QuadrajetParts.com - Carburetor Parts Superstore
Carburetor Parts & Rebuild Kits for Carter, Holley, Ford, Rochester & Stromberg.
ECM Connector to Bowl Cover Gaskets (5-Pack)
Electronic Control Module (ECM) Connector to Bowl Cover Gaskets.
Qty: 5 rubber gaskets
Thickness: .125"…see more
- Part Number
- 1736
ECM Connector to Bowl Cover Gaskets. (5-Pack)
Rochester products part # 17062508...see more
Electronic Control Module (ECM) Connector to Bowl Cover Gaskets.
Rochester products part # 17062508
Qty: 5 rubber gaskets
Thickness: .060"…see more
- Part Number
- 1734
ECM Connector to Bowl Cover Gaskets. (5-Pack)
Rochester products part # 17063597...see more
Electronic Control Module (ECM) Connector to Bowl Cover Gaskets.
Rochester products part # 17063597
Qty: 5 rubber gaskets
Thickness: .125"…see more
- Part Number
- 1735
EFE Carburetor Heater - GM 1984 w/ 2.0L 1bbl #14072739
Fits:
GM 1984 1.6L All Models
Cadillac 1984 1.6L All Models
Buick 1984 1.6L All Models
Chevrolet 1984 1.6L All Models
Oldsmobile 1984 1.6L All Models
Pontiac 1984 1.6L All Models
May fit other applications too.
Replaces GM/AC Delco OEM Heater #: 14072729, 14072740
Quantity: 1
Specifications:
3 bolt intake manifold pattern
Aluminum/spacer thickness: .285"
Single wire connector
Very limited quantities available.
The EFE (Early Fuel Evaporation) heaters purpose is to aid with vaporization of fuel in cold conditions, reduces emissions. A malfunctioning EFE heater will cause poor driveability and reduced fuel economy.
The EFE heater is located between carburetor and intake manifold.…see more
- Part Number
- 5311
EFE Carburetor Heater - Rochester Varajet
Fits:
GM GM 1982 1.8L All Models w/ Varajet carburetor
Chevrolet truck 1983-84
GMC truck 1983-84
May fit other applications too.
Replaces AC Delco OEM Heater #: 14018761
Quantity: 1
Specifications:
Carburetor bolt pattern: 2.1" x 2.9" x 4.85"
3 bolt intake manifold pattern
Gasket/spacer thickness: 1"
Black single wire connector
Very limited quantities available.
The EFE (Early Fuel Evaporation) heaters purpose is to aid with vaporization of fuel in cold conditions, reduce emissions. A malfunctioning EFE heater will cause poor driveability and reduced fuel economy.
The EFE heater is located between carburetor and intake manifold.…see more
- Part Number
- 5303
EFE Carburetor Heater Gasket - Rochester Quadrajet
Fits:
NOS Delco # 25518521
Made in Canada
Quantity: 1
Specifications:
Overall depth including heater element: 1.14"
Gasket/spacer thickness: .270"
Rare, Very limited quantities available.
The EFE (Early Fuel Evaporation) heaters purpose is to aid with vaporization of fuel in cold conditions, reduces emissions. A malfunctioning EFE heater will cause poor driveability and reduced fuel economy.
The EFE heater is located between carburetor and intake manifold.…see more
- Part Number
- 5309
Electric Choke Conversion Kit- For Pontiac 1968-72 Quadrajet Car
NEW Breakthrough Design - Patent Pending
Electric choke kit converts all 1968 thru 1972 Pontiac carburetors regardless of type of engine. Works fine on aftermarket intake manifolds. This conversion choke mounts solely on the carburetor, so it makes no difference what engine the Pontiac carburetor is mounted on.
Complete instructions included.
Kit contains:
Electric choke coil, flat terminal (1)
Locating bracket (1)
3” outer ring (1)
Hex standoffs (3)
#6-32x.25 php screw (3)
#6-32x.5 php screw (2)
#6-32x.188 flathead screw (1)
#8-32x.188 php screw (2)
#8-32x.5 set screw (1)
Plastic Cap (1)
Detailed instructions
Tools required:
Philips screwdriver
¼” wrench, socket and driver
Needle nose locking pliers
Electric hand drill
Drill bits 11/64”, 9/64”, 7/64", 3/32”, 1/16”
Taps #8-32, #6-32
5/64" Allen key
Loctite threadlocker
Efficient choke operation affects fuel economy during the first 5 miles of driving after starting the engine.
Applications:
All Makes and models with 1968-72 Pontiac Rochester Quadrajet Carburetor.
All factory and after market intake manifolds with 1968-72 Pontiac Rochester Quadrajet Carburetor.
For example: A non-Pontiac engine using a 68-72 Pontiac divorced choke style carburetor.
Note:
This choke kit is designed for use with ONLY 1968, 1969, 1970, 1971 and 1972 Pontiac Quadrajet carburetors.
