Screws, Clips, Retainers
Adjusting Nut for Holley Needle & Seat
Nut thickness: .150"
Distance between flats on ID of nut: .300"
Quantity: 1 nut
OEM # 35R-160
Fits:
Holley carburetors
This adjusting…see more
- Part Number
- 2015C
Adjusting Screw for Holley Needle & Seat
Head Diameter: .570"
Thread: 1/4"-32
Thread length: .320"
Gold cad plated
Quantity: 1 screw
OEM # 5R-765
Fits:
Holley carburetors
This screw…see more
- Part Number
- 2015B
Check Balls / Plug, 5 pack of 7/64 lead balls
Lead 7/64" check ball / plug.
Quantity: 5 Balls
Applications:
Carter, Holley, Rochester…see more
- Part Number
- 1022J
Check Balls, 5 pack of 5/32 lead balls
Lead 5/32" ball is used in many accelerator pump systems as a one-way check valve. Replaces original check ball in…see more
- Part Number
- 1022I
Check Balls, Accelerator Pump, 5 pack of 1/8" aluminum balls
Quantity: 5 Balls...see more
Aluminum 1/8" ball is used as a one-way check valve. Replaces original check ball. Quantity: 5 Balls…see more
- Part Number
- 1022E
Check Balls, Accelerator Pump, 5 pack of 1/8" steel balls
Quantity: 5 Balls...see more
Steel 1/8" ball is used as a one-way check valve. Replaces original check ball. Quantity: 5 Balls…see more
- Part Number
- 1022D
Check Balls, Accelerator Pump, 5 pack of 3/16 steel balls
Chrome steel 3/16" ball is used in the accelerator pump system as a one-way check valve. Replaces original check ball…see more
- Part Number
- 1022
Check Balls, Accelerator Pump, 5 pack of 5/32 steel balls
Used in the accelerator pump system as a one-way check valve....see more
Steel 5/32" ball is used in the accelerator pump system as a one-way check valve. Replaces original check ball. Quantity: 5…see more
- Part Number
- 1022B
Cotter Pins - 3/64", package of 10
Dimensions-
Over-all length: .800"
Thickness: .017"
Pin diameter: .047" (3/64")
Quantity: 10 cotter pins
Fits:
Holley carburetors
Keihin carburetors
Nikki carburetors…see more
- Part Number
- 4252H
Cotter Pins - 3/64", package of 10
Dimensions-
Over-all length: .600"
Thickness: .017"
Pin diameter: .047" (3/64")
Quantity: 10 cotter pins
Fits:
Holley carburetors
Rochester Fourjet (4G) carburetors…see more
- Part Number
- 4252G
Fasteners- Choke Cover Screws, Qty: 3
Quantity: 3 screws.
Size: 8-32 x 5/16" (length does not include screw head)
Fits:
Carter BB carburetors (wire clamp screw)
Carter…see more
- Part Number
- 4214B
Holley Fuel Bowl Primary Screws (Qty:4)
Fits:
Holley carburetors primary fuel bowl
yellow zinc chromate coating give screws OEM "golden" finish.
Head Design: Hex head w/ flange…see more
- Part Number
- 4228A
Holley Fuel Bowl Secondary Screws (Qty:4)
Fits:
Holley carburetors secondary fuel bowl
yellow zinc chromate coating give screws OEM "golden" finish.
Head Design: Hex head w/ flange…see more
- Part Number
- 4228B
Retainer - C-Clip - .375", 3/8", package of 10
Retainer Dimensions-
C-Clip size: 3/8"
Thickness: .031"
O.D.: .493"
I.D.: .340"
Quantity: 10 retainers
Note:
Steel external C-clips. These clips fit into a groove on a…see more
- Part Number
- 4254A
Retainer - C-Clip - .375", 3/8", package of 10
Retainer Dimensions-
C-Clip size: 3/8"
Thickness: .024"
O.D.: .448"
Quantity: 10 retainers
Note:
Steel external C-clips. These clips fit into a…see more
- Part Number
- 4254C
Retainer - E-Clip - .109", 7/64", package of 10
Retainer Dimensions-
E-Clip size: 7/64"
Thickness: .015"
O.D.: .220"
Throat Opening: .075"
Quantity: 10 retainers
Note:
E-clip sizes refer to diameter…see more
- Part Number
- 4251H
Retainer - E-Clip - .125", 1/8", package of 10
Retainer Dimensions-
E-Clip size: 1/8"
Thickness: .017"
O.D.: .230"
Throat Opening: .090"
Quantity: 10 retainers
Note:
E-clip sizes refer to diameter…see more
- Part Number
- 4251
Retainer - E-Clip - .156", 5/32", package of 10
Retainer Dimensions-
E-Clip size: 5/32"
Thickness: .025"
O.D.: .280"
Throat Opening: .102"
Quantity: 10 retainers
Note:
E-clip sizes refer to diameter…see more
- Part Number
- 4251J
Retainer - E-Clip - .187", 3/16", package of 10
Retainer Dimensions-
E-Clip size: 3/16"
Thickness: .025"
O.D.: .335"
Throat Opening: .125"
Quantity: 10 retainers
Note:
E-clip sizes refer to diameter…see more
- Part Number
- 4251F
Retainer - E-Clip - .219", 7/32", package of 10
Retainer Dimensions-
E-Clip size: 7/32"
Thickness: .025"
O.D.: .435"
Throat Opening: .160"
Quantity: 10 retainers
Note:
E-clip sizes refer to diameter…see more
- Part Number
- 4251G
Retainer - E-Clip - .375", 3/8", package of 10
Retainer Dimensions-
E-Clip size: 3/8"
Thickness: .034"
O.D.: .660"
Throat Opening: .265"
Quantity: 10 retainers
Note:
E-clip sizes refer to diameter…see more
- Part Number
- 4251E
Retainer (LH) Rod Clip (OEM #7003242)
Special clip used to retain carburetor 5/32" rod linkage. Direct replacement for original retainer.
