hoses and fittings. Adapter fitting has a female 5/8"-18 flared end…see more
- Part Number
- 2224
5/8"-18 x #8 Fuel Inlet AN Adapter Fitting
Number 8 AN male fitting is flared to accept standard #8 AN female hose fittings....see more
Adapter fitting allows use of high performance racing fuel hoses and fittings. Adapter fitting has a female 5/8"-18 flared end…see more
- Part Number
- 2225
5/8"-18 x 1/4 Pipe Thread - Fuel Inlet Reducer Fitting
Fits Rochester 4G & 2G carburetors...see more
Male Thread: 5/8" -18
Female Thread: 1/4" pipe
Overall length: .900"
ID: .220"
Wrench size: 3/4"
Quantity: 1 fitting
Fits Rochester…see more
- Part Number
- 2218F
5/8"-18 x 3/8" Barbed Nipple
Threaded male side of fitting is flared to seal against the factory inlet fitting....see more
This fitting makes it easy to hook up a rubber gas line to your carburetor. Threaded male side of fitting…see more
- Part Number
- 2242
5/8"-18 x 5/16" Barbed Nipple
This fitting makes it easy to hook up a rubber gas line to your carburetor. Threaded male side of fitting…see more
- Part Number
- 2240
5/8"-20 x 1/2"-20 Fuel Inlet Fitting, .350" Extended Threads
OAL: .800"
Thread length: .350"
Thread: 5/8-20 male
Thread: 1/2-20 female w/ inverted flare
Quantity: 1 fitting and 1 seal.
Fits:…see more
- Part Number
- 2218D
5/8"-20 x 1/2"-20 Fuel Inlet Fitting, OEM # 7000262
Includes gasket, Fits: Rochester 2G, 4G and Carter AFB carburetors...see more
Replacement 2G Inlet fitting. Seal is included with fitting. Fits carburetors with 5/8" inlets.
OAL: .685"
Thread length: .200"
Thread: 5/8-20…see more
- Part Number
- 2218C
7/8" Inlet Fitting Gaskets - Extra Thick Nylon, 5 pack
Extra thickness and nylon material helps correct leaking inlet fittings.
Inlet fitting gaskets for carburetors with 7/8" diameter inlets.
Quantity:…see more
- Part Number
- 2231B
7/8" Inlet Fitting Gaskets - Rubber Coated Aluminum, 5 pack
Inlet fitting gaskets for carburetors with 7/8" diameter inlets.
Quantity: 5 gaskets
Gasket OD" 1.06"
Gasket ID" .875" (7/8")
Gasket…see more
- Part Number
- 2231C
7/8" Inlet Fitting Gaskets, 5 pack
Fits Rochester and Carter carburetors - 7/8" diameter inlet QJet carburetors can be identified by...see more
Inlet fitting gaskets for carburetors with 7/8" diameter inlets.
Quantity: 5 gaskets
Gasket OD" 1.055"
Gasket ID" .875" (7/8")
Gasket…see more
- Part Number
- 2231
7/8"-20 x #6 AN - Adapter Inlet Fitting
Adapter fitting replaces OEM Inlet Fitting and screws into Rochester Quadrajet & 2G casting using...see more
Aluminum adapter inlet fitting allows use of high performance racing fuel hoses and fittings. Adapter fitting replaces OEM Inlet Fitting…see more
- Part Number
- 2222
7/8"-20 x 1/2-20 - Self Tapping Inlet Fitting
Very Limited Quantity available.
Self tapping inlet fitting for use with 7/8" diameter inlet with 5/16" gas line. Includes new…see more
- Part Number
- 2203
7/8"-20 x 1/2"-20 - .400" Thread Inlet Fitting
OEM # 7013525...see more
OAL: .800"
Thread length: .400"
Thread: 7/8-20 male
Thread: 1/2-20 female with inverted flare
OEM # 7013525
Quantity: 1 fitting…see more
- Part Number
- 2218A
7/8"-20 x 1/2"-20 - Inlet Fitting
Replacement Inlet fitting. Seal is included with fitting.
OAL: .650"...see more
Fits:
Rochester Quadrajet carburetors
Fits Rochester 4G carburetors
Fits Rochester 2G carburetors
Carter / Edelbrock AFB, AVS carburetors
Carter WCFB…see more
- Part Number
- 2218E
7/8"-20 x 1/8"-Pipe Thread - .500" Extended Thread Inlet Fittin
Replacement Inlet fitting has extended threads to grab deeper into carburetor castings. Many main body castings have threads that are…see more
- Part Number
- 2218B
7/8"-20 x 5/8"-18 - .500" Extended Thread Inlet Fitting
Replacement Inlet fitting has extended threads to grab deeper into carburetor castings....see more
Replacement Inlet fitting has extended threads to grab deeper into carburetor castings. No machine work or tapping is required, many…see more
- Part Number
- 2206
7/8"-20 x 5/8"-18 - .650" Extended Thread Inlet Fitting $13.44
Replacement Inlet fitting has extended threads to grab deeper into carburetor castings. No machine work or tapping is required...see more
Replacement Inlet fitting has extended threads to grab deeper into carburetor castings. No machine work or tapping is required, many…see more
- Part Number
- 2217
7/8"-20 x 5/8"-18 - Inlet Fitting (long)
Replacement Inlet fitting fits Rochester Quadrajet and 2G carburetors.
Seal is included with fitting....see more
Replacement Inlet fitting fits Rochester Quadrajet and 2G carburetors. Seal is included with fitting. Fits Rochester carburetors with 7/8" inlets and…see more
- Part Number
- 2213
7/8"-20 x 5/8"-18 - Self Tapping Inlet Fitting
Thread: 7/8-20 male (Thread length: .525")
Thread: 5/8-18 female w/ inverted flare
Quantity: 1 fitting and 1 gasket
Fits Rochester…see more
- Part Number
- 2202A
7/8"-20 x 5/8"-18 - Self Tapping Inlet Fitting (Long)
Very Limited Quantities!
Self tapping inlet fitting for use with 7/8" diameter inlet with 3/8" gas line. Includes new inlet…see more
- Part Number
- 2202
Brass Pipe Plug - (1/8" N.P.T.)
Replacement brass plug fits all 1/8" N.P.T. used on...see more
Replacement brass plug fits all 1/8" N.P.T. used on many Rochester carburetor application to block threaded base plate ports. Outside diameter…see more
- Part Number
- 2201A
Service- Fuel Inlet Thread Repair, Heli-Coil Installation, 7/8"-
QuadrajetParts.com will install a Heli-Coil Thread Insert on your Carburetor with 7/8"-20 (7/8" diameter and 20 threads per inch) fuel inlet. This will restore your...see more
QuadrajetParts.com will install a Heli-Coil Thread Insert on your Carburetor with 7/8"-20 (7/8" diameter and 20 threads per inch) fuel…see more
- Part Number
- 9021
Threaded Carburetor Insert Installation Kit for 7/8"-20 inlet fi
When installed, the stainless steel threaded insert makes the carburetors inlet threads stronger and more durable than the original threads....see more
This kit is used to restore stripped and damaged carburetor inlet fitting casting to better than new condition. When installed,…see more
- Part Number
- 4941
- Carburetor Tech Info (6)
- Mercury Marine Mercarb Carbureto
- Rochester 2G/Two Jet Tech (2)
- Rochester Quadrajet Tech (23)