Electric Choke Conversion Kit is not returnable if original packaging is opened.…see more
- Part Number
- 1223A
Electric Choke Thermostat
Originally fit:
FORD (8) 1980 (Ford 2bbl)
LINCOLN (8) 1980 (Ford 2bbl)
MERCURY (8) 1980 (Ford 2bbl)
FORD (6) 1978-80 (Carter 1bbl)
FORD TRUCK (6) 1978-86 (Carter 1bbl)
MERCURY (6) 1978-80 (Carter 1bbl)
Stock replacement assembly with OEM style terminal.
Note:
When element is heated the bi-metal spring winds up.
Fits:
Carter YF, YFA carburetors
Ford/Motorcraft 2700 VV carburetors
Ford/Motorcraft 7200 VV carburetors
Thermostat housing diameter: 2.175" (2 3/16")
Quantity: 1…see more
- Part Number
- 1256B
Electric Choke Thermostat - Carter BBD
Originally fit:
AMC (6) 258 cid - 1980
JEEP (6) 258 cid -1980
AMC/JEEP OEM Choke Numbers:
8132544, 8132548
Carter OEM Choke Numbers:
170-1578, 170-1596
Stock replacement assembly with common spade terminal.
Fits:
Carter BBD carburetors
Ford/Motorcraft carburetors
Holley carburetors
Note:
When 12v power is supplied to the choke and the element heats up, the bi-metal coil winds up. When the coil cools down, the coil un-winds.
Bi-metal coil can be carefully removed and flipped over to reverse coil rotation.
Thermostat housing diameter: 2.175" (2 3/16")
Quantity: 1…see more
- Part Number
- 1211J
Electric Choke Thermostat - Ford 2 & 4 BBL
Fits:
Ford/Motorcraft 2100, 2150 carburetors
Ford/Motorcraft 4100 carburetors
Originally used on: FORD (6, 8) 1973-83 FORD TRUCK (8) 1973-83 LINCOLN (8) 1973-80 MERCURY (6, 8) 1973-83
Carter OEM Number:170-1294, 170-1745, 170-1747, 170-1748, 170-1750, 170-1751, 170-1752, 170-1753, 170-1754, 170-1755, 170-1756, 170-1761, 170-1826, 170-1827, 170-1828, 170-1854
Ford OEM Number:D3AZ-9848-N, D4AZ-9848-A, D4TZ-9848-A, D5AZ-9848-A, D5AZ-9848-C, D5OZ-9848-A, D5VZ-9848-C, D7AZ-9848-A, D7AZ-9848-D, D7DZ-9848-A, D7FZ-9848-E, D7PZ-9848-D, D7TZ-9848-A, D84Z-9848-A, D9UZ-9848-A, E0BZ-9848-B, E0DZ-9848-A, E0TZ-9848-A, E2AZ-9848-B, E2BZ-9848-D, E2BZ-9848-G, E2TZ-9848-D High quality stock replacement assembly.
Thermostat diameter: 2.16" (2-3/16")
Quantity: 1
When 12v power is supplied to the choke and the element heats up, the bi-metal coil un-winds. When the coil cools down, the coil tightens up.
Note: Bi-metal coil can be carefully removed and flipped over to reverse coil rotation.
Note: Some early carburetor choke housings have a center stud / post that sticks out too far, This choke thermostat will not work unless stud/post length is reduced.…see more
- Part Number
- 1211K
Electric Choke Thermostat - Ford 2BBL
Originally fit:
FORD (6, 8) 1982-85
FORD TRUCK (6, 8) 1982-86
LINCOLN (6) 1983
MERCURY (6, 8) 1982-84
Carter OEM Choke Numbers:
170-1844, 170-1849, 170-1850, 170-1851, 170-1852
Ford/Motorcraft OEM Choke Numbers:
E2DZ-9848-B, E2SZ-9848-B, E2TZ-9848-A, E3AZ-9848-D, E3SZ-9848-B, E3TZ-9848-A, E3TZ-9848-B, E3TZ-9848-C, E3TZ-9848-D, E3TZ-9848-E, E3TZ-9848-F, E3TZ-9848-G, E3UZ-9848-A, E4TZ-9848-A
Stock replacement assembly with OEM style terminal.
Fits:
Ford/Motorcraft 2100 carburetors
Ford/Motorcraft 2150 carburetors
Note:
When 12v power is supplied to the choke and the element heats up, the bi-metal coil un-winds. When the coil cools down, the coil tightens up.
Bi-metal coil can be carefully removed and flipped over to reverse coil rotation.
Thermostat housing diameter: 2.175" (2 3/16")
Quantity: 1…see more
- Part Number
- 1211H
Electric Choke Thermostat - Holley
High quality stock replacement assembly with OEM style "L" shaped terminal on end of pigtail connector.
Quantity: 1
Thermostat diameter: 2"
Note:
When heated the bi-metal spring unwinds.…see more
- Part Number
- 1211M
Electric Choke Thermostat - Holley 4150
Fits:
Holley 4 bbl carburetors
Holley 4150 style carburetors
Originally used on:
FORD (8) 1983-85
FORD TRUCK (8) 1983-86
MERCURY (8) 1984-85
Carter OEM Number:170-1843
Ford OEM Number:E3PZ-9848-N, E4PZ-9848-F, E4PZ-9848-G, E5PZ-9848-A, E5PZ-9848-B, E6PZ-9848-B High quality stock replacement assembly.
