Home
Catalog
Rochester- QUADRAJET
USED Q-Jet Parts
Misc. Parts
USED - Idle Compensator Bi-Metal Assembly

USED - Idle Compensator Bi-Metal Assembly
Our Part # U-ICC-1

$7.99

Replaces Rochester Products Part # 27939, 32329, 32708, 34028

Specs:
Length: 1.2"
Width: .550"
Height: .375"

Quantity: 1

Note:
This is a used part and may require cleaning.
Quantities are limited.

Idle Compensator is located on rear side of Rochester Quadrajet.

Recommended Items:
#1737H - Idle Compensator Cork Gaskets

Quantity:

Currently viewing:USED - Idle Compensator Bi-Metal Assembly

Related Products

Other products in the Misc. Parts category
	USED - APT Metering Rod w/ Filler Spool
	USED - TPS Adjusting Screw - Rochester
	USED - TPS Plunger - Rochester Quadrajet, Dualjet
	USED - TPS Plunger - Rochester Varajet
	USED - TPS Spring - Rochester Quadrajet, Dualjet, Varajet
	USED- Accelerator Pump Discharge Ball Retainer
	USED- APT Aneroid Insert - OEM #7044330
	USED- APT Aneroid Insert #4
	USED- Throttle Blades, 1.375" - Rochester Quadrajet Primary