Quantity: 1 Retainer.
Hole ID is :…see more
- Part Number
- 4257
Retainer Pin, package of 10
Retainer Dimensions- Wire thickness: .025"...see more
Retainer pin is used on many carbs to hold various rods and linkages. Always handy to have several on hand,…see more
- Part Number
- 4252
Retainer Pin, package of 10
Retainer Dimensions-
Wire thickness: .032"
Width: .155"
Length: .435"
Quantity: 10
Fits:
Carter BBS carburetors
Carter RBS carburetors
Ford/Motorcraft 1100, 1101…see more
- Part Number
- 4252I
Retainer, E-Clip, package of 10
Retainer Dimensions-
Thickness: .025"
O.D.: .525"
Throat Opening: .182"
Quantity: 10…see more
- Part Number
- 4251D
Rod Retainers, Carter OEM# 150A-10
Package of 10 Rod retainers....see more
Rod Retainers are used on many carburetors to hold various rods and linkages. Retainer is installed over linkage rod to…see more
- Part Number
- 4252A
Screws for Throttle Shaft - 8-32
Head Design: Tapered philips head
Overall length: .465"
Thread size: 8-32
Head diameter: .246"
Thread diameter: .160"
Quantity: 10 screws
Fits:…see more
- Part Number
- 4212D
Screws for Throttle Shaft & Choke
Head Design: Tapered philips head
Overall length: .290"
Head diameter: .189"
Thread diameter: .135"
Thread size: 6-32
Quantity: 20 screws…see more
- Part Number
- 4212A
Thermostat Cover (Choke) Screws, OEM #7010424
Fits:
Carter BB carburetors (wire clamp screw)
Carter BBS carburetors (compinsator screw, choke pull-off)
Carter RBS carburetors
Carter YF carburetors
Carter YFA carburetors…see more
- Part Number
- 4214
Thermostat Cover (Choke) Screws, Self Tapping
Self tapping thermostat cover screws replace originals. Philips head....see more
Self tapping thermostat cover screws replace originals. Philips head. Used to replace choke housings with riveted thermostats. Qty: 3 screws (10-32…see more
- Part Number
- 4215
Throttle Lever 1/4" Ball Stud, 5/16 Thread
Throttle lever ball stud is used to attach throttle cable to carburetor arm...see more
Throttle lever ball stud is used to attach throttle cable to carburetor arm.
Thread size: 5/16-18
Thread length: .450"
Stud ball…see more
- Part Number
- 4245
Throttle Lever 7/32" Ball Stud
Throttle lever ball stud is used to attach throttle cable to carburetor arm...see more
Throttle lever ball stud is used to attach throttle cable to carburetor arm.
Thread size: 1/4-20
Thread length: .375"
Stud ball…see more
- Part Number
- 4241
- Servicing Bi-Metal Choke Springs
- Ethanol (E-10) fuel in carbureted engines
- Where do I locate my carburetor number?
- How to Test a Vacuum Break / Pulloff
- #4802 Idle Pickup Tubes
- #3622 Power Piston Retaining Bushing
- O-Ring Inlet Repair Fuel Fitting
- #2702 Secondary Air Valve Spring Tension
- #4231B - Air Cleaner Repair Bracket
- Needle & Seats
- #2701 Secondary Air Valve Cam Replacement
- #2460-82 Changing Primary Metering Jets
- #2251/2252/2253 Fuel Filter Replacement
- #1742/1743 Secondary Well Plug Fix
- Float level adjustment for Quadrajet and Dualjet Carburetor
- Servicing the tamper resistant choke cover on Rochester carbs
- #1310-SR Mixture Control Solenoid Adjust
- What is a Carter Quadrajet?
- Quadrajet Model Designations
- Edelbrock Quadrajets
- #1003 Accelerator Pump Styles
- Exploded View 4MV 1975 thru
- Exploded View 4MV 1971 thru 1974
- Exploded View 4MV 1967 thru 1970
- Exploded View 4MV 1966
- Fuel Pressure
- Power Piston & Primary Metering Rods
- Fuel Inlets
- Exploded View 2G / 2GV
All Topics
- Carburetor Tech Info
- Mercury Marine Mercarb Carbureto
- Rochester 2G/Two Jet Tech
- Rochester Quadrajet Tech
Articles RSS Feed
Submit An Article