Thermostat diameter: 2.16" (2-3/16")
When 12v power is supplied to the choke and the element heats up, the bi-metal coil un-winds. When the coil cools down, the coil tightens up.
Note: Bi-metal coil can be carefully removed and flipped over to reverse coil rotation.…see more
- Part Number
- 1211G
Electric Choke Thermostat - Holley 4180
Originally fit:
FORD TRUCK (8) 1983-85 All Models 7.5L(L) 460" (Holley 4 bbl)
Ford OEM Choke Numbers:
E3PZ-9848-E
Holley OEM Choke Numbers:
47R-692-ASK
Stock replacement assembly with spade terminal.
Fits:
Carter carburetors
Ford/Motorcraft carburetors
Holley 4180 carburetors
Note:
When 12v power is supplied to the choke and the element heats up, the bi-metal coil un-winds. When the coil cools down, the coil winds-up.
Bi-metal coil can be carefully removed and flipped over to reverse coil rotation.
Thermostat housing diameter: 2.175" (2 3/16")
Quantity: 1…see more
- Part Number
- 1211L
Electric Choke Thermostat - Rochester Varajet
High quality stock replacement assembly with OEM style "L" shaped terminal. When used with Pigtail wire connector 1331 or OEM connector, wire connector will lock positively on terminal.
Fits:
Rochester Varajet carburetors.
Thermostat diameter: 2 inches
When heated, the bi-metal spring winds up.
Quantity: 1
Note:
Choke coil spring can be carefully removed and flipped over and re-installed. This will allow coil to rotate in opposite direction if needed.
Note:
Clocking position (location of end of bi-metal coil spring) may be different than photo.
Note: Pigtail connector # 1331 or OEM connector is required.…see more
- Part Number
- 1211C
Electric Choke Thermostat - Rochester Varajet ("Flat" Terminal)
Replacement assembly with "Flat" shaped terminal. The flat terminal allows use of standard spade type electrical connection.
Fits:
Rochester Varajet carburetors.
When 12v power is supplied to the choke and the element heats up, the bi-metal coil tightens up. When the coil cools down, the coil un-winds.
Thermostat diameter: 2"
Quantity: 1
Note:
Choke coil spring can be carefully removed and flipped over and re-installed. This will allow coil to rotate in opposite direction if needed.
Note:
Clocking position (location of end of bi-metal coil spring) may be different than photo.
Note: Pigtail connector # 1331 or OEM connector can be used for a factory look, but the connectors locking/unlocking mechanism will be lost.…see more
- Part Number
- 1211D
Electric Choke Thermostat (<--LEAN)
Fits:
Carter carburetors
Holley carburetors
High quality stock replacement assembly.
Thermostat diameter: 2.16" (2-3/16")
When 12v power is supplied to the choke and the element heats up, the bi-metal coil un-winds. When the coil cools down, the coil tightens up.
Note: Bi-metal coil can be carefully removed and flipped over to reverse coil rotation.…see more
- Part Number
- 1211F
Electric Choke Thermostat Holley, Carter (--> LEAN)
OD: 2.160", Depth of...see more
Fits:
Carter AFB carburetors
Carter WCFB carburetors (May require bi-metal coil to be flipped over)
Carter YF, YFA carburetors
Edelbrock AFB carburetors
Holley 4000 carburetors (Bi-metal coil end may need to be bent into a circle to be able to push and pull the choke lever)
Holley 4150 carburetors (Universal Choke)
MERCURY MARINE carburetors (Mercury Choke OEM # 809066)
High quality stock replacement assembly.
Thermostat diameter: 2.16" (2-3/16")
Depth of case: .925"
When 12v power is supplied to the choke and the element heats up, the bi-metal coil winds-up. When the coil cools down, the coil un-winds.
Note: Bi-metal coil can be carefully removed and flipped over to reverse coil rotation.…see more
- Part Number
- 1254D
Electric Choke Thermostat Kit - Rochester
Includes 3 retainers and 3 screws....see more
High quality (USA made) stock replacement assembly with OEM style "L" shaped terminal. When used with Pigtail wire connector #1331 or OEM connector, wire connector will lock positively on terminal. Electric Choke Thermostat fits Rochester Quadrajet, Twojet and Dualjet carburetors. Can also be used on many 4G/Four-jet carburetors.
Includes:
1 Electric choke thermostat
3 retainers
3 screws
Note:
Screws included with this kit are 4214, OEM sized screws. If you are replacing a thermostat that is retained with pop rivets, you will need to purchase over sized/self tapping screws 4215 or replacement pop rivets 4216. Bi-metal coil design may differ from photo, but will function the same. When heated, bi-metal coil will wind-up. (rotating counter clockwise when viewed from backside of thermostat)
Thermostat diameter: 2-1/4"
Hot-Air Choke to Electric Choke Conversion:
This electric choke thermostat can be used to replace original hot-air thermostat, just run 12volts to the thermostat and remove original hot-air choke thermostat gasket.