Related Categories

Rochester- QUADRAJET

Quadrajet Accelerator Pumps
- Accelerator Pump Return Spring-
- Accelerator Pump- "Double Lip" Cup, 21/32", Ethanol Resistant
- Accelerator Pump- "Garter Spring" Cup, 21/32", Ethanol Resistant
- Accelerator Pump- "Garter Spring" Cup, 3/4", Alcohol Resistant
- Baffle for Accelerator Pump Well
- Check Balls, Accelerator Pump, 5 pack of 3/16 steel balls
- Duration Spring for Accelerator Pump (Long)
- Duration Spring for Accelerator Pump (Short)
- Garter Spring for 21/32" Accelerator Pump Cup
- Quadrajet Accelerator Pump Arm Casting Repair
- Quadrajet Accelerator Pump Assembly, 2.43" Length, 21/32"
- Quadrajet Accelerator Pump Assembly, 2.53" Length, 21/32"
- Quadrajet Accelerator Pump Assembly, 2.61" Length, 21/32"
- Quadrajet Accelerator Pump Assembly, 2.65" Length, 21/32"
- Quadrajet Accelerator Pump Assembly, 2.76" Length, 21/32"
- Quadrajet TPS Stem & Accelerator Pump Retainer, package of 5
- Return Spring for Accelerator Pump
- Roll Pins, Accelerator Pump and Lever Hinge, 5-Pack
- Spring Retainer for Accelerator Pump Plunger
Quadrajet Carburetor Books
Quadrajet Carburetor Rebuild Kit
- Quadrajet Rebuild Kit (Marine) 4016
- Quadrajet Rebuild Kit (Marine) 4017
- Quadrajet Rebuild Kit (Marine) 4018
- Quadrajet Rebuild Kit, 6 Cyl - Buick 1980-84, Cadillac 1981-83,
- Quadrajet Rebuild Kit, Buick 1966-1967 4001A
- Quadrajet Rebuild Kit, Buick 1966-74, Chevy 1967-68, Pontiac 196
- Quadrajet Rebuild Kit, Buick 1975-76, 79-80, Chevy 1976-77, GMC
- Quadrajet Rebuild Kit, Buick 1975-77, Olds 1975-77, Pontiac 1975
- Quadrajet Rebuild Kit, Buick 1977-87, Chevy 1987, GMC 1977-78, O
- Quadrajet Rebuild Kit, Buick 1980-90, Cadillac 1986-90, Chevy 19
- Quadrajet Rebuild Kit, Cadillac 1967-69, Pontiac 1968-69 4002B
- Quadrajet Rebuild Kit, Chevrolet 1969-1970-1971-1972 4004A
- Quadrajet Rebuild Kit, Chevrolet 1972 4006
- Quadrajet Rebuild Kit, Chevy 1965-67, Olds 1966 4001C
- Quadrajet Rebuild Kit, Chevy 1973-74, GMC 1972-79, Checker 1973-
- Quadrajet Rebuild Kit, Chevy 1976-80, GMC 1980-89, Pontiac 1976
- Quadrajet Rebuild Kit, fits 1970-74 Cadillac, 1973-76 Chevy/GMC,
- Quadrajet Rebuild Kit, GM 1966-74 4001B
- Quadrajet Rebuild Kit, GM 1975-79 4009F
- Quadrajet Rebuild Kit, GM 1975-80 1983 4009E
- Quadrajet Rebuild Kit, GM 1975-81 4007B
- Quadrajet Rebuild Kit, GM 1978-1988, Chrysler 1985-89 4009B
- Quadrajet Rebuild Kit, GM 1979-86 4009A
- Rebuild Kit Edelbrock Quadrajet (4021) carb#1903 1904 1905 1906
- Rebuild Kit for Edelbrock Quadrajets (4020), carb#1901,1902,1910
Quadrajet Chokes
- Carburetor Choke Cable - Manual 6' Long
- Choke Cover Gaskets
- Choke Cover Pop Rivets, OEM # 17059739
- Choke Cover Retainers
- Choke Cover Retainers
- Choke Cover Retainers, OEM # 17057570
- Choke Heat Shield
- Choke Housing Tube Seal - (5-Pack)
- Divorced Choke Thermostat - Rochester
- Divorced Choke Thermostat - Rochester Monojet/Holley 5210
- Divorced Choke Thermostat - Rochester, Mercury Marine
- Divorced Choke Thermostat Cover -
- Divorced Choke Thermostat Cover -
- Divorced Choke Thermostat- Chevrolet 66-71
- Divorced Choke Thermostat- Chevrolet Big Block
- Electric Choke Conversion Kit- For Buick 1968-74 Quadrajet Carbu
- Electric Choke Conversion Kit- For Cadilllac 1969-74 Quadrajet C
- Electric Choke Conversion Kit- For Pontiac 1968-72 Quadrajet Car
- Electric Choke Thermostat Kit - Rochester
- Electric Choke Thermostat Kit - Rochester ("Flat" Terminal)
- Electronic Choke Conversion Kit- BB Chevy 396-454
- Electronic Choke Conversion Kit- Buick 455 1972-74
- Electronic Choke Conversion Kit- Cadillac 1968-69
- Electronic Choke Conversion Kit- Chevrolet 1965-70 w/ 4bbl Carbu
- Electronic Choke Conversion Kit- Chevrolet 1966-71 & 1978 w/ 4bb
- Electronic Choke Conversion Kit- SB Chevy 350-400 1971-78
- Hot Air Choke Thermostat - NOS - Rochester OEM# 17051964
- Hot Air Choke Thermostat - NOS - Rochester OEM# 17051995
- Hot Air Choke Thermostat - Rochester
- Pigtail Connector for GM Electric Choke
- Plastic Choke Cap - OEM# 7004072
- Thermostat Cover (Choke) Screws, OEM #7010424
- Thermostat Cover (Choke) Screws, Self Tapping