Note: Pigtail connector #1331 or OEM connector is required.…see more
- Part Number
- 1211
Electric Choke Thermostat Kit - Rochester ("Flat" Terminal)
Includes 3 retainers and 3 screws....see more
USA made replacement assembly with "Flat" shaped terminal. The flat terminal allows use of standard spade type electrical connection. Electric Choke Thermostat fits Rochester Quadrajet, Twojet and Dualjet carburetors. Can also be used on many 4G/Four-jet carburetors.
When 12v power is supplied to the choke and the element heats up, the bi-metal coil tightens up. When the coil cools down, the coil un-winds.
Includes 3 retainers and 3 screws.
Note:
Screws included with this kit are 4215, over sized, self tapping screws.
Hot-Air Choke to Electric Choke Conversion:
This electric choke thermostat can be used to replace original hot-air thermostat, just run a 12 volt wire to a "keyed" power source and remove original hot-air choke thermostat gasket. A "keyed power source only receives power when the ignition key is turned on.
Thermostat diameter: 2-1/4"
Note: Pigtail connector # 1331 or OEM connector can be used for a factory look, but the connectors locking/unlocking mechanism will be lost.…see more
- Part Number
- 1211A
Electronic Choke Conversion Kit- BB Chevy 396-454
Easy to install electronic choke kit converts divorced choke carburetors to a solid state electronic choke. Contains everything you need: Electric choke thermostat...see more
Solid State Electronic Automatic Choke Kit-
BB Chevy 396-454
Easy to install electronic choke kit converts divorced choke carburetors to a solid state electronic choke. Contains everything you need: Electric choke thermostat housing assembly and mounting bracket, choke rod, heat sensor, wiring and detailed instructions.
Efficient choke operation affects fuel economy during the first 5 miles of driving after starting the engine.
Note: Choke rod moves up when thermostat element heats up.
Applications:
Chevrolet 1970-1971, 396-454 with Rochester Quadrajet
Chevrolet 1972-1973-1974, 454 with Rochester Quadrajet
Chevrolet Truck 1970, 396 with Rochester Quadrajet
Chevrolet Truck 1971-1972, 402 with Rochester Quadrajet
Chevrolet Truck 1973-1974-1975, 454 with Rochester Quadrajet
GMC Truck 1973-1975-1976, 454 with Rochester Quadrajet
May fit other applications also.
Note:
This choke kit is designed for use with original intake manifolds from applications listed above. It may or may not fit on aftermarket or different year/application intake manifolds. Aftermarket intakes may require the choke thermostat bracket and/or intake manifold to be modified and altered in order to mount electric choke to intake manifold.
Identification Help: This conversion kit is designed for intake manifolds that originally were equipted with a divorced choke style with mounting points similar to our part #1201.
Electronic Choke Conversion Kit is not returnable if original packaging is opened.
Choke Measurements:
Distance from center of mounting screw hole to locating tab: .950"
Mounting flange to top of choke assembly: 2.4" high
Width of unit: approx. 2.9"
Width of unit from center of mounting screw: 2.2" & 0.7"
Depth of unit (mounting screw to electrical connectors): approx. 2.5"
Diameter of electric choke plastic housing: 2 1/8"
Length of choke rod: 1.2"
Height of choke rod at upper limit: approx 3.9" (from flange)
Height of choke rod at lower limit: approx 2.4" (from flange)
Flange offset: .330" raised above flange mounting point…see more
- Part Number
- 1221
Electronic Choke Conversion Kit- Buick 455 1972-74
Solid State Electronic Automatic Choke Kit-
Easy to install electronic choke kit converts remote/divorced choke carburetors to a solid state electronic choke. Contains everything you need: Electric choke thermostat housing assembly and mounting bracket, choke rod, heat sensor, wiring and detailed instructions.
Efficient choke operation affects fuel economy during the first 5 miles of driving after starting the engine.
Note:
Choke rod moves down when thermostat element heats up.
Mounting hole distance: 3.1" (center to center)
Applications:
All Buick 1972-74, 455 engine with Rochester Quadrajet
Note:
This choke kit is designed for use with original intake manifolds from applications listed above. It may or may not fit on aftermarket or different year/application intake manifolds. Aftermarket intakes may require the choke thermostat bracket and/or intake manifold to be modified and altered in order to mount electric choke to intake manifold.
Electronic Choke Conversion Kit is not returnable if original packaging is opened.…see more
- Part Number
- 1221B
Electronic Choke Conversion Kit- Cadillac 1968-69
Solid State Electronic Automatic Choke Kit-
Easy to install electronic choke kit converts remote/divorced choke carburetors to a solid state electronic choke. Contains everything you need: Electric choke thermostat housing assembly and mounting bracket, choke rod, heat sensor, wiring and detailed instructions.
Efficient choke operation affects fuel economy during the first 5 miles of driving after starting the engine.
Note:
Choke rod moves down when thermostat element heats up.
Mounting hole distance: 3.0" (center to center)
Applications:
All Cadillac 1968-69, with Rochester Quadrajet Carburetor.