Quadrajet Electrical
- Mixture Control Solenoid - 1979 thru 1980
- Pigtail Connector for GM Electric Choke
- Pigtail Connector for Mixture Control Solenoid
- Solenoid Body Spring - for 1981-90 GM Mixture Control Solenoids
- Throttle Position Sensor - 1980 thru 1990 GM
- USED - TPS Spring - Rochester Quadrajet, Dualjet, Varajet
Quadrajet Floats
- Carburetor Float Hinge Pin Repair Bracket
- Dualjet & Quadrajet Brass Carburetor Float
- Dualjet & Quadrajet Nitrophyl Carburetor Float
- Quadrajet 4MC, 4MV, M4M Nitrophyl Carburetor Float
- Quadrajet 4MC, 4MV, M4M Brass Carburetor Float
- Quadrajet Brass Carburetor Float
- Quadrajet Nitrophyl Carburetor Float
- Rochester E2ME, E4ME Brass Carburetor Float
- Rochester E2ME, E4ME Nitrophyl Carburetor Float
- Scale for Weighing Carburetor Floats
- USED- Float Hinge Pin- # 17057077
- USED- Float Hinge Pin- # 7037317
- USED- Float Hinge Pin- # 7041469
- USED- Float Hinge Pin- 7029856
Quadrajet Fuel & Vacuum Hose/Cap
- 1/2" Rubber Vacuum Caps
- 1/8" Rubber Vacuum Caps
- 3/8" Rubber Vacuum Caps
- 5/16" Steel Fuel Line Clamps - (5-pak)
- 5/16" Wire Type Fuel Line Clamps - (5-pak)
- 5/32" Rubber Vacuum Caps
- 7/32" Rubber Vacuum Caps
- Ethanol Compatible 1/2" Fuel Hose (by the foot)
- Ethanol Compatible 1/4" Fuel Hose (by the foot)
- Ethanol Compatible 3/8" Fuel Hose (by the foot)
- Ethanol Compatible 5/16" Fuel Hose (by the foot)
- Rubber Vacuum Cap Assortment Kit, 1/8", 5/32", 7/32", 3/8", 1/2"
- Vacuum Hose 5/32", by the foot
- Vacuum Tee Connector (3 way) 3/16" (Pack of 5)
Quadrajet Fuel Filters
- Edelbrock Micro Fuel Pump (38 GHP)
- Fuel Filter Universal Metal 5/16" Inline
- Inlet Fitting/Fuel Filter Gaskets .410" ID- 5 pack
- Long Paper Carburetor Fuel Filter
- Long Paper Carburetor Fuel Filter with Check Valve
- Short Marine Carburetor Fuel Filter, low restriction
- Short Mercury Marine Carburetor Fuel Filter
- Short Paper Carburetor Fuel Filter
- Short Paper Carburetor Fuel Filter with check valve
- Sintered Bronze Carburetor Fuel Filter
- Spring for Carburetor Fuel Filter
Quadrajet Gaskets & Seals
- Quadrajet Airhorn Gaskets
- Quadrajet Throttle Body Gaskets
- Quadrajet Base Gaskets
- Quadrajet Misc. Gaskets & Seals
Quadrajet Idle Mixture Screws
- Idle Mixture Screw- 10-32 x 1.311" (#2010G)
- Idle Mixture Screws - (#2003A) Metric Hex Head Replacement
- Idle Mixture Screws (#2002)
- Idle Mixture Screws and Springs, # 17062905 (#2003) metric
- Idle Mixture Screws for Rochester & Carter (#2009C)
- Idle Mixture Screws, # 7048854, 7048858 (#2001)
- Idle Mixture Screws, 10-32 x 1.85" (#2003B)
- Idle Mixture Screws, 10-32 x 2.05" (#2003C)
- Limiter Caps for Idle Mixture Screws
- Rochester Idle Mixture Screw, # 7048532 (#2006G)
- Spring, Idle Speed / Fast Idle
- Springs for Idle Mixture Screws
- Springs for Idle Mixture Screws
Quadrajet Inlet Fittings
- 1" Inlet Fitting Gaskets for 1" SELF TAPPING fittings, 5 pack
- 1" Inlet Fitting Gaskets, Nylon - 5 pack
- 1" x 5/8"-18 - Self Tapping Inlet Fitting
- 1" x 5/8"-18 - Self Tapping Inlet Fitting (Long)
- 1"-20 x #6 AN - Adapter Inlet Fitting
- 1"-20 x #8 AN - Adapter Inlet Fitting
- 1"-20 x 5/8-18" - Banjo Inlet Fitting - Converts front inlet to
- 1"-20 x 5/8"-18 - Long Inlet Fitting
- 1"-20 x 5/8"-18 - Short Inlet Fitting
- 1"-20 x 5/8"-18 - Short Inlet Fitting
- 5/8"-18 x #6 AN Fuel Inlet Adapter Fitting
- 5/8"-18 x #8 Fuel Inlet AN Adapter Fitting
- 5/8"-18 x 3/8" Barbed Nipple
- 5/8"-18 x 5/16" Barbed Nipple
- 7/8" Inlet Fitting Gaskets - Extra Thick Nylon, 5 pack
- 7/8" Inlet Fitting Gaskets - Rubber Coated Aluminum, 5 pack
- 7/8" Inlet Fitting Gaskets, 5 pack
- 7/8"-20 x #6 AN - Adapter Inlet Fitting
- 7/8"-20 x 1/2-20 - Self Tapping Inlet Fitting
- 7/8"-20 x 1/2"-20 - Inlet Fitting
- 7/8"-20 x 1/8"-Pipe Thread - .500" Extended Thread Inlet Fittin
- 7/8"-20 x 5/8"-18 - .500" Extended Thread Inlet Fitting
- 7/8"-20 x 5/8"-18 - .650" Extended Thread Inlet Fitting
- 7/8"-20 x 5/8"-18 - Inlet Fitting (long)
- 7/8"-20 x 5/8"-18 - Self Tapping Inlet Fitting
- 7/8"-20 x 5/8"-18 - Self Tapping Inlet Fitting (Long)
- Brass Pipe Plug - (1/8" N.P.T.)
- Service- Fuel Inlet Thread Repair, Heli-Coil Installation, 1" In
- Service- Fuel Inlet Thread Repair, Heli-Coil Installation, 7/8"-
- Threaded Carburetor Insert Installation Kit for 1"-20 inlet fitt
- Threaded Carburetor Insert Installation Kit for 7/8"-20 inlet fi
- USED- Fuel Inlet Fitting - 1"- 20 Thread x 5/8"-18 (Original Roc
Quadrajet Jets, Rods & Hangers
- Quadrajet Calibration Tuning Kit
  - Quadrajet Calibration Tuning Kit for 1974 and earlier Q-Jets
  - Quadrajet Calibration Tuning Kit for 1975 and later Q-Jets
- Quadrajet Primary Jets
- Quadrajet Primary Rods
- Quadrajet Secondary Hangers
- Quadrajet Secondary Rods
- Rochester Quadrajet Misc. Second
Quadrajet Linkage
- Quadrajet Accelerator Linkage
- Quadrajet Choke Linkage
- Quadrajet Fast Idle Cams
  - Fast Idle Cam- Rochester # 7040833
  - Spring, Idle Speed / Fast Idle
- Quadrajet Other Linkage
- Quadrajet Vacuum Break Linkage
Quadrajet Misc.
- Baffle for Accelerator Pump Well
- Brass Pipe Plug - (1/8" N.P.T.)
- Idle Vent Valve Lever - 1967-69 Rochester Quadrajets
- Mixture Control Solenoid Plunger - GM
- Power Piston (APT) Metering Adjustment Screw
- Quadrajet Accelerator Pump Arm Casting Repair
- Quadrajet Float Bowl Insert- for carbs with M.C.S. (OEM #1705947
- Return Spring - Black
- Return Spring - Black, Short
- Return Springs - Dual
- Secondary Metering Well Plugs, 7/16" O-ringed plug
- Spring for APT Power Piston Metering Adjustment
- Throttle Blade, 1.375" - Rochester Quadrajet & Varajet
- Throttle Blade, 1.375" - Rochester Quadrajet & Varajet (Aluminum
- Throttle Lever Bushing & Grommet kit- Rochester, Carter, Holley
- Throttle Return Spring Kit - 5 Springs
Quadrajet Needle & Seats
- Needle and Seat Assembly - Non-Windowed, .115"
- Needle and Seat Assembly - Non-Windowed, .124"
- Needle and Seat Assembly - Non-Windowed, .132"
- Needle and Seat Assembly - Non-Windowed, .145"
- Needle and Seat Assembly, .110" diameter
- Needle and Seat Assembly, .125" diameter
- Needle and Seat Assembly, .135"diameter
- Needle and Seat Assembly, .145" diameter
- Needle and Seat Assembly, .150" diameter
- Needle and Seat Assembly, early style w/2 screws
- Needle and Seat Assembly, early style w/O-Rings
- Needle and Seat Repair Assembly, Repairs stripped needle and sea
Quadrajet Plugs & Expansion Cups
- Expansion Plug 1/2" (Qty:5)
- Expansion Plug 3/8" (Qty:5)
- Expansion Plug 5/16" (Qty:5)
Quadrajet Power Piston
- Adjustable Part Throttle (APT) Screw, for power piston adjustmen
- Mixture Control Solenoid Plunger - GM
- Power Piston (APT) Metering Adjustment Screw
- Quadrajet / Dualjet Power Piston Retaining Bushing
- Quadrajet / Dualjet Power Piston Spring Assortment, 4 color code
- Quadrajet / Dualjet Primary Rod Retaining Spring, fits early sty
- Quadrajet / Dualjet Primary Rod Retaining Spring, fits later sty
- Quadrajet / Dualjet Springs for Primary Metering Rods (2 springs
- Retaining Clip for Quadrajet Power Piston
- Spring for APT Power Piston Metering Adjustment
- USED - Lean Mixture Screw Spring
Quadrajet Pull-Offs
- Quadrajet Front Pull-Offs
- Quadrajet Rear Pull-Offs
Quadrajet Screws, Clips, Retaine
- Adjustable Part Throttle (APT) Screw, for power piston adjustmen
- Check Balls / Plug, 5 pack of 19/64 lead balls
- Check Balls, Accelerator Pump, 5 pack of 3/16 steel balls
- Choke Cover Pop Rivets, OEM # 17059739
- Choke Cover Retainers
- Choke Cover Retainers, OEM # 17057570
- Fasteners- Complete Quadrajet Carburetor Kit, for 1965-66 Quadra
- Fasteners- Complete Quadrajet Carburetor Kit, for 1967-74 Q-Jets
- Fasteners- Complete Quadrajet Carburetor Kit, for 1975-79 Q-Jets
- Fasteners- Complete Quadrajet Carburetor Kit, for carburetors st
- Fasteners- Oversized Screws for Throttle Shaft Repair - 20 Pack
- Fasteners- Quadrajet Carburetor to Intake Manifold Bolt Kit
- Fasteners- Screw for Primary Throttle Shaft, Button Head Design
- Fasteners- Throttle Plate Screws, 20 Pack
- Plug for Mixture Control Solenoid
- Power Piston (APT) Metering Adjustment Screw
- Quadrajet Secondary Throttle Shaft Spring
- Quadrajet TPS Stem & Accelerator Pump Retainer, package of 5
- Retainer - E-Clip - .125", 1/8", package of 10