Note:
This choke kit is designed for use with original intake manifolds from applications listed above. It may or may not fit on aftermarket or different year/application intake manifolds. Aftermarket intakes may require the choke thermostat bracket and/or intake manifold to be modified and altered in order to mount electric choke to intake manifold.
Electronic Choke Conversion Kit is not returnable if original packaging is opened.…see more
- Part Number
- 1221C
Electronic Choke Conversion Kit- Chevrolet 1966-71 & 1978 w/ 4bb
Solid State Electronic Automatic Choke Kit-
Easy to install electronic choke kit converts remote/divorced choke carburetors to a solid state electronic choke. Contains everything you need: Electric choke thermostat housing assembly and mounting bracket, choke rod, heat sensor, wiring and detailed instructions.
Efficient choke operation affects fuel economy during the first 5 miles of driving after starting the engine.
Note:
Choke rod moves up when thermostat element heats up.
Applications:
Chevrolet 1971 350 with Rochester Quadrajet 4bbl Carburetor.
Chevrolet 1970 350 with Rochester Quadrajet 4bbl Carburetor.
Chevrolet 1969 350 with Rochester Quadrajet 4bbl Carburetor.
Chevrolet 1969 396, 427 with Rochester Quadrajet 4bbl Carburetor. **
Chevrolet 1968 327, 350 with Rochester Quadrajet 4bbl Carburetor.
Chevrolet 1968 396, 427 with Rochester Quadrajet 4bbl Carburetor. **
Chevrolet 1967 327, 350 with Rochester Quadrajet 4bbl Carburetor.
Chevrolet 1966 327 with Rochester Quadrajet 4bbl Carburetor.
Chevrolet Truck 1978 400 with Rochester Quadrajet 4bbl Carburetor.
** Control rod must be changed before installation for Big Block applications.
Note:
This Choke conversion kit (#1221P) is similar to choke conversion kit #1221L with exception to the direction the choke rod moves.
This choke kit is designed for use with original intake manifolds from applications listed above. It may or may not fit on aftermarket or different year/application intake manifolds. Aftermarket intakes may require the choke thermostat bracket and/or intake manifold to be modified and altered in order to mount electric choke to intake manifold.
Identification Help: This conversion kit is designed for intake manifolds that originally were equipped with a divorced choke style with mounting points similar to our part #1211S.
Electronic Choke Conversion Kit is not returnable if original packaging is opened.…see more
- Part Number
- 1221P
Electronic Choke Conversion Kit- Chevrolet Vega 1971-74
Solid State Electronic Automatic Choke Kit-
Easy to install electronic choke kit converts remote/divorced choke carburetors to a solid state electronic choke. Contains everything you need: Electric choke thermostat housing assembly and mounting bracket, choke rod, heat sensor, wiring and detailed instructions.
Efficient choke operation affects fuel economy during the first 5 miles of driving after starting the engine.
Note:
Choke rod moves down when thermostat element heats up.
Mounting hole distance: 2.05" (center to tab)
Applications:
Chevrolet Vega 1971-74, 4 cyl. with Rochester Mono-jet 1bbl Carburetor.
Chevrolet Vega 1971-74, 4 cyl. with Rochester Two-jet 2bbl Carburetor.
Note:
This choke kit is designed for use with original intake manifolds from applications listed above. It may or may not fit on aftermarket or different year/application intake manifolds. Aftermarket intakes may require the choke thermostat bracket and/or intake manifold to be modified and altered in order to mount electric choke to intake manifold.
Electronic Choke Conversion Kit is not returnable if original packaging is opened.…see more
- Part Number
- 1221A
Electronic Choke Conversion Kit- Chrysler 1974-79 w/ 318 CID
Solid State Electronic Automatic Choke Kit-
Easy to install electronic choke kit converts remote/divorced choke carburetors to a solid state electronic choke. Contains everything you need: Electric choke thermostat housing assembly and mounting bracket, choke rod, heat sensor, wiring and detailed instructions.
Efficient choke operation affects fuel economy during the first 5 miles of driving after starting the engine.
Note:
Choke rod moves down when thermostat element heats up.
Mounting hole distance: 2.75" (center to center)
Applications:
Chrysler 1974-79 318 with Carter BBD 2bbl Carburetor.
Note:
This choke kit is designed for use with original intake manifolds from applications listed above. It may or may not fit on aftermarket or different year/application intake manifolds. Aftermarket intakes may require the choke thermostat bracket and/or intake manifold to be modified and altered in order to mount electric choke to intake manifold.
Electronic Choke Conversion Kit is not returnable if original packaging is opened.…see more
- Part Number
- 1221E
Electronic Choke Conversion Kit- GM 1963-70 w/ 2bbl Rochester
Solid State Electronic Automatic Choke Kit-
Easy to install electronic choke kit converts remote/divorced choke carburetors to a solid state electronic choke. Contains everything you need: Electric choke thermostat housing assembly and mounting bracket, choke rod, heat sensor, wiring and detailed instructions.
Efficient choke operation affects fuel economy during the first 5 miles of driving after starting the engine.
Note:
Choke rod moves down when thermostat element heats up.