- Retainer (LH) Rod Clip (OEM #7003242)
- Retainer (RH) Rod Clip (OEM #7003137)
- Retainer Pin, package of 10
- Retainer Pin, package of 10
- Retainer, Rod-Clip, package of 10 (OEM # 7005032)
- Retainer, Rod-Clip, package of 10 (OEM # 7005109)
- Retaining Clip for Throttle Cable
- Retaining Clips, package of 5
- Retaining Clips, package of 5
- Return Spring - Black
- Return Spring - Black, Short
- Return Springs - Dual
- Roll Pins, Accelerator Pump and Lever Hinge, 5-Pack
- Screws for Bowl Cover / Airhorn - 10-32 x 7/8"
- Screws for Throttle Shaft, Choke & Air Valves - 6-32 X 5/16"
- Spring for APT Power Piston Metering Adjustment
- Thermostat Cover (Choke) Screws, OEM #7010424
- Thermostat Cover (Choke) Screws, Self Tapping
- Throttle Lever 1/4" Ball Stud, 5/16 Thread
- Throttle Lever 7/32" Ball Stud
- Throttle Lever Stud
- Throttle Lever Stud
- Throttle Lever Stud / Trans Kickdown
- Triangular Retainer
- USED - Screw & Spring, Curb Idle Adjustment, Quadrajet
- USED - Screw, Fast Idle Cam Lever (Thick Body)
- USED - Screw, Fast Idle Cam Lever (Thin Body)
- USED - Screw, Solenoid / Vacuum Break Attachment Screw (Large-Ph
- USED - Screw, Solenoid / Vacuum Break Attachment Screw (Large-Sl
- USED - Screw, Solenoid / Vacuum Break Attachment Screw (Large-To
- USED - Screw, Vacuum Break Attachment Screw
- USED - Screw, Vacuum Break Attachment Screw (Torx Head)
- USED- Accelerator Pump Discharge Ball Retainer
Quadrajet Services
- Service- Fuel Inlet Thread Repair, Heli-Coil Installation, 1" In
- Service- Fuel Inlet Thread Repair, Heli-Coil Installation, 7/8"-
- Service- Installation of Primary Throttle Shaft Bushings
- Service- Installation of Secondary Throttle Shaft Bushings
Quadrajet Solenoids, Dash Pots
- Carb Dash Pot Assembly - GM 1965-66, NOS #7032503
- Dash Pot - Chevrolet, Oldsmobile 1965-67
- Idle Solenoid - 1975-82 GM
- Idle Solenoid - 1976-79 GM
- Idle Solenoid - 1977-89 GM
- Idle Solenoid - 1980-83 GM
- Idle Solenoid - GM 1977-78, OEM # 1997461
Quadrajet Throttle Shaft Bushing
- 3/8" Carburetor Throttle Shaft Bushings, 10 pack
- 5/16" Quadrajet Carburetor Primary Throttle Shaft Bushings, 10 p
- Carburetor Bushing Installation Kit - 3/8" throttle shafts, Quad
- Carburetor Bushing Installation Kit, for 5/16" Carburetor Thrott
- Fasteners- Throttle Plate Screws, 20 Pack
Quadrajet Tools
- 15x Folding Magnifier, Triple Lens
- 61-80 Drill Bit Set in Metal Case
- Carburetor Bushing Installation Kit - 3/8" throttle shafts, Quad
- Carburetor Bushing Installation Kit, for 5/16" Carburetor Thrott
- Carburetor Idle Mixture Adjusting Tool
- Fuel Inlet 1"-20 Threaded Insert Coils- (5 pack)
- Fuel Inlet 7/8"-20 Threaded Insert Coils- (5 pack)
- GM Computerized Idle Speed Control Adjusting Tool
- Pin Vise
- Scale for Weighing Carburetor Floats
- Secondary Air Valve Adjustment Hex Key
- Small Parts Plastic Storage Bin - 18 Compartments
- Threaded Carburetor Insert Installation Kit for 1"-20 inlet fitt
- Threaded Carburetor Insert Installation Kit for 7/8"-20 inlet fi
- Threading Tap for Air Cleaner Stud Threads
- Threading Tap for Needle & Seat
- Threading Tap for Primary Jets & Accelerator Pump Check Ball Plu
- Threading Tap for QJ & 4G Airhorn to Body & QJ Base to Body Thre
- Threading Tap for QJ Airhorn to Body Threads, Tapered Headed Scr
- Threading Tap for Throttle Shaft Screws
- Torx Bit Set- T7,T8,T9,T10,T15,T20,T25
Quadrajet Tubes & Vents
- Air Bleed Restrictors, .047" orifice x .125" OD x .108" L
- Air Bleed Restrictors, .047" orifice x .137" OD x .110" L
- Air Horn Vent, 3/8" OD x 1" L
- Brass Tube - .250" OD x 1.13" L
- Brass Tube - 3/16" OD x 1.91" L
- Brass Tube .093" OD x 1.21" Length
- Brass Tube .187" OD x 1.18" Length
- Brass Tube .315" OD x 1.27" Length
- High Speed Enrichment Tubes, 5/32" OD x 1-31/32" L
- Idle Pickup Tubes, .035" orifice x 1-1/2"
- Metal Tube .276" OD x 1" Length
- Metal Tube .375" OD x 1.36" Length
- Metal Vacuum Tee, 3/16"x 1/4" x 1/4"
- POE Pickup Tubes, 5/32" OD x 1-15/16" L
- Secondary Main Well Bleed Tubes, .042" orifice x 1-27/32 L"
- Secondary Pickup Tubes, 1/8" OD x 1-7/16" L
- Shaped Tee Vacuum Connector, bent tube 3/16" x 1/4" x 1/4"
- Slashed 45 Degree Vent Tube, 3/8" OD x 1" L
- Smog Tube, .600" OD to .510" OD x 1.3" L
- Steel Tube - .250" OD x 1.16" L
- Steel Tube - .250" OD x 1.88 Length
- Stepped Brass Tube - Rochester
- Tube, .552" OD x .480" ID x 1.600"' L
- Vacuum Brake Tube, 3/16" OD x 1/4" OD x 1-7/8" L
- Vacuum Connector, 1/4" OD x 1.00" L
- Vacuum Tee Connectors (3 way) 3/16" (Pack of 5)
- Vacuum Tube - 3/16" OD x 1" L
- Vacuum Tube - 3/16" OD / 1/4" OD x 1.4" L
- Vacuum Tube - OD.382" x 1.71" Length
- Vacuum Tube, 3/16" OD to 1/4" OD x 1" L
USED Q-Jet Parts
- Accelerator Pump Levers
  - Idle Vent Valve Lever - 1967-69 Rochester Quadrajets
  - USED- Accelerator Pump Lever # 26139
  - USED- Accelerator Pump Lever # 29834
  - USED- Accelerator Pump Lever # 30570
  - USED- Accelerator Pump Lever # 33727
  - USED- Accelerator Pump Lever # 37309
  - USED- Accelerator Pump Lever # 40510
  - USED- Accelerator Pump Lever # 48028
  - USED- Accelerator Pump Lever # 48168
  - USED- Accelerator Pump Lever # 48169
  - USED- Accelerator Pump Lever # 7029834
  - USED- Accelerator Pump Lever # 7033727
- Air Horn Baffles
  - USED - Air Horn Baffle #43000
  - USED - Air Horn Baffle #57154
- Cam Follower Levers
  - USED- Cam Follower Lever - OEM # 35409
  - USED- Cam Follower Lever - OEM # 37429
  - USED- Cam Follower Lever - OEM # 38298
  - USED- Cam Follower Lever - OEM # 41497
  - USED- Cam Follower Lever - OEM # 43634
- Carburetor Cores
  - USED Carburetor Core- Carb # 1705XXXX
  - USED Carburetor Core- Carb # 1708XXXX
  - USED Carburetor Core- Carb # 702XXXX
  - USED Carburetor Core- Carb # 703XXXX
  - USED Carburetor Core- Carb # 704XXXX
- Choke Levers
  - USED- Choke Lever # 35257
  - USED- Choke Lever # 35852
  - USED- Choke Lever # 37256
  - USED- Choke Lever # 37304
  - USED- Choke Lever # 38729
  - USED- Choke Lever # 50729
  - USED- Choke Lever OEM# 4254
- Choke Plates
  - USED- Choke Plate - OEM # 31112
  - USED- Choke Plate - OEM # 32420
  - USED- Choke Plate - OEM # 35195
  - USED- Choke Plate - OEM # 36021
  - USED- Choke Plate - OEM # 38197
  - USED- Choke Plate - OEM # 41558
  - USED- Choke Plate - OEM # 48904
- Choke Shafts
  - USED- Choke Shaft # 31232
  - USED- Choke Shaft # 32339
  - USED- Choke Shaft # 33793
  - USED- Choke Shaft # 34378
  - USED- Choke Shaft # 35832
  - USED- Choke Shaft # 38856
  - USED- Choke Shaft # 40040
- Fast Idle Cams
  - USED - Fast Idle Cam- Rochester # "A" / 6634
  - USED - Fast Idle Cam- Rochester # "AL" / 0673
  - USED - Fast Idle Cam- Rochester # "E" / 6633
  - USED - Fast Idle Cam- Rochester # "H" / 4140
  - USED - Fast Idle Cam- Rochester # "T" / 2372
  - USED - Fast Idle Cam- Rochester # 1154 / "Y"
  - USED - Fast Idle Cam- Rochester # 1154/1176
  - USED - Fast Idle Cam- Rochester # 1244/1245
  - USED - Fast Idle Cam- Rochester # 1484 / 1486
  - USED - Fast Idle Cam- Rochester # 2900/2901
  - USED - Fast Idle Cam- Rochester # 35199 / 35200
  - USED - Fast Idle Cam- Rochester # 40800 / 40802
  - USED - Fast Idle Cam- Rochester # 40809 / 40813
  - USED - Fast Idle Cam- Rochester # 40811 / 40815
  - USED - Fast Idle Cam- Rochester # 40820 / 40821
  - USED - Fast Idle Cam- Rochester # 40985/40986
  - USED - Fast Idle Cam- Rochester # 43753 / 43754
  - USED - Fast Idle Cam- Rochester # 44873 / 44877
  - USED - Fast Idle Cam- Rochester # 47290 / 47378
  - USED - Fast Idle Cam- Rochester # 47387/47388
  - USED - Fast Idle Cam- Rochester # 47703/47705
  - USED - Fast Idle Cam- Rochester # 47876 / 47877
  - USED - Fast Idle Cam- Rochester # 48961/48962
  - USED - Fast Idle Cam- Rochester # 51017/51019
  - USED - Fast Idle Cam- Rochester # 6631/6633
- Fast Idle Levers
  - USED - Fast Idle Lever- Rochester # 7030677
  - USED - Fast Idle Lever- Rochester # 7031933
  - USED - Fast Idle Lever- Rochester # 7035774
  - USED - Fast Idle Lever- Rochester # 7035806
  - USED - Fast Idle Lever- Rochester # 7035998
  - USED - Fast Idle Lever- Rochester # 7038299
  - USED - Fast Idle Lever- Rochester # 7041498
- Fittings
  - USED- Fuel Inlet Fitting - 1"- 20 Thread x 5/8"-18 (Original Roc
  - USED- Vacuum Fitting - 1/4"-18 Pipe Thread x 5/16" Barb