Applications:
Checker 1969 327 with Rochester Two-jet 2bbl Carburetor.
Checker 1970 350 with Rochester Two-jet 2bbl Carburetor.
Chevrolet 1963-70 283, 307, 327, 350, 400 with Rochester Two-jet 2bbl Carburetor.
Chevrolet 1969-70 307, 327, 350, 396, 400 with Rochester Two-jet 2bbl Carburetor.
Chevrolet Truck 1969 (all engines w/L.P. Gas) with Rochester Two-jet 2bbl Carburetor.
GMC Truck 1969 (all engines w/L.P. Gas) with Rochester Two-jet 2bbl Carburetor.
Note:
This choke kit is designed for use with original intake manifolds from applications listed above. It may or may not fit on aftermarket or different year/application intake manifolds. Aftermarket intakes may require the choke thermostat bracket and/or intake manifold to be modified and altered in order to mount electric choke to intake manifold.
Electronic Choke Conversion Kit is not returnable if original packaging is opened.…see more
- Part Number
- 1221H
Electronic Choke Conversion Kit- GM 1963-72 w/ 4 & 6 cyl. engine
Solid State Electronic Automatic Choke Kit-
Easy to install electronic choke kit converts remote/divorced choke carburetors to a solid state electronic choke. Contains everything you need: Electric choke thermostat housing assembly and mounting bracket, choke rod, heat sensor, wiring and detailed instructions.
Efficient choke operation affects fuel economy during the first 5 miles of driving after starting the engine.
Note:
Choke rod moves down when thermostat element heats up.
Mounting hole distance: .8" (center to center)
Applications:
Chevrolet 1963-71 194, 230, 252 with Rochester Mono-jet 1bbl Carburetor.
Chevrolet 1970 153 4 cyl. with Rochester Mono-jet 1bbl Carburetor.
Chevrolet 1970 153 4 cyl. with Rochester Mono-jet 1bbl Carburetor.
Chevrolet Truck 1969-70 (all engines) with Rochester Mono-jet 1bbl Carburetor.
Checker 1968-70 230, 250 with Rochester Mono-jet 1bbl Carburetor.
Checker 1972 250 with Rochester Mono-jet 1bbl Carburetor.
Buick 1968-71 250 with Rochester Mono-jet 1bbl Carburetor.
GMC Truck 1970-71 250, 292 with Rochester Mono-jet 1bbl Carburetor.
Oldsmobile 1966-71 250 with Rochester Mono-jet 1bbl Carburetor.
Pontiac 1968-71 250 with Rochester Mono-jet 1bbl Carburetor.
Note:
This choke kit is designed for use with original intake manifolds from applications listed above. It may or may not fit on aftermarket or different year/application intake manifolds. Aftermarket intakes may require the choke thermostat bracket and/or intake manifold to be modified and altered in order to mount electric choke to intake manifold.
Electronic Choke Conversion Kit is not returnable if original packaging is opened.…see more
- Part Number
- 1221D
Electronic Choke Conversion Kit- Mopar 1966-73 w/ 1bbl Carbureto
Solid State Electronic Automatic Choke Kit-
Easy to install electronic choke kit converts remote/divorced choke carburetors to a solid state electronic choke. Contains everything you need: Electric choke thermostat housing assembly and mounting bracket, choke rod, heat sensor, wiring and detailed instructions.
Efficient choke operation affects fuel economy during the first 5 miles of driving after starting the engine.
Note:
Choke rod moves down when thermostat element heats up.
Mounting hole distance: 2.4" (center to center)
Applications:
Dodge 1966-67 170, 225 with Carter BBS 1bbl Carburetor.
Dodge 1968-69 170, 225 with Holley 1920 1bbl Carburetor. (Except Taxi)
Dodge 1970-72 198, 225 with Carter BBS 1bbl Carburetor.
Dodge 1973 198, 225 with Holley 1920 1bbl Carburetor.
Dodge Truck 1966-71 170, 198, 225 with Holley 1920 1bbl Carburetor.
Dodge Truck 1966-71 225 with Carter BBS 1bbl Carburetor.
Dodge Truck 1972 with Holley 1920 1bbl Carburetor. (D, W-100) (B-300 Wagon Exc. 15 pass)
Dodge Truck 1972 with Carter BBS 1bbl Carburetor. (D, W, P-200, 300) (B-300 Van & 15 pass.)
Dodge Truck 1973 with Carter BBS 1bbl Carburetor. (D, W, P-200, 300) (D, W-100 Export) (B-300 Van & 15 pass.)
Plymouth 1966-72 170, 198, 225 with Carter BBS 1bbl Carburetor.
Plymouth 1966-72 170, 198, 225 with Holley 1920 1bbl Carburetor.
Note:
This choke kit is designed for use with original intake manifolds from applications listed above. It may or may not fit on aftermarket or different year/application intake manifolds. Aftermarket intakes may require the choke thermostat bracket and/or intake manifold to be modified and altered in order to mount electric choke to intake manifold.