  - USED- Vacuum Fitting - 1/8"-27 Pipe Thread x 5/16" Barb
  - USED- Vacuum Fitting/ Brake Booster - 1/4"-18 Pipe Thread x 5/8"
- Float Bowl Inserts
  - Quadrajet Float Bowl Insert- for carbs with M.C.S. (OEM #1705947
  - USED- Float Bowl Insert- #29983
  - USED- Float Bowl Insert- #7034361
  - USED- Float Bowl Insert- #7037319
  - USED- Float Bowl Insert- #7041471
- Float Hinge Pins
  - USED- Float Hinge Pin- # 17057077
  - USED- Float Hinge Pin- # 7037317
  - USED- Float Hinge Pin- # 7041469
  - USED- Float Hinge Pin- 7029856
- Idle Solenoid Brackets
  - USED - Idle Solenoid Bracket- 1976-78 Pontiac
- Linkage
  - Accelerator Pump
    - USED- Accelerator Pump Rod, (Large Diameter)
  - Secondary
    - USED- Secondary Throttle Rod, Quadrajet
- Misc. Parts
  - USED - APT Metering Rod w/ Filler Spool
  - USED - Idle Compensator Bi-Metal Assembly
  - USED - TPS Adjusting Screw - Rochester
  - USED - TPS Plunger - Rochester Quadrajet, Dualjet
  - USED - TPS Plunger - Rochester Varajet
  - USED - TPS Spring - Rochester Quadrajet, Dualjet, Varajet
  - USED- Accelerator Pump Discharge Ball Retainer
  - USED- APT Aneroid Insert - OEM #7044330
  - USED- APT Aneroid Insert #4
  - USED- Throttle Blades, 1.375" - Rochester Quadrajet Primary
- Power Pistons
  - Used - Auxiliary Power Piston (1975-76) OEM # 7037851
  - USED - Lean Mixture Screw Spring
  - USED - Lean Mixture Solenoid Screw
  - Used - Power Piston, Long
  - Used - Power Piston, Long - no Pin (uses retaining bushing)
  - Used - Power Piston, Long (1965-67 early style - no Pin)
  - Used - Power Piston, Longer Pin
  - Used - Power Piston, Short (later style)
  - Used - Power Piston, Short w/Pin (later style)
- Primary Rods
  - Used - "B" 34B - Quadrajet / Dualjet Primary Metering Rods, .034
  - USED - "B" 37B - Quadrajet / Dualjet Primary Metering Rods, .036
  - Used - "B" 38B - Quadrajet / Dualjet Primary Metering Rods, .038
  - Used - "B" 39B - Quadrajet / Dualjet Primary Metering Rods, .039
  - Used - "B" 41B - Quadrajet / Dualjet Primary Metering Rods, .041
  - Used - "C" 42C - Quadrajet / Dualjet Primary Metering Rods, .042
  - Used - "C" 43C - Quadrajet / Dualjet Primary Metering Rods, .043
  - Used - "C" 49C - Quadrajet / Dualjet Primary Metering Rods, .049
  - Used - "C" 53C - Quadrajet / Dualjet Primary Metering Rods, .053
  - Used - "K" 40K - Quadrajet / Dualjet Primary Metering Rods, .040
  - Used - "K" 42K - Quadrajet / Dualjet Primary Metering Rods, .042
  - Used - "K" 43K - Quadrajet / Dualjet Primary Metering Rods, .043
  - Used - "K" 45K - Quadrajet / Dualjet Primary Metering Rods, .045
  - USED - "K" 46K - Quadrajet / Dualjet Primary Metering Rods, .045
  - Used - "K" 49K - Quadrajet / Dualjet Primary Metering Rods, .049
  - Used - "K" 52K - Quadrajet / Dualjet Primary Metering Rods, .052
  - Used - "M" 48M - Quadrajet / Dualjet Primary Metering Rods, .048
  - Used - "M" 49M - Quadrajet / Dualjet Primary Metering Rods, .049
  - Used - "M" 50M - Quadrajet / Dualjet Primary Metering Rods, .050
  - Used - "M" 51M - Quadrajet / Dualjet Primary Metering Rods, .051
  - Used - "M" 55M - Quadrajet / Dualjet Primary Metering Rods, .055
  - Used - "P" 54P - Quadrajet / Dualjet Primary Metering Rods, .054
  - Used - "S" 58S - Quadrajet / Dualjet Primary Metering Rods, .058
  - Used - "U" 49U (CCC) - Quadrajet / Dualjet Primary Metering Rods
  - Used - "U" 53U (CCC) - Quadrajet / Dualjet Primary Metering Rods
  - Used - "U" 55U (CCC) - Quadrajet / Dualjet Primary Metering Rods
  - Used - "U" 56U (CCC) - Quadrajet / Dualjet Primary Metering Rods
  - Used - "U" 57U (CCC) - Quadrajet / Dualjet Primary Metering Rods
  - Used - "U" 58U (CCC) - Quadrajet / Dualjet Primary Metering Rods
  - Used - "U" 60U (CCC) - Quadrajet / Dualjet Primary Metering Rods
  - Used - "U" 62U (CCC) - Quadrajet / Dualjet Primary Metering Rods
  - Used - 43 - Quadrajet / Dualjet Primary Metering Rods, .043"/.02
  - Used - 44 - Quadrajet / Dualjet Primary Metering Rods, .044"/.02
  - Used - 45 - Quadrajet / Dualjet Primary Metering Rods, .045"/.02
  - Used - Auxiliary Metering Rod - "35B" Quadrajet (Single)
  - Used - Auxiliary Metering Rod - "50B" Quadrajet (Single)
- Screws
  - USED - Lean Mixture Solenoid Screw
  - USED - Screw & Spring, Curb Idle Adjustment, Quadrajet
  - USED - Screw, Fast Idle Cam Lever (Thick Body)
  - USED - Screw, Fast Idle Cam Lever (Thin Body)
  - USED - Screw, Solenoid / Vacuum Break Attachment Screw (Large-Ph
  - USED - Screw, Solenoid / Vacuum Break Attachment Screw (Large-Sl
  - USED - Screw, Solenoid / Vacuum Break Attachment Screw (Large-To
  - USED - Screw, Vacuum Break Attachment Screw
  - USED - Screw, Vacuum Break Attachment Screw (Torx Head)
  - USED - TPS Adjusting Screw - Rochester
  - USED- Accelerator Pump Discharge Ball Retainer
- Sec. Lockout Levers
  - USED- Secondary Air Valve Lockout Lever #7031393
  - USED- Secondary Air Valve Lockout Lever #7037361
  - USED- Secondary Lockout Lever
  - USED- Secondary Lockout Lever #7027270
  - USED- Secondary Lockout Lever #7029868
- Secondary Hangers
  - USED - Quadrajet Secondary Hanger H (.550")
  - USED - Quadrajet Secondary Hanger I (.555")
  - USED - Quadrajet Secondary Hanger J (.560")
  - USED - Quadrajet Secondary Hanger L (.570")
  - USED - Quadrajet Secondary Hanger M (.575")
  - USED - Quadrajet Secondary Hanger N (.580")
  - USED - Quadrajet Secondary Hanger O (.585")
  - USED - Quadrajet Secondary Hanger R (.595")
  - USED - Quadrajet Secondary Hanger S (.600")
  - USED - Quadrajet Secondary Hanger T (.605")
  - USED - Quadrajet Secondary Hanger V (.615")
- Secondary Parts
  - Misc. Secondary Items
  - Secondary Air Flaps
  - Secondary Baffle Plates
    - USED- Secondary Baffle Plate
    - USED- Secondary Baffle Plate #31367
  - Secondary Levers
- Secondary Rods
  - Used - 147 - Quadrajet Secondary Metering Rods, .0556" tip
  - Used - 19 - Quadrajet Secondary Metering Rods, .0590" tip
  - Used - AK - Quadrajet Secondary Metering Rods, .0567" tip
  - Used - AN - Quadrajet Secondary Metering Rods, .0697" tip
  - Used - AV - Quadrajet Secondary Metering Rods, .0567" tip
  - Used - AV - Quadrajet Secondary Metering Rods, .0567" tip
  - Used - BG - Quadrajet Secondary Metering Rods, .0397" tip
  - Used - BG - Quadrajet Secondary Metering Rods, .0397" tip
  - Used - BP - Quadrajet Secondary Metering Rods, .0397" tip
  - Used - CF - Quadrajet Secondary Metering Rods, .0337" tip
  - Used - CG - Quadrajet Secondary Metering Rods, .0774" tip
  - Used - CH - Quadrajet Secondary Metering Rods, .0567" tip
  - Used - CH - Quadrajet Secondary Metering Rods, .0567" tip
  - Used - CJ - Quadrajet Secondary Metering Rods, .0397" tip
  - Used - CN - Quadrajet Secondary Metering Rods, .0567" tip
  - Used - CP - Quadrajet Secondary Metering Rods, .0567" tip
  - Used - CR - Quadrajet Secondary Metering Rods, .0547" tip
  - Used - CS - Quadrajet Secondary Metering Rods, .0397" tip
  - Used - DB - Quadrajet Secondary Metering Rods, .0697" tip
  - Used - DD - Quadrajet Secondary Metering Rods, .1047" tip
  - Used - DG - Quadrajet Secondary Metering Rods, .0337" tip
  - Used - DH - Quadrajet Secondary Metering Rods, .0567" tip
  - Used - DK - Quadrajet Secondary Metering Rods, .0567" tip
  - Used - DP - Quadrajet Secondary Metering Rods, .0686" tip
  - Used - DR - Quadrajet Secondary Metering Rods, .0570" tip
  - Used - EF - Quadrajet Secondary Metering Rods, .0567" tip
  - Used - EF - Quadrajet Secondary Metering Rods, .0567" tip
  - Used - EK - Quadrajet Secondary Metering Rods, .0567" tip
- Springs
  - USED - Lean Mixture Screw Spring
  - USED - Mixture Control Solenoid Plunger Spring
  - USED - Quadrajet Primary Throttle Shaft Spring
  - USED - Quadrajet Primary Throttle Shaft Spring (2 coils)
  - USED - Quadrajet Secondary Throttle Shaft Spring (Inner)
  - USED - Quadrajet Secondary Throttle Shaft Spring (Outer)
  - USED - TPS Spring - Rochester Quadrajet, Dualjet, Varajet
- Vacuum Break Brackets
  - USED- Vacuum Break Bracket # 38731
  - USED- Vacuum Break Bracket # 40297

- OR -

Key in your search data and then press the Enter key.

USED - Idle Compensator Bi-Metal AssemblyOur Part # U-ICC-1

$7.99

USED - Idle Compensator Bi-Metal Assembly
Our Part # U-ICC-1