Electronic Choke Conversion Kit is not returnable if original packaging is opened.…see more
- Part Number
- 1221G
Electronic Choke Conversion Kit- Mopar 1968-69 w/ 273, 318, 383
Solid State Electronic Automatic Choke Kit-
Easy to install electronic choke kit converts remote/divorced choke carburetors to a solid state electronic choke. Contains everything you need: Electric choke thermostat housing assembly and mounting bracket, choke rod, heat sensor, wiring and detailed instructions.
Efficient choke operation affects fuel economy during the first 5 miles of driving after starting the engine.
Note:
Choke rod moves down when thermostat element heats up.
Mounting hole distance: 2.75" (center to center)
Applications:
Mopar 1968-69 273, 318, 383 with Carter BBD 2bbl Carburetor.
Note:
This choke kit is designed for use with original intake manifolds from applications listed above. It may or may not fit on aftermarket or different year/application intake manifolds. Aftermarket intakes may require the choke thermostat bracket and/or intake manifold to be modified and altered in order to mount electric choke to intake manifold.
Electronic Choke Conversion Kit is not returnable if original packaging is opened.…see more
- Part Number
- 1221K
Electronic Choke Conversion Kit- Mopar 1973-79 w/ 1bbl Carbureto
Solid State Electronic Automatic Choke Kit-
Easy to install electronic choke kit converts remote/divorced choke carburetors to a solid state electronic choke. Contains everything you need: Electric choke thermostat housing assembly and mounting bracket, choke rod, heat sensor, wiring and detailed instructions.
Efficient choke operation affects fuel economy during the first 5 miles of driving after starting the engine.
Note:
Choke rod pulls towards the choke unit when thermostat element heats up.
Applications:
Dodge 1974 198, 225 with Holley 1bbl Carburetor.
Dodge 1975 225 with Holley 1bbl Carburetor.
Dodge Truck 1972 B-100, 200 Holley 1bbl Carburetor.
Dodge Truck 1973 (B-100, 200; D, W-100) with Holley 1bbl Carburetor.
Dodge Truck 1973 (B-300 Exc. 15 pass) with Carter BBS 1bbl Carburetor.
Dodge Truck 1974-75 225 with Carter BBS 1bbl Carburetor.
Plymouth 1973-75 198, 225 with Holley 1bbl Carburetor.
Chrysler Prod. 1976-79 225 with Holley 1bbl Carburetor.
Note:
This choke kit is designed for use with original intake manifolds from applications listed above. It may or may not fit on aftermarket or different year/application intake manifolds. Aftermarket intakes may require the choke thermostat bracket and/or intake manifold to be modified and altered in order to mount electric choke to intake manifold.
Electronic Choke Conversion Kit is not returnable if original packaging is opened.…see more
- Part Number
- 1221J
Electronic Choke Conversion Kit- SB Chevy 350-400 1971-78
Solid State Electronic Automatic Choke Kit-
SB Chevy 350-400
Easy to install electronic choke kit converts divorced choke carburetors to a solid state electronic choke. Contains everything you need: Electric choke thermostat housing assembly and mounting bracket, choke rod, heat sensor, wiring and detailed instructions.
Efficient choke operation affects fuel economy during the first 5 miles of driving after starting the engine.
Note: Choke rod moves up when thermostat element heats up.
Applications:
Checker 1973-1974, 350 with Rochester 2bbl
Chevrolet 1971-1972, 350 with Rochester Quadrajet
Chevrolet 1973-1974, 350-400 with Rochester Quadrajet
Chevrolet Truck 1971-1972-1973-1974-1975 & 1977, 350-350G-350P Calif. with Rochester Quadrajet
Chevrolet Truck 1973-1974-1975 & 1978, 400- 400K30 Calif. with Rochester Quadrajet
GMC Truck 1972-1973-1974-1975-1976-1977, 350 with Rochester Quadrajet
GMC Truck 1975-1976-1977-1978, 400- 400K30 Calif. with Rochester Quadrajet
Note:
This choke kit is designed for use with original intake manifolds from applications listed above. It may or may not fit on aftermarket or different year/application intake manifolds. Aftermarket intakes may require the choke thermostat bracket and/or intake manifold to be modified and altered in order to mount electric choke to intake manifold.
Identification Help: This conversion kit is designed for intake manifolds that originally were equipted with a divorced choke style with mounting points similar to our part #1208 & #1213.
Electronic Choke Conversion Kit is not returnable if original packaging is opened.…see more
- Part Number
- 1220
Enrichment Valve Cover Gasket
Also known as Economizer Cover Gasket
Quantity: 3
OEM Valve # 87A-9563-A, EOTZ-9563-A, CG-234
Fiber Gasket
ID: 1.15"
Fits:
Ford Motorcraft 2100 / 2150 carburetors
Ford Motorcraft 4100 carburetors …see more
- Part Number
- 1748G
Enrichment Valve/ Economizer Diaphragm Assembly - Holley
Holley OEM# 25R-166A, 25R-375A
Enrichment Valve/ Economizer Diaphragm Assembly
Fits:
Various Holley carburetors
Quantity: 1…see more
- Part Number
- 3664G
Enrichment/Power Valve Gasket (5-pak)
Fits:
Ford / Motorcraft 2100 carburetors
Ford / Motorcraft 2150 carburetors
Ford / Motorcraft 4100 carburetors
Holley carburetors
Quantity: 5 gaskets
Gasket outside diameter: 1"
Gasket inside diameter: .750"
Gasket thickness: .062"…see more
- Part Number
- 1748A
Ethanol Compatible 1/2" Fuel Hose (by the foot)
New 5-layer ethanol resistant 1/2" rubber fuel hose is newly designed to resist the alcohol/ethanol in todays new fuels. Compatible with E-85, Methanol, Ethanol, Gasoline and Gasohol.
Don't take a chance on inferior auto parts store rubber fuel hose that is not rated for use with todays new fuels.
Rated to 35 PSI
Select total length required, for example if you order a qty of 6 you will receive a 6 foot length of hose.…see more
- Part Number
- 4298F1/2
Ethanol Compatible 1/4" Fuel Hose (by the foot)
New 5-layer ethanol resistant 1/4" rubber fuel hose is newly designed to resist the alcohol/ethanol in todays new fuels. Compatible with E-85, Methanol, Ethanol, Gasoline and Gasohol....see more
New 5-layer ethanol resistant 1/4" rubber fuel hose is newly designed to resist the alcohol/ethanol in todays new fuels. Compatible with E-85, Methanol, Ethanol, Gasoline and Gasohol.
Don't take a chance on old outdated inferior rubber fuel hose that is not rated for use with todays new fuels.
Rated to 35 PSI
Select total length required, for example if you order a qty of 6 you will receive a 6 foot length of hose.…see more
- Part Number
- 4298F1/4
Ethanol Compatible 3/8" Fuel Hose (by the foot)
New 5-layer ethanol resistant 3/8" rubber fuel hose is newly designed to resist the alcohol/ethanol in todays new fuels. Compatible with E-85, Methanol, Ethanol, Gasoline and Gasohol....see more
New 5-layer ethanol resistant 3/8" rubber fuel hose is newly designed to resist the alcohol/ethanol in todays new fuels. Compatible with E-85, Methanol, Ethanol, Gasoline and Gasohol.
Don't take a chance on inferior auto parts store rubber fuel hose that is not rated for use with todays new fuels.
Rated to 50 PSI
Select total length required, for example if you order a qty of 6 you will receive a 6 foot length of hose.…see more
- Part Number
- 4298F3/8
Ethanol Compatible 5/16" Fuel Hose (by the foot)
New 5-layer ethanol resistant 5/16" rubber fuel hose is newly designed to resist the alcohol/ethanol in todays new fuels. Compatible with E-85, Methanol, Ethanol, Gasoline and Gasohol....see more
New 5-layer ethanol resistant 5/16" rubber fuel hose is newly designed to resist the alcohol/ethanol in todays new fuels. Compatible with E-85, Methanol, Ethanol, Gasoline and Gasohol.
Don't take a chance on old outdated inferior rubber fuel hose that is not rated for use with todays new fuels.
Made in the USA
Rated to 50 PSI
Select total length required, for example if you order a qty of 6 you will receive a 6 foot length of hose.…see more
- Part Number
- 4298F5/16
Expansion Plug 1/2" (Qty:5)
Specifications:
Diameter: 1/2"
Material: Aluminum
Quantity: 5 plugs
Used on the following carburetors:
Carter BBD
Ford/Motorcraft 1100/1101
Ford/Motorcraft 2100/2150
Rochester Quadrajet
Rochester Dualjet…see more
- Part Number
- 4322C
- Servicing Bi-Metal Choke Springs
- Ethanol (E-10) fuel in carbureted engines
- Where do I locate my carburetor number?
- How to Test a Vacuum Break / Pulloff
- #4802 Idle Pickup Tubes
- #3622 Power Piston Retaining Bushing
- O-Ring Inlet Repair Fuel Fitting
- #2702 Secondary Air Valve Spring Tension
- #4231B - Air Cleaner Repair Bracket
- Needle & Seats
- #2701 Secondary Air Valve Cam Replacement
- #2460-82 Changing Primary Metering Jets
- #2251/2252/2253 Fuel Filter Replacement
- #1742/1743 Secondary Well Plug Fix
- Float level adjustment for Quadrajet and Dualjet Carburetor
- Servicing the tamper resistant choke cover on Rochester carbs
- #1310-SR Mixture Control Solenoid Adjust
- What is a Carter Quadrajet?
- Quadrajet Model Designations
- Edelbrock Quadrajets
- #1003 Accelerator Pump Styles
- Exploded View 4MV 1975 thru
- Exploded View 4MV 1971 thru 1974
- Exploded View 4MV 1967 thru 1970
- Exploded View 4MV 1966
- Fuel Pressure
- Power Piston & Primary Metering Rods
- Fuel Inlets
- Exploded View 2G / 2GV
All Topics
- Carburetor Tech Info
- Mercury Marine Mercarb Carbureto
- Rochester 2G/Two Jet Tech
- Rochester Quadrajet Tech
Articles RSS Feed
Submit